BCP SKY2962 User manual

SKY2962Ver. 4
Writing Desk Workstation
INSTRUCTION
MANUAL

Please retain these instructions for future reference.
NOTICE
•Do not stand on or use any part of this product as a step ladder.
•Firmly secure all bolts, screws and knobs before use.
•Reconfirm that all bolts, screws, and knobs are secure every 90 days.
•If the outer wood shell covers a screw hole, use a screwdriver to carefully poke through the wood shell
to reveal the screw hole.
•Product is intended for indoor use only.
•If any parts are missing, broken, damaged, or worn, stop using this item until repairs are made and/or
factory replacement parts are installed.
•Do not use this item in a way inconsistent with the manufacturer’s instructions as this could void the
product warranty.
•To clean the desk, use a wet cloth that has been wrung out. Then, wipe it down once more with a dry
cloth.
•Place the desk on smooth, flat ground. Do not use it in the following places:
- Outdoors
- Slanted ground
- Direct sunlight
HARDWARE
1
4 PCS
M2 x 10mm
SCREW
5
2 PCS
BRACKET
M5 x 15mm
SCREW
2
2 PCS
M6 x 30mm
SCREW
3
10 PCS
M8 x 50mm
SCREW
4
8 PCS
TOOLS REQUIRED
UP TO 30 MIN.
ASSEMBLY
1 PERSON
ASSEMBLY
200 LBS
CAPACITY
LBS
ALLEN WRENCH
(PROVIDED)
PHILLIPS/FLATHEAD
SCREWDRIVER
(PROVIDED)
2|

| 3
D
4 PCS
DIVIDER
PARTS
1 PC
TABLETOP
A
2 PCS
DRAWER
B
1 PC
HUTCH BACKBOARD
F
E
1 PC
HUTCH TOP
4 PCS
LEG
C
PRODUCT ASSEMBLY
1Attach part C legs to part A tabletop with two part 4 screws per leg.
A
Cx4
4x8

4|
PRODUCT ASSEMBLY
2Attach four part D dividers to the part F hutch backboard with eight part 3 screws.
Attach the hutch backboard to the part A tabletop with two part 3 screws.
3x10
D
x4 F

| 5
PRODUCT ASSEMBLY
3
4Slide in the part B drawers.
Bx2
Locate one part B drawer and remove the screw from the drawer knob.
Place the drawer knob on the front of the drawer and secure with the same screw.
Repeat to assemble the second drawer.

6|
PRODUCT ASSEMBLY
5Attach the part B drawers to the part F hutch backboard with two part 2 screws.
2x2

| 7
7
PRODUCT ASSEMBLY
6Attach two part 5 brackets to the part E hutch top with two part 1 screws.
NOTE: The bracket has a longer and shorter side. Attach the shorter side to the hutch top, and
the long side the backboard.
Attach the part E hutch top to the hutch backboard with two part 1 screws.
5
1
E
x2
x2
E

All items can be returned for any reason within 60 days of the receipt and will receive a full refund as long
as the item is returned in its original product packaging and all accessories from its original shipment are
included. All returned items will receive a full refund back to the original payment method. All returned
items will not be charged a re-stocking fee.
All returned items require an RA (Return Authorization) number, which can only be provided by a Best
Choice Products Customer Service Representative when the return request is submitted. Items received
without an RA may not be accepted or may increase your return processing time. Once an item has been
received by Best Choice Products, refunds or replacements will be processed within 5 business days.
All returns must be shipped back to the Best Choice Products Return Center at the customer’s expense. If
the reason for return is a result of an error by Best Choice Products then Best Choice Products will provide
a pre-paid shipping label via email. Boxes for return shipping will not be provided by Best Choice Products,
and is the customer’s responsibility to either use the original shipping boxes or purchase new boxes.
Pictures may be required for some returns to ensure an item is not damaged prior to its return. Items
returned are not considered undamaged until they are received by Best Choice Products and verified as
such. All damages to items are the customer’s responsibility until the item has been received by and
acknowledge by Best Choice Products as undamaged.
PRODUCT WARRANTY INFORMATION
Manufacturer and seller expressly disclaim any and all liability for personal injury, property damage or
loss, whether direct, indirect, or incidental, resulting from the incorrect attachment, improper use,
inadequate maintenance, unapproved modification, or neglect of this product.
HELP CENTER
Product Assembly
Product InquiryChat Support Returns & Refunds
Orders FAQ
WARNING
Question about your product? We're here to help. Visit us at:
help.bestchoiceproducts.com
CHAT
US!