Behringer Ultrabass BA810 User manual

ULTRABASS BA810
Version 1.1 September 2004
Technical Specifications
ENGLISH

2
ULTRABASS BA810
BA810
NEUTRIK® and SPEAKON® are registered trademarks of their respective owners and are not affiliated with EHRINGER®.
ULTRABASS
High-Performance 2,000-Watt Bass Cabinet with riginal 8 x 10" BUGERA Aluminum
Cone Speakers and 1" Horn Driver
sReinforced chamber, front-ported bass cabinet for 2,000 Watts of power handling
sOriginal UGERATM HARD ATTACK Aluminum Cone Speakers
sUltra-fast, direct response and incredible attack
sSwitchable 1" custom-made horn tweeter for high-end punch
sUnique tweeter remote control via footswitch or EHRINGER MIDI FOOT CONTROLLER FC 1010
sInput and link outputs on 1/4" TS and professional speaker connectors (compatible with
NEUTRIK® SPEAKON®), impedance 4 Ohms
sRecessed carrying handles and integrated rollers for easy transportation
sShock proof metal grille, reinforced corners and rugged carpet covering
sExceptionally rugged construction for long life and durability
sConceived and designed by EHRINGER Germany

3
ULTRABASS BA810
BEHRINGER is constantly striving to maintain the highest professional standards. As a result
of these efforts, modifications may be made from time to time to e isting products without prior
notice. Specifications and appearance may differ from those listed or shown.
SPECIFICATIONS
High-power bass speakers 8 x 10" UGERATM
Aluminum cone speakers
Sensitivity 100 d @ 1 W / 1 m
Impedance 4 Ohm
Frequency response 42 Hz - 16 kHz
Power (RMS / Music) 2,000 W
Tweeter 1" tweeter driver
SPEAKER CONNECTIONS
Input/Link
2 professional
speaker connectors,
compatible with
NEUTRIK® SPEAKON®
(wired in parallel)
as well as one 1/4" TS
connector
DIMENSIONS/WEIGHT
Dimensions (W x H x D) 655 mm (25 4/5") x
1312 mm (51 5/8") x
407 mm (16")
Weight ca. 80.0 kg (176 lb)

4
ULTRABASS BA810
Technical specifications and appearance subject to change without notice. The information contained herein is correct at the time of printing. NEUTRIK®,
S EAKON® as well as the names of companies, institutions or publications pictured or mentioned and their respective logos are registered trademarks
of their respective owners. Their use neither constitutes a claim of the trademarks by BEHRINGER® nor affiliation of the trademark owners with
BEHRINGER®. BEHRINGER® accepts no liability for any loss which may be suffered by any person who relies either wholly or in part upon any
description, photograph or statement contained herein. Colours and specification may vary slightly from product. roducts are sold through our
authorised dealers only. Distributors and dealers are not agents of BEHRINGER® and have absolutely no authority to bind BEHRINGER® by any express
or implied undertaking or representation. No part of this manual may be reproduced or transmitted in any form or by any means, electronic or mechanical,
including photocopying and recording of any kind, for any purpose, without the express written permission of BEHRINGER Spezielle Studiotechnik
GmbH. BEHRINGER® is a registered trademark.
ALL RIGHTS RESERVED. © 2004 BEHRINGER Spezielle Studiotechnik GmbH.
BEHRINGER Spezielle Studiotechnik GmbH, Hanns-Martin-Schleyer-Str. 36-38,
47877 Willich-Münchheide II, Germany
Tel. [phone], Fax [phone]