Beheart W1 User manual

Smart Sonic Electric Toothbrush
User Manual
Product name： Electric Toothbrush
Product model： W1
Exporter company：
Beheart Technology Nanjing Co., LTD/Room 1004, Building E08-2, Suning Huigu,
No . 268,Jiqingmen Street, Gulou District, Nanjing,jiangsu province,China;
Fel： 025-58766939 Fax：[phone]
Manufacturer：
Beheart Technology Nanjing Co., LTD/Room 1004, Building E08-2, Suning Huigu,
No . 268,Jiqingmen Street, Gulou District, Nanjing,jiangsu province,China;
Fel： 025-58766939 Fax：[phone]

Safety instructions
In the first day of using this electric toothbrush, your gums may bleed
slightly, because the gums are not used to this efficient cleaning.
In general, bleeding should stop within 1 to 2 weeks. If more than two
weeks, you should stop using this toothbrush and consult your dentist.
Attention
·Please check if the product has obvious damage on before using;
If the product is dropped or destroyed badly, please don’ t use it.
·Before connecting the power supply, check whether the voltage of the
local power supply is consistent with the voltage marked on the
product;
·The power cord should not be used outdoors in the sun;
·Do not use a toothbrush in a bath or shower;
·Do not share the brush head with others;
·Do not wrap the power cord around the toothbrush handle when it is
powered on;
·Do not place metal objects on the power cord when it is energized.

Warning
·If you are undergoing treatment for any oral care condition, consult
your dental professional prior to use.
·This product complies with safety standards for electromagnetic devices.
Please consult your doctor or implantable device manufacturer about
the questions of pacemakers or other implantable devices before using it.
·This product is only designed for cleaning teeth, gums and tongue.
Do not use it for any other purposes. If you feel any discomfort or pain,
please stop using this product and consult your dentist；
·When charging, please ensure that the charging port is dry;
·When charging, please use the charger with 5V/1000MA---2000MA
(Purchase separately)
·Please do not charge the product for a long time without being looked
after. The maximum charging time should be within 24 hours;
·Children shall not be allowed to use, clean and maintain the product
without being looked after;
·Do not place the power cord in water or any other liquid;
·Do not connect to the power supply when there is liquid in the power plug;
·This product has a rechargeable battery, please do not put it into fire,
or charge,use and place it it at high temperature;
·Do not knock or drop the product. If the product is damaged due to
collision or falling, please stop using it;
·Do not modify, disassemble or repair the product by yourself.

① Screen
② On/Off/Pause
③ Brush Head
⑤ Power Cord④ Charging Port
Product introduction
* The user interface and other illustrations of the product accessories in
the manual are schematic diagrams for reference only. Due to the
update and upgrade of the product, the actual product may be slightly
different from the schematic diagram, please take the actual product
as the standard.

First Time Use
The toothbrush will wake up by pressing the ON/OFF button for the first time on
a brand-new toothbrush. The bluetooth function will be activated and remain
on. After installing "Beheart" App, please complete the prompts to complete
the connection and settings for the toothbrush;
Install APP
You can installing "Beheart" App from App market. After installing, please search
and conncet the toothbrush.
*Tips: The connection in the mobile phone "System Settings-Bluetooth Settings"
is invalid.
Toothbrush Settings
After installing the "Beheart" App, connect to Bluetooth (toothbrush vibrates
twice when the Bluetooth connection in App is successful), and set the smart
recommended mode through the APP. After the setting is successful, the smart
recommended mode will become the first mode in the mode list.
Measuring Time/Reminders For Brushing
The default brushing time is 2 minutes, and there will be a momentary change
in the vibration state every 30s to remind the user that the tooth area needs to
be changed for brushing.
Check Brushing Records In App
After brushing your teeth, the result of your brushing will be displayed on the
screen of the toothbrush. After connecting to the App, your more detailed tooth
brushing data will be displayed on the homepage.

Power On
Pick up the toothbrush or short press both can turn on the toothbrush(for the first
time you need to press the button for 1.5s to turn it on), time will be displayed on
the screen, click to enter the initial interface; If there is no action within 20s after
the screen is turned on, the toothbrush will automatically shut down.
Switching Mode
You can press and hold the button for 1 second to switch mode before toothbrush
running and short press to run the selected mode. During the running state, you
can also press and hold the button for 1 second to switch mode, screen will show
the corresponding icon and the toothbrush will restart 2-minutes countdown.
Battery Status And Charging
The current power will be displayed when the device is turned on. When the
power is lower than 5%, the battery power is Yellow. When the battery power is
red, please charge the toothbrush immediately (it’s not recommended to use
the toothbrush when the power is less than 5%). When the power is lower than
3%, the screen will show the picture of empty power with short press. At the
same time, the toothbrush vibrates for 0.5s and does not start. During charging,
the screen shows the current charge and breathe light effect. After charging,
please be sure to cover the charging port tightly before starting to use the
electric toothbrush.

Brushing Modes
①Standard Mode：
Two-minutes brushing with normal strength,reminding of changing areas each
30 seconds, it offers the feedback after two-minutes brushing. The feedback
icon will last for 5 seconds before the standby mode.
②Whitening Mode：
Brushing for two minutes with polishing and cleaning modes, reminding of
changing areas each 30 seconds, it offers the feedback after two-minutes
brushing.The feedback icon will last for 5 seconds before the standby mode.
③Deep Mode：
Clean teeth thoroughly and deeply with maximum force for 2 minutes,
reminding of changing areas each 30 seconds, it offers the feedback after
two-minutes brushing.The feedback icon will last for 5 seconds before the
standby mode.
④Gentle Mode：
Brushing sensitive areas for two minutes with gentle force, reminding of
changing areas each 30 seconds, it offers the feedback after two-minutes
brushing. The feedback icon will last for 5 seconds before the standby mode.
⑤Massage Mode：
Brushing teeth with comfortable ways reminding of changing areas each 30
seconds,it offers the feedback after two-minutes brushing, The feedback icon
will last for 5 seconds before the standby mode.
⑥Recommended Mode：
After installing the "Beheart" App, connect to Bluetooth In the App, you can
set personal oral conditions and other information, and the system will
analyze the data to customize the most suitable brushing plan to achieve the
best oral cleaning and care effect.

Icon Introduction
Selecting Interface Using Interface
Change
Brush Head Replacement Reminder
* After connecting to the App, when the electric toothbrush has been used for
more than 90 days, the App will actively remind the brush head to be replaced.
power display
mode selection
current mode
countdown
(running state)

excellent good poor
③Short press the button during the running state will pause the operation; and
short press again within 20 seconds to continue running; more than 20s of
misoperation will enter sleep mode and the brushing result will be displayed
on the screen.(When the toothbrush is puased, you can press and hold the
button for 2s to end brushing).
④For better cleaning, slowly move the brush head at 45 angles from the bristles
to the gums.
Using tips
①There will be 3s-strength’ s change from weak to strong when starting to
prevents toothpaste splashing.
②During the process of brushing, there will be a short pause 30 seconds intervals
to remind you to move to the next quadrant of your mouth. When brushing for
2 minutes, the toothbrush will automatically stop working, and the icon of the
tooth area will be displayed on the screen to remind you whether the cleaning
area is comprehensive or not.

0.5-0.8mm
Environmental protection
When the electric toothbrush reaches its service life, the internal battery may need to
be removed and properly recycled according to the laws and regulations of the
country or region where it is located. If the battery cannot be removed, please turn
the product to the recycling center designated by the government.
Change Brush Head
Make sure that the direction of the bristles of the toothbrush head is consistent
with the front direction of the toothbrush handle, and install the brush head
vertically downwards on the handle, and ensure that there is a certain gap of
0.5-0.8mm between the two components (to avoid the collision of the toothbrush
head with the handle in high-frequency vibration); Do not install the brush head
by twisting vigorously.(otherwise, the brush head and body may be damaged.)

Basic parameters
Product name： BEHEART Smart Sonic Electric Toothbrush White Key W2
Product model： W1
Rated voltage： 3.3V
Rated power: 1.5W
Input parameter: 5V 1.0A
Charging time: 150min
Waterproof grade: IPX 7
Products information: Made in China
Manufacturer: Beheart Technology Nanjing Co., LTD
Address: Room 1004, Building E08-2, Suning Huigu, No. 268,
Jiqingmen Street, Gulou District, Nanjing
Executive standard: GB 4706.1-2005, GB 4706.59-2008
Guarantee
We grant 1 year limited guarantee on the product commencing on the date of
purchase. Within the guarantee period, you will receive a free warranty service
for any product failure or non-human damage that occurs under the normal use.
Free warranty service does not cover: toothbrush head; Damage caused by the
use of unauthorized accessories; Normal wear and tear, including tear, scratch,
wear, discoloration or fading; Unauthorized maintenance, misuse, collision,
abuse, infusion, alteration, incorrect use; Damage caused by force majeure;
The performance is damaged due to human reasons.
When you need to contact us, please scan the QR code.

Eliminate Problem
Brush head
can’ t match
handle
Problem
It doesn’ t
work
The vibration
of brush head
is weak
Possible reason Remedy
Under the protection
of charging
Battery has a very
low charge level
There are something
in the brush head jack
There are something
on the power shaft
Not the genuine
brush head
Brush head doesn’ t
install well
There are something
between brush head
and handle
Cut off the power
Charge the toothbrush
Get something out
of jack with tools
Clean the power shaft
Change with genuine
brush head
Install brush head again
Cleaning the
foreign matter

FCC Statement
This device complies with part 15 of the FCC rules. Operation is subject to the following two
conditions: (1) this device may not cause harmful interference, and (2) this device must accept
any interference received, including interference that may cause undesired operation.
Changes or modifications not expressly approved by the party responsible for compliance could
void the user's authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation. This equipment generates
uses and can radiate radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If this equipment does
cause harmful interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the interference by
one or more of the following measures:
•Reorient or relocate the receiving antenna.
•Increase the separation between the equipment and receiver.a
•Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
•Consult the dealer or an experienced radio/TV technician for help.
The device has been evaluated to meet general RF exposure requirement. The device can be used
in portable exposure condition without restriction.