BayNexus BN-HH-G Series User manual

BayNexus
BN-HH-G
User Manual

Welcome
BN-HH-G series wireless data terminal is a
high-performance intelligent mobile handheld terminal
device developed, designed and produced by BayNexus.
It adopts a special mobile medical operating system
with safe and reliable performance, supports RFID
electronic tag reading.

Device Description
Top View
①Power Light
②Camera
③Display

Back View
①RFID
②Speaker

Side View
①Volumn Key
②Light Key
③Scan Key
④Power Key
⑤Scan Key

Charge/Data transmission
Data transmission and charge
①Connect one end of the USB data cable terminal to
the device;
②Connect the other end of the USB cable to the
computer to transmission data and charge

Seater Charger
①Connect the power adapter, USB data cable and
seater charger together;
②Connect the power adapter to the power supply;
③Put the device into the seater charger in the
correct way and start charging.

Standby / wake-up Device
Power On
1. Press the device power key for more than 2 seconds and
release it to start the machine；
Standby and Wake-up Device
1. When the device is on, press the power key and release
it to enter the standby state
2. When the terminal is in standby, press the power key
and release it to wake up the device.
Reboot Device
When the device needs to be restarted, long press the
power key and release it (more than 2 seconds), click the
"restart" software key on the screen, and the terminal can
be restarted.
Power Off
When the terminal needs to be shut down, long press the
power key and release it (more than 2 seconds), and click
the "shut down" software key on the screen to shut down
the terminal.

Charge Lamp
Lamp of Charge State
Green
Battery full or near full
Orange
During charging, the power is higher
than 15%
Red
During charging, the power is less
than 15%
Use RFID Reading
RFID reading distance is in the range of 0-200cm, which
can separate objects and quickly identify electronic tags.
1. Enter the application software interface, set the key
and customize the scanning key function;
2. Align the RFID identification area on the back of the
wireless data terminal with the RFID electronic tag;
3. Press the scan key to read RFID electronic tag
information;
4. When reading, adjust the distance between the

wireless data terminal and the electronic tag to
achieve the best reading effect;
5. After reading the electronic tag information, the
terminal sends a prompt tone and displays the RFID
electronic tag information on the application interface.

Warranty scope
The warranty period of this product is 12 months from the
date of purchase.
During the product warranty period, for any fault caused
by the quality of the product itself, please contact the
manufacturer with the purchase certificate to enjoy the
free warranty.
There is no free warranty under the following
circumstances:
Damage caused by self disassembly;
Faults and man-made mechanical damage caused by water
ingress or falling;
Failure or damage caused by force majeure.