Manufactured by Beka, Inc. • 542 Selby Ave • St. Paul, Minnesota 55102 • USA
1-888-999-(BEKA)2352 • www.Bekainc.com
Contents:
4 maple end pieces (2 with a slot)
2 balc birch sides
1 boom piece
16 wood screws
4 swivel casters
A phillips screwdriver is needed for assembly.
Step 1:
With the boom’s white side facing up, slide the sloed
maple end pieces and one of the balc birch side pieces into
posion as shown. Secure with 4 screws.
Step 2:
Place the remaining balc birch side with it’s slot down
and in, to capture the boom piece. Secure with 4 screws.
Step 3:
Posion remaining maple end pieces so the holes in their
ends line up with the remaining holes in the sides. Turning
the parally assembled box on it’s side may make it easier
to secure the pieces with the remaining screws.
Step 4:
Turn the assembled trundle (box) upside down, so the
holes in the edge of the two sloed maple end pieces are
“up”.
Press the 4 swivel casters into place in the holes provided.
Be careful to insert them fully (do not pinch your ngers
in this process!).
Turn
the
assembled Trundle right side up
Trundle
Assembly Instrucons
Cauon: This product is not designed as a ride-on toy. It is
intended for use as a moveable storage container.
Please supervise children accordingly.
Warning – Adult Assembly Required!
Enclosed hardware includes sharp points and small parts
packed in plasc bags, so may present hazards to children
prior to assembly.
Dispose of plasc bags, extra hardware and any packing
material to avoid potenal choking hazards.
Aer assembly, an adult should check hardware regularly to
insure it is ght.