Bay Networks 5380 Operation and maintenance manual
Warning Notice: Model 5380/5580 Net Modules
*114035-A*
Special Notice
System 5000 Net Module Removal Procedure
When you remove a net module from a Model 5380 Ethernet Router or Model 5580 Token Ring
Router, you must lift the module straight up, parallel to the baseboard. Grasp the board close to the
connector using both hands; do not pull the board up from one end. The following illustration
shows the correct and the incorrect way to remove a net module.
Refer to the
Quick Installation and Reference Guide for the System 5000 Net Modules
(Bay Networks part number 112769-A) for information about how to install the net modules.
WARNING:
If you rock the module back and forth or side to side, you can
bend the connector pins. When you attempt to reinstall a net module with bent
connector pins, you can damage the net module and the baseboard.
7202
Incorrect
Correct
Other manuals for 5380
5
This manual suits for next models
2
Table of contents
Other Bay Networks Network Router manuals
Bay Networks
Bay Networks BayStack ARN Routers none Installation guide
Bay Networks
Bay Networks Nautica 200 Instruction Manual
Bay Networks
Bay Networks 5380 How to use
Bay Networks
Bay Networks Nautica 200 Instruction Manual
Bay Networks
Bay Networks Nautica 250 User manual
Bay Networks
Bay Networks 5380 Instructions for use
Bay Networks
Bay Networks 58000 Installation and operating manual
Bay Networks
Bay Networks 5380 User manual
Bay Networks
Bay Networks 5000 User manual
Bay Networks
Bay Networks 5782 User manual
