Baxton BBT5222 User manual

Read this instruction carefully. See hardware and furniture part list for guidance.
Be sure all parts are complete, before you assemble. Place all wooden furniture
parts on a clean and flat soft surface to prevent from being scratched.
Follow the figure to start assembling.
CAUTIONS :1. Do not FULLY - TIGHTEN the nut or nut bolt until all nut or bolt is ready assembed.
2. Do not OVER - TIGHTEN the nut or bolt to avoid causing damages to the thread.
3. Keep all hardware parts out of reach of children.
NOTE : THE LIST AND QUANTITY SHOWN ARE FOR 1 UNIT ASSEMBLY.
Tool needed : Screwdriver & Hammer (not provider).
ASSEMBLY INSTRUCTIONS
MODEL : BBT5222 SWIVEL BAR STOOL
HARDWARE LIST
ITEM DESCRIPTION QTY
1 JCBC BOLT M6 x 20mm 4pcs
2 JCBC BOLT M6 x 50mm 8pcs
3 WOOD SCREW M4 x 25mm 4pcs
4 WOOD SCREW M4 x 32mm 4pcs
5 M6 FLAT WASHER 4pcs
6 M6 SPRING WASHER 12pcs
7M4 ALLEN KEY (BALL SHAPE) 1pc
8 WOOD DOWEL M8 x 35mm 4pcs
9JCBB BOLT M8 x 50mm(BLACK) 4pcs
10 M8 HEX NUT (BLACK) 4pcs
11 M8 SPRING WASHER 4pcs
12 M8 FLAT WASHER 4pcs
13 SPANNER (13mm) 1pc
14 M5 ALLEN KEY (BALL SHAPE) 1pc
STEP 1
C
PART LIST
ITEM DESCRIPTION QTY
ACHAIR FRAME 1pc
BCHAIR LEG 2pcs
CSIDE RAIL 2pcs
DSWIVEL PLATE 1pc
ESIDE STRETCHER 2pcs
FSUPPORT WOOD 2pcs
8
x2
STEP 2
1 of 4
x2 Note : Loosely fit the bolts.
7
2
6
B
C

STEP 3
ASSEMBLY INSTRUCTIONS
STEP 4
2 of 4
STEP 3.1 STEP 3.2
Tighten all the bolts
at this stage.
STEP A
STEP B
x2
x4
x2
Note : Loosely fit the bolts.
7
2
6
2
7
Follow the label direction to fix the
support wood as picture shown.
F
E
B

STEP 5
ASSEMBLY INSTRUCTIONS 3 of 4
D
3
D9
14
12
11
10
13
STEP A
STEP B

STEP 6
ASSEMBLY INSTRUCTIONS
STEP 7
4 of 4
A
B
56
7
1
WARNING
1. Do Not stand on this swivel bar stool.
Do Not use this swivel bar stool step ladder.
2. Use this product only for seating one person at one time.
3. Do Not use this bar stool unless all bolts,screws and knobs are filmy
secured.
4. Failure to follow these warning could result in serious injury.