Behringer Ultragain Pro MIC2200 Manual

ULTRAGAIN PRO MIC2200
Audiophile Vacuum Tube Microphone/Line Preamplier
Technical Specications

2ULTRAGAIN PRO MIC2200 Technical Specifications
ULTRAGAIN PRO MIC2200
Audiophile Vacuum Tube Microphone/Line Preamplier
Ultra-low noise discrete microphone/line preamplier with hand-selected 12AX7 tube for ultra-musical sound
Mic input stage based on discrete, conjugate transistor pair circuitry
Ultra-wide bandwidth from 10 Hz to 200 kHz for “open” sound
Integrated fully parametric EQs with dedicated center frequency, bandwidth and level controls
Independent line driver for converting -10 dBV into +4 dBu pro level
Soft-mute +48 V phantom power to avoid switch-on thumps
Fully tunable and switchable 12 dB high-pass lter
Switchable phase reverse for correcting phase-related problems
Accurate 12-segment LED metering for output level
Servo-balanced inputs and outputs with ¼" TRS and gold-plated XLR connectors
High-quality components and exceptionally rugged construction ensure long life
Conceived and designed by BEHRINGER Germany
Specications
Audio Input
Microphone
Connectors XLR
Type transformerless, DC-decoupled input
Impedance 3 k Ohms balanced
Maximum input level +10 dBu balanced and unbalanced
CMRR typ. 40 dB, >55 dB @ 1 kHz
Line
Connectors XLR and ¼" jack
Type transformerless, DC-decoupled input
Impedance 60 kOhms balanced
Maximum input level +23 dBu balanced and unbalanced
CMRR typ. 40 dB, >55 dB @ 1kHz
Audio Output
Connectors XLR and ¼" jack
Type electronically servo-balanced
outputstage
Impedance 60 Ohms balanced,
30 Ohms unbalanced
Maximum output level +21 dBu balanced and unbalanced
System Specications
Frequency response 10 Hz to 200 kHz, ±3 dB
Noise >94 dBu, unweighted, 22 Hz to 22 kHz
THD 0.011% typ. @ +4 dBu, 1 kHz, Gain 1
IMD 0.01% typ. SMPTE
Crosstalk <-88 dB, 22 Hz to 22 kHz
Function Controls
Mic gain variable (+10 dB to +60 dB)
Frequency (lo cut) variable (12 to 320 Hz)
Frequency (PEQ) variable (10 Hz to 20 kHz),
dependent on x10 and x0.1 switch
Bandwidth variable (0.03 to 2 octaves)
Level variable (-15 dB to +15 dB)
Output variable (-20 dB to +20 dB)
Function Switches
+48 V activates phantom power
Mic/line switches from line to mic preamplier
Phase rev. phase reverse (180°)
Lo cut activates the high-pass lter
x 0.1 switches the frequency control to
10Hz - 200 Hz
x 10 switches the frequency control to
1 kHz - 20 kHz
EQ in/out activates the parametric lter
Indicators
Clip clipping control LED
Output level 12-segment LED display:
-30/-24/-18/-12/-6/-3/0/+3/+6/
+9/+12/+18 dB
function switch LED indicator of every switch

3ULTRAGAIN PRO MIC2200 Technical Specifications
BEHRINGER is constantly striving to maintain the highest professional standards. As a result of these efforts, modifications may be made from time to time to existing products without prior notice. Specifications and appearance may differ from those listed
or illustrated.
TECHNICAL SPECIFICATIONS AND APPEARANCES ARE SUBJECT TO CHANGE WITHOUT NOTICE AND ACCURACY IS NOT GUARANTEED. BEHRINGER, KLARK TEKNIK, MIDAS, BUGERA, AND TURBOSOUND ARE PART OF THE MUSIC GROUP (MUSIC-GROUP.COM).
ALL TRADEMARKS ARE THE PROPERTY OF THEIR RESPECTIVE OWNERS. MUSIC GROUP ACCEPTS NO LIABILITY FOR ANY LOSS WHICH MAY BE SUFFERED BY ANY PERSON WHO RELIES EITHER WHOLLY OR IN PART UPON ANY DESCRIPTION, PHOTOGRAPH
OR STATEMENT CONTAINED HEREIN. COLORS AND SPECIFICATIONS MAY VARY FROM ACTUAL PRODUCT. MUSIC GROUP PRODUCTS ARE SOLD THROUGH AUTHORIZED FULLFILLERS AND RESELLERS ONLY. FULLFILLERS AND RESELLERS ARE NOT AGENTS
OF MUSIC GROUP AND HAVE ABSOLUTELY NO AUTHORITY TO BIND MUSIC GROUP BY ANY EXPRESS OR IMPLIED UNDERTAKING OR REPRESENTATION. THIS MANUAL IS COPYRIGHTED. NO PART OF THIS MANUAL MAY BE REPRODUCED OR TRANSMITTED
IN ANY FORM OR BY ANY MEANS, ELECTRONIC OR MECHANICAL, INCLUDING PHOTOCOPYING AND RECORDING OF ANY KIND, FOR ANY PURPOSE, WITHOUT THE EXPRESS WRITTEN PERMISSION OF MUSIC GROUP IP LTD. ALL RIGHTS RESERVED.
© 2013 MUSIC Group IP Ltd. Trident Chambers, Wickhams Cay, P.O. Box 146, Road Town, Tortola, British Virgin Islands
Power Supply
Mains voltages
USA/Canada 120 V~, 60 Hz
U.K./Australia 240 V~, 50 Hz
Europe 230 V~, 50 Hz
General Export Model 100 - 120 V~, 200 - 240 V~, 50 - 60 Hz
Power consumption max. 20 Watts
Fuse 100 - 120 V~: T 500 mA H
200 - 240 V~: T 250 mA H
Mains connection standard IEC receptacle
Physical
Dimensions (W x D x H) approx. 8.5 x 1.8 x 19"
approx. 217 x 44.5 x 483 mm
Net weight approx. 2.3 kg
Shipping weight approx. 3.4 kg