Baxton BBT6651 User manual

Read this instruction carefully. See hardware and furniture part list for guidance.
Be sure all parts are complete, before you assemble. Place all wooden furniture
parts on a clean and flat soft surface to prevent from being scratched.
Follow the figure to start assembling.
CAUTIONS :1. Do not FULLY - TIGHTEN the nut or nut bolt until all nut or bolt is ready assembed.
2. Do not OVER - TIGHTEN the nut or bolt to avoid causing damages to the thread.
3. Keep all hardware parts out of reach of children.
NOTE : THE LIST AND QUANTITY SHOWN ARE FOR 1 UNIT ASSEMBLY.
Tool needed : Screwdriver (not provider).
ASSEMBLY INSTRUCTIONS
MODEL : BBT6651 FULL BED
STEP 1 STEP 2
1 of 2
HARDWARE LIST
ITEM DESCRIPTION QTY
1 JCBC BOLT M6 x 20mm 8 PCS
2 JCBB BOLT M8 x 16mm 4 PCS
3 JCBB BOLT M8 x 30mm 6 PCS
4M6 SPRING WASHER 8 PCS
5M6 FLAT WASHER 8 PCS
6M8 SPRING WASHER 2 PCS
7M8 FLAT WASHER 2 PCS
8M4 ALLEN KEY (BALL SHAPE) 1 PC
9M5 ALLEN KEY (BALL SHAPE) 1 PC
10 WOOD SCREW M3.5 x 16mm 8 PCS
11 BED SLAT CENTER FITTER 12 PCS
12 BED SLAT SIDE FITTER 24 PCS
PART LIST
ITEM DESCRIPTION QTY
AHEADBOARD 1 PC
BFOOTBOARD 1 PC
CSIDE RAIL (L&R) 2 PCS
DCENTER RAIL 1 PC
ECENTER SUPPORT LEG 3 PCS
FCENTER SUPPORT 2 PCS
GLEG (L&R) 2 PCS
HBED SLAT 24 PCS
5
1
4
STEP (B)
8
2
E
D
9
B
C
CL
R
3
A
STEP (A)
Loosely fit bolt (3) into Headboard (A) picture shown.
Loosely fit bolt (2) into Footboard (B) as picture shown.
Don't screw tied
B
GLG
R

ASSEMBLY INSTRUCTIONS 2 of 2
STEP 3 STEP 4
STEP 5 STEP 6
* When moving the bed position, the center support legs
must be adjust to be straight to avoid any broken problem.
Back view(Headboard)
STEP (A)
STEP (B)
76
39
9
12
H
11
H
H
12
STEP (A)
STEP (B)
H
11 H12
**Finish step 3,
Please screw tied the step 2 bolt.
A
CL
CR
STEP (A)
D
C
F
10
STEP (B)
Note: Assemble (F) vertically as picture shown