Beko DEN59533XAD User manual

Dishwasher
User’s Manual
EN
1874450100_AC_BEKO_E8P_EN/13-03-20.(11:22)

Explanation of symbols
Throughout this User Manual the following symbols are used:
C
Important information or useful
hints about usage.
A
Warning for hazardous
situations with regard to life and
property.
B
Warning for electric shock.
Packaging materials of the
product are manufactured
from recyclable materials in
accordance with our National
Environment Regulations.
Do not dispose of the packaging materials together with the domestic or other
wastes. Take them to the packaging material collection points designated by the local
authorities.
Please read this user manual first!
Dear Customer,
We hope that you get the best results from your product which has been manufactured
with high quality and state-of-the-art technology. Therefore, please read this entire
user manual and all other accompanying documents carefully before using the product
and keep it as a reference for future use. If you handover the product to someone else,
give the user manual as well. Follow all warnings and information in the user manual.
Remember that this user manual is also applicable for several other models. Differences
between models will be identified in the manual.
This product was manufactured using the latest technology in environmentally friendly conditions.

CONTENTS
1 INSTRUCTIONS FOR SAFETY
AND ENVIRONMENT 4
General safety .......................................4
Intended use..........................................4
Children’s safety....................................5
Disposing of packaging material ........5
Transportation of the product............5
Compliance with WEEE Directive and
Disposing of the Waste Product .........6
Compliance with RoHS Directive........6
Package information ............................6
2 DISHWASHER 7
Overview ................................................7
Fan drying system.................................8
Technical specications.......................8
3 INSTALLATION 9
Appropriate installation location .......9
Connecting water supply.....................9
Connection to the drain .................... 10
Adjusting the feet.............................. 10
Aquasafe+ ...........................................11
Electrical connection..........................11
Initial use..............................................11
4 PREPARATION 12
Tips for energy saving........................12
Water softening system ....................12
Adjusting the water softening
system ..................................................12
Adding salt ...........................................14
Detergent.............................................15
Adding Liquid/Gel Detergent and
Rinse Aid ..............................................16
Powder Detergents ........................... 18
Tablet detergents .............................. 18
Cutlery basket .................................... 22
Cutlery basket .................................... 22
Collapsible lower basket tines ......... 23
Collapsible lower basket tines ......... 23
Tray Wash Supports........................... 24
SoftTouch Accessory......................... 24
Lower Basket Glass Holder............... 24
Lower basket multipurpose / height
adjustable service rack ..................... 25
Lower basket bottle wire.................. 26
Upper basket height adjustable rack26
Upper basket multipurpose service
rack....................................................... 26
Adjusting the height of the upper
basket ...................................................27
Collapsible upper basket wires........ 28
Height setting with empty basket .. 28
Ceiling cutlery basket........................ 29
Ceiling cutlery basket........................ 29
5 OPERATING THE PRODUCT30
Programme Selection / Programme
Cancel key.............................................31
Function Keys ......................................31
Preparing the machine.......................31
Programme selection.........................31
Auxiliary functions ............................ 33
Scheduling the washing time .......... 36
Starting the programme................... 36
Cancelling the programme ................37
Salt indicator ( ) ...............................37
Rinse Aid indicator ( )......................37
End of programme ..............................37
Adjusting the amount of rinse aid....37
Water cut-o warning....................... 38
Overowing warning......................... 38
6 HOMEWHIZ FUNCTION 39
HomeWhiz Setup and User Account
Settings ............................................... 39
7 MAINTENANCE AND
CLEANING 43
Cleaning the outer surface of the
product ................................................ 43
Cleaning the interior of the machine43
Cleaning the lters ............................ 43
Cleaning the hose lter.....................44
Cleaning the impellers ...................... 45
Lower impeller assembly.................. 45
Upper impeller ................................... 45
8 TROUBLESHOOTING 46

4 Dishwasher / User’s Manual/50 EN
instructions for safety and environment
1
This section contains safety
instructions that will help to get
protected from risk of personal
injury or property damage. Failure
to follow these instructions shall
void all warranties.
General safety
•Never place the product
on a carpet-covered floor;
otherwise, lack of airflow
beneath the product will
cause electrical parts to
overheat. This will cause
problems with your product.
•Do not operate the product
if the power cable / plug is
damaged! Call the Authorised
Service Agent.
•Connect the product to a
grounded outlet protected
by a fuse complying with
the values in the “Technical
specifications” table. Do
not neglect to have the
grounding installation made
by a qualified electrician. The
manufacturer shall not be
liable for any damages that
will arise when the product
is used without grounding
in accordance with the local
regulations.
•The water supply and
draining hoses must be
securely fastened and remain
undamaged.
•Unplug the product when not
in use.
•Never wash the product by
spreading or pouring water
onto it! There is the risk of
electric shock!
•Never touch the plug with
wet hands! Never unplug by
pulling on the cable, always
pull out by grabbing the plug.
•The product must be
unplugged during installation,
maintenance, cleaning and
repairing procedures.
•Always have the installation
and repairing procedures
carried out by the Authorised
Service Agent. Manufacturer
shall not be held liable for
damages that may arise from
procedures carried out by
unauthorised persons.
•Never use chemical solvents
in the product. They bring
forth the risk of explosion.
•When you pull the upper and
lower baskets out completely,
the door of the product will
bear all the weight of the
baskets. Do not put other
loads on the door; otherwise,
the product may tilt.
•Never leave the door of
the product open apart
from loading and unloading
procedures.
•Do not to open the door
of the product when it is
running unless necessary.
Be careful for the rush of hot
steam when you open the
door.
Intended use
•This product has been
designed for domestic use.
•It must be used to do the
domestic type dishes only.

Dishwasher / User’s Manual 5 / 50 EN
instructions for safety and environment
•This appliance is intended
to be used in household and
similar applications such as:
- Staff kitchen areas in shops,
offices and other working
environments;
- Farm houses;
- By clients in hotels, motels
and other residential type
environments;
- Bed and breakfast type
environments
•Only dishwasher safe
detergents, rinse aids and
additives must be used.
•The manufacturer waives
any responsibility arisen
from incorrect usage or
transportation.
•The service life of your
product is 10 years. During
this period, original spare
parts will be available to
operate the product properly.
•This appliance can be used
by children aged from 8 years
and above and persons with
reduced physical,sensory
or mental capabilities or
lack of experience and
knowledge if they have
been given supervision or
instruction concerning use
of the appliance in a safe
way and understand the
hazards involved. Children
shall not play with the
appliance. Cleaning and user
maintenance shall not be
made by children without
supervision.
Chldren’s safety
•Electrical products are
dangerous for the children.
Keep children away from the
product when it is in use. Do
not let them to tamper with
the product.
•Do not forget to close the
door of the product when
leaving the room where it is
located.
•Store all detergents and
additives in a safe place
away from the reach of the
children.
Dsposng of
packagng materal
Packaging materials are
dangerous to children. Keep
packaging materials in a safe
place away from reach of the
children.
Packaging materials of the
product are manufactured from
recyclable materials. Dispose
of them properly and sort in
accordance with recycled waste
instructions. Do not dispose
of them with normal domestic
waste.
Transportaton of the
product
A
If you need to move the
product, do it in upright
position and hold from
the rear side. Slanting
the product onto its
front side may cause the
electronic parts in it get
wet and damaged.

6 Dishwasher / User’s Manual/50 EN
instructions for safety and environment
1. Unplug the product before
transporting it.
2. Remove water drainage and
water supply connections.
3. Drain the remaining water in
the product completely.
Complance wth
WEEE Drectve and
Dsposng of the
Waste Product
This product complies with
EU WEEE Directive
(2012/19/EU). This product
bears a classification
symbol for waste electrical and
electronic equipment (WEEE).
This product has been
manufactured with high quality
parts and materials which can be
reused and are suitable for
recycling. Do not dispose of the
waste product with normal
domestic and other wastes at the
end of its service life. Take it to
the collection center for the
recycling of electrical and
electronic equipment. Please
consult your local authorities to
learn about these collection
centers.
Complance wth RoHS
Drectve
The product you have purchased
complies with EU RoHS Directive
(2011/65/EU). It does not contain
harmful and prohibited materials
specified in the Directive.
Package nformaton
Packaging materials of the
product are manufactured
from recyclable materials in
accordance with our National
Environment Regulations. Do
not dispose of the packaging
materials together with the
domestic or other wastes. Take
them to the packaging material
collection points designated by
the local authorities.

Dishwasher / User’s Manual 7 / 50 EN
Dishwasher
2
Overvew
1. Upper basket
2. Cutlery basket
3. Lower basket
4. Automatic Liquid/Gel Detergent and Rinse
Aid Dosing System
5. Type Label
6. Control panel
7. Door
8 Lower impeller
9. Salt reservoir lid
10. Filters
11. Upper impeller
12. Upper basket rail
13. Upper cutlery basket ( depends on model )
14. Upper table ( depends on model )
15. Ceiling impeller ( depends on model )
16. Fan drying system ( depends on model )
16

8 Dishwasher / User’s Manual/50 EN
Dishwasher
Techncal specfcatons
Compliance to standards and test data / EC declaration of conformity
This product complies with the following EU directives;
Development, production and sales stages of this product comply with the safety
rules included in all pertaining European Community regulations.
2014/35/EU, 2014/30/EU, 93/68/EC, IEC 60436/DIN 44990, EN 50242
Power input 220-240 V, 50 Hz (see rating label)
Total power consumption 1800-2100 W (see rating label)
Heater power consumption 1800 W (see rating label)
Total current (depends on the model) 10 A (see rating label)
Drain pump power consumption 30 W (see rating label)
Water pressure 0.3 –10 bar (= 3 – 100 N/cm² = 0.01-1.0
Mpa)
C
Technical specifications may be changed without prior notice to improve the
quality of the product.
C
Figures in this manual are schematic and may not match the product exactly.
C
Values stated on the markings of the product or in the printed documents
accompanying the product are obtained in the laboratory on basis of the
relevant standards. Depending on operational and environmental conditions of
the product, these values may vary.
Note for test institutions:
Data required for performance tests shall be provided upon request. Requests can be
e-mailed to the following address:
dishw[email protected]
Do not forget to provide the code, stock and serial numbers of the product to be tested in
your request e-mail along with your contact information. Code, stock and serial numbers of
the product may be found on the type label attached to the side wall of the door.
Fan dryng system
(depends on model)
Fan drying system ensures efficient drying of your dishes.
It is normal to hear a different sound than that of washing cycle during fan operation.

Dishwasher / User’s Manual 9/ 50 EN
3Installation
Refer to the nearest Authorised Service
Agent for installation of your product. To
make the product ready for use, make sure
that the electricity, tap water supply and
water drainage systems are appropriate
before calling the Authorised Service Agent.
If they are not, call a qualified technician
and plumber to have any necessary
arrangements carried out.
C
Preparation of the location and
electrical, tap water and waste
water installations at the place
of installation is the customer's
responsibility.
B
Installation and electrical
connections must be carried
out by the Authorised Service
Agent. Manufacturer shall
not be held responsible
for damages arising from
processes carried out by
unauthorised persons.
A
Prior to installation, visually
check if the product has any
defects on it. If so, do not have
it installed. Damaged products
cause risks for your safety.
C
Make sure that the water inlet
and discharge hoses are not
folded, pinched or crushed
while pushing the product into
its place after installation or
cleaning procedures.
When placing the product, pay attention
not to damage the floor, walls, piping, etc.
Do not hold the product by its door or panel
to move it.
Approprate nstallaton
locaton
•Place the product on a solid and flat
floor that has sufficient load carrying
capacity! The product must be
installed on a flat surface in order for
the door to be closed comfortably and
securely.
•Do not install the product at places
where temperature may fall below 0ºC.
•Place the product at least 1 cm away
from the edges of other furniture.
•Place the product on a rigid floor. Do
not place it on a long pile rug or similar
surfaces.
B
Do not place the product on the
power cable.
•Make sure that you select a location
that will allow you to load and unload
the dishes in a fast and comfortable
manner.
•Install the product in a place close to
the tap and the drain hole. Select the
installation location by considering
that it will not be changed after the
connections are made.
Connectng water supply
C
We recommend attaching a
filter on the house/apartment
supply water inlet to protect
the machine from damages
that may arise from impurities
(sand, dirt, rust, etc.) coming
from the urban water supply
system or from your own water
system as well as to prevent
complaints such as yellowing or
sludge accumulation at the end
of washing.

10 Dishwasher / User’s Manual/50 EN
Installation
Permitted water temperature:
up to 25°C ( 60°C for products
equipped with Aquasafe+; please
refer toAquasafe+ section )
The dishwasher may not be connected to
open warm water devices or flow-through
water heaters.
•Do not use old or used water inlet
hose on the new product. Use the new
water inlet hose supplied with the
product.
•Connect the water inlet hose directly
to the water tap. Pressure coming
from the tap should be minimum 0.3
and maximum 10 bars. If the water
pressure exceeds 10 bars, a pressure
relief valve should be installed in
between.
•Open the taps completely after making
the connections to check for water
leaks.
C
Use a screw-on hose connector
to connect the water inlet hose
to a water tap with a ¾ inch
external thread. If required, use
a filter insert to filter deposits
from the pipes.
A
For your safety, close the water
inlet tap completely after the
washing programme is over.
Connecton to the dran
Water discharge hose can directly be
connected to the drain hole or sink’s
drainage. The length of this connection
must be min. 50 cm and max. 100 cm from
the floor. A discharge hose longer than 4
meters causes dirty washing.
Attach the water discharge hose to the
drainpipe without bending it. Tightly fix
the water discharge hose to the drainpipe
in order to prevent any dislocation of the
water discharge hose during operation of
the product.
min 300
min 120
max 1000
min 500
C
Drainpipe must be connected
to the sewage system and it
should not be connected to any
surface water.
Adjustng the feet
If the door of the product cannot be closed
properly or if the product swings when you
push it slightly, then you need to adjust
the feet of the product. Adjust the feet of
the product as illustrated in the installation
manual supplied with the product.
A
Dishwashers door must be
aligned properly otherwise hot
steam can escape! Danger of
serious burns, other injury or
may damage furniture.

Dishwasher / User’s Manual 11/50 EN
Installation
•The voltage and allowed fuse or breaker
protection are specified in the “Technical
specifications” section. If the current
value of the fuse or breaker in the house
is less than 16 Amps, have a qualified
electrician install a 16 Amp fuse.
•The specified voltage must be equal to
your mains voltage.
•Do not make connections via extension
cables or multi-plugs.
B
Damaged power cables must
be replaced by the Authorised
Service Agent.
B
If your dishwasher is equipped
with internal illumination, lamp
should only be replaced by the
Authorised Service Agent in
case of failures that may occur
on the lamp.
B
If the product has a failure, it
should not be operated unless
it is repaired by the Authorised
Service Agent! There is the risk
of electric shock!
Intal use
Before starting to use the product, make sure
that all preparations are made in accordance
with the instructions in sections “Important
safety instructions” and “Installation”.
•To prepare the product to do the dishes,
perform first operation in the shortest
programme with detergent while the
machine is empty. During the initial use,
fill the salt reservoir with 1 litre of water
prior to filling it with salt.
A
There might be a small amount
of water left in the product
after factory quality control
tests. This has no harm on the
product.
Aquasafe+
(depends on model)
The Aquasafe+ system protects against
water leaks that may occur at the hose
inlet.Water contact with the valve box of
the system must be avoided to prevent
damage to the electrical system. If the
Aquasafe+ system is damaged, unplug the
product and call the Authorised Service
Agent.
A
As the hose set contains
electrical connections and
assemblies, never shorten
or lengthen the hose with
extension hoses.
Electrcal connecton
Connect the product to a grounded outlet
protected by a fuse complying with the
values in the “Technical specifications”
table. The manufacturer shall not be liable
for any damages that will arise when the
product is used without grounding in
accordance with the local regulations.
•Connection must comply with national
regulations.
•Power cable plug must be within easy
reach after installation.
B
Unplug the product after the
washing programme is over.

12 Dishwasher / User’s Manual/50 EN
Adjustng the water
softenng system
Washing, rinsing and drying performance
of your dishwasher will improve when
the water softening system is adjusted
correctly.
To adjust the system, first learn the water
hardness in your region and adjust as
indicated below.
PreparatIon
4
Tps for energy savng
Following information will help you use
the product in an ecological and energy-
efficient manner.
Wipe away any coarse food remnants on
the dishes before putting them in the
product.
Operate the product after filling it
completely.
When selecting a programme, consider
the table of "Programme data and average
consumption values".
Do not put more detergent than suggested
on the detergent package.
Water softenng system
The product is equipped with a water
softening system which reduces the
hardness of incoming water. This system
softens the supply water to a level that will
allow washing the dishes with the required
quality.
Dishwasher salt is used for this purpose.

Dishwasher / User’s Manual 13/50 EN
PreparatIon
Unpack the test
strip. Open the tap and
let the water ow for
approx. 1 minute.
Dip in the test strip
into the water for 1
second.
Take out the strip
from the water and
shake it.
Wait for 1 minute. Make the necessary
adjustment
according to the test
strip.
After detecting the water hardness:
1. After switching on your machine, press and hold the Menu key for 3 seconds.
C
Some models require pressing
Menu key once to enter settings
menu.
2. Using <- and +> keys, proceed until the water hardness setting indicator becomes on (“r”
position will be displayed).
3. Using the Selection key, adjust water hardness level according to the hardness of the
supply water. For correct setting please see "Water hardness level setting table".
4. Press On / Off key to save the setting.
Water hardness level adjustment table
Hardness
Level
English Water
Hardness °dE
German Water
Hardness °dH
French* Water
Hardness °dF Water Hardness Level Indicator
Level 0 0-5 0-4 0-8 Press the Selection key to switch the water hardness level
to position 1. (r1)
Level 1 6-9 5-7 9-13
Level 2 10-15 8-12 14-22 Press the Selection key to switch the water hardness level
to position 2. (r2)
Level 3 16-19 13-15 23-27 Press the Selection key to switch the water hardness level
to position 3. (r3)
Level 4 20-24 16-19 28-34 Press the Selection key to switch the water hardness level
to position 4. (r4)
Level 5 25-62 20-50 35-90 Press the Selection key to switch the water hardness level
to position 5. (r5)
Perform the same hardness level adjustment that you have set on the control panel also
with the regeneration adjustment switch. For example, if you have adjusted to “3” in the
control panel, also set the regeneration adjustment switch to 3.
Regeneration Adjustment Switch Level 0 Level 1 Level 2 Level 3 Level 4 Level 5
1 1 2 3 4 5

14 Dishwasher / User’s Manual/50 EN
PreparatIon
3. Add 1 litre of water to salt reservoir of
your machine only in initial use.
4. Add salt to the salt compartment. To
speed up dissolution rate of salt in
water, stir it with a spoon.
C
You can put about 2 kg of
softening salt into the salt
reservoir.
5. Replace the lid and tighten it when the
reservoir is full.
C
You need to add salt right before
starting the machine. Thus, the
overflowing salty water will be
flushed immediately, preventing
the risk of corrosion in machine.
In cases where you would not
start washing immediately,
run your machine empty in the
shortest program.
C
Since different salt brands in the
market have different particle
sizes and since the water
hardness may vary, dissolution
of the salt in water may take
a couple of hours. Therefore,
Salt Indicator remains on for a
while after adding salt into the
machine.
If the hardness level of the water that
you use is above 50°dH or if you are using
well water, than it is recommended to use
filter and water purification devices.If the
hardness level of the water that you use
is below 7°dH, there is no need to use salt
in your dishwasher. In this case, the Salt
Indicator light on the control panel of your
dishwasher will light continuously.
If the water hardness is set to level 1,
the Salt Indicator will light continuously
although it is not necessary to use salt. If
you use salt under this condition, salt will
not be consumed and the lamp will not
illuminate.
C
When moving, you will need
to set the water hardness
level of your dishwasher again
according to the information
above, depending on the water
hardness of the place you have
moved to.
If the water hardness level
of your machine is adjusted
previously, your machine
will display the most recent
hardness level adjustment.
C
Adjust the water softness
level according to the "Water
hardness level instruction"
supplied with your machine.
Addng salt
C
Use only special softening salts
produced particularly for the
dishwashers in your machine.
1. First take the lower basket out to add
softening salt.
2. Turn the salt reservoir lid counter-
clockwise to open it (A).

Dishwasher / User’s Manual 15/50 EN
PreparatIon
•Factory settings of the Automatic Liquid/
Gel Detergent Dosing System are based
on the detergent amount recommended
by detergent manufacturers.
•You can proceed to the Settings menu
to change the Automatic Liquid/Gel
Detergent Dosing setting according
to your habits, or according to the
recommendations by the detergent
manufacturer if you are using a different
liquid/gel detergent.
C
Please follow the instructions
given in section “Operating the
Product” to change the settings
of the Automatic Liquid/Gel
Detergent Dosing System and
Rinse Aid.
C
In addition to liquid/gel
detergents that function only
as a detergent, there are also
liquid/gel detergents that act as
rinse aid and/or soften water.
Follow the manufacturer’s
recommendations when using
these detergents.
Detergent manufacturer’s recommendations
about the amount of liquid/gel detergent to be
used are as follows:
For lightly soiled dishes 20 ml
For moderately soiled dishes 25 ml
For heavily soiled dishes 30 ml
C
Some gel-type detergents may
not be suitable for automatic
dosing as they are highly
viscous. Apply this type of
detergents onto the inner
surface of the dishwasher’s
door or directly into the
dishwasher, paying attention
to the recommendations of the
detergent manufacturer.
Detergent
You can use powder, tablet and liquid/gel
detergent in the machine.
A
Only use the detergents
produced particularly for
use with dishwashers in the
machine. We recommend you
not to use detergents that
contain chlorine and phosphate
as they are harmful for the
environment.
Your dishwasher is equipped with an
Automatic Liquid/Gel Detergent Dosing
System.
Thanks to this system, the amount of rinse
aid and liquid/gel detergent required for the
selected washing programme is adjusted
automatically.
C
Please read the information
given in section “Operating
the Product” to activate or
deactivate the Automatic
Liquid/Gel Detergent Dosing
adjustment.
C
When the Automatic Liquid/
Gel Detergent function is
enabled, the Automatic Liquid/
Gel Detergent indicator on
the panel will light up if there
is liquid/gel detergent in the
detergent box. If there is little or
no detergent in the detergent
box, the indicator will flash.
C
When the Automatic Liquid/
Gel Detergent indicator starts
to flash, there is enough
detergent for at least 5 washing
cycles.

16 Dishwasher / User’s Manual/50 EN
PreparatIon
C
The rinse aid used in
dishwashers is a special
product that is recommended
to increase drying efficiency
and prevent water or lime
stains on the washed items.
For this reason, care must be
paid to have rinse aid in the
rinse aid reservoir and to use
rinse aids produced specially for
dishwashers only.
Using the Automatic Liquid/Gel
Detergent Dosing System
In order to use the Automatic Liquid/
Gel Detergent Dosing function, select
Automatic Liquid/Gel Detergent Dosing
function on the control panel.
When the function is active, its indicator
comes lit and the system uses appropriate
amount of detergent and rinse aid in each
washing program.
C
Press the key again to cancel
the function.
C
When automatic liquid/gel
detergent dosing function
is selected, do not use other
types (powder, tablet, etc) of
detergents.
If you want to use another type of
detergent while the automatic liquid/gel
detergent dosing system is full, cancel
the automatic liquid/gel detergent dosing
function on the control panel. Then you can
use powder, tablet or liquid/gel detergent.
C
Use only liquid/gel detergent
suitable for the dishwasher.
A
Do not mix different brands of
liquid/gel detergents.
Addng Lqud/Gel
Detergent and Rnse Ad
The Automatic Liquid/Gel Detergent Dosing
system is found on the door of your
dishwasher.
1
2
After fully opening the door of the
dishwasher, open the decorative cover as
shown with arrows 1 and
A
B
C
D
2. Open the cover shown with (A) in the
picture and add rinse aid. Open the cover
shown with (B), add liquid/gel detergent
and close the covers.
C
The indicator marked with (C) on
your machine informs you about
the liquid/gel detergent level in
the box.
C
The indicator marked with (D)
on your machine informs you
about the rinse aid level in the
box.
C
Wipe clean any spilled rinse
aid outside the reservoir.
Otherwise, it will cause
foaming in the next washing
cycle, reducing the washing
performance of the product.

Dishwasher / User’s Manual 17/50 EN
PreparatIon
C
Do not fill the liquid/gel
detergent box with liquids or
chemical cleaners (vinegar,
bleacher etc.) other than liquid/
gel detergent.
C
Liquid/gel detergents that lost
their fluidity and became firm
must not be used in automatic
liquid/gel detergent dosing
system.
Liquid/gel detergents must be used in a
short time once they have been unpacked.
Unpacked liquid/gel detergents may lose
their fluidity in time.
C
When the detergent warning
lamp gives a warning, it will go
away in a short while after you
add liquid/gel detergent. If the
warning light is still on after a
washing cycle, you can remove
the detergent cartridge, shake
it a few times and reinstall it.
This may occur because of the
blockage of the warning gauge
due to the detergent residues
remained in the cartridges after
a long term use.
To avoid this, it is recommended
to clean the detergent cartridge
thoroughly once in two or three
months.
You can soak it in lukewarm
water, and you can can wash
with tap water.
This way, dosing problems
caused by accumulated
detergent residues, as well
as blockage of the warning
mechanism is prevented and
it is ensured that the system
works properly.
C
If a different brand or type
of liquid/gel detergent will
be used, make sure previous
detergent is depleted
completely and then remove
and clean the liquid/gel
detergent tank under tap water.
C
Fill the rinse air box only with
rinse aid, and the detergent box
only with liquid/gel detergent.
If you fill it inappropriately,
immediately remove the boxes,
empty them and clean under
running water.
Installing/Removing the Liquid/
Gel Detergent and Rinse Aid Box
Top remove the rinse aid and detergent
boxes, push and lift the system cover on
both sides as shown with arrows 1 and 2
and open.
1
21
Lift and remove the rinse aid box (A).
AB
1
2
Move the detergent box (B) in the direction
of the arrow (1) and lift to remove (2). Once
the cleaning or filling procedure is

18 Dishwasher / User’s Manual/50 EN
PreparatIon
complete, follow the above steps in reverse
order to re-install the detergent and rinse
aid boxes.
Powder Detergents
C
You can find the correct amount
of powder detergent for the
selected programme in the
table "Programme Data and
Consumption Values".
C
You can apply powder
detergent onto the cover of the
dishwasher or directly into the
machine.
C
To use powder detergents,
go to the Settings menu to
disable the Automatic Liquid/
Gel Detergent Dosing System
and if any, the Tablet Detergent
function.
C
Powder detergents must be
used with programmes without
Prewash. See Programme Data
and Consumption Values.
C
Use powder detergent in short
programmes without prewash
since the solubility of the tablet
detergent changes depending
on the temperature and time.
TIPS ON LIQUID/GEL DETERGENT
USAGE
After the program finished, if cups and
saucers have stains inside or the color of
them is changed, this may be due to the
one of the following reasons, or even a
combination of more ;
- Colored stains(eg: tea, coffee.) are left
in the cup or saucer for a considerable
time
- Using a short or low temperature wash
cycle
- Stale or damp detergent
- Poor quality detergent
- Hard water area without the use of
Rinse Aid
- Old or scratched crockery. (If you have
any kind of surface damage to cups,
you are far more likely to see stains.)
Washing algorithm of your dishwasher is
optimized to provide better cleaning. If you
face such kind of problems on your dishes
please;
1. Do not leave your dishes with colored
stains for a long time
2. Use longer programs like Eco or
Intensive.
3. Check quality and storing conditions of
your detergent
4. Check water hardness on your region
and make the necessary changes
needed.
5. Clean your detergent cartridge
periodically (every 3 month) to remove
solid or viscous residues inside. These
residues may cause insufficient
dosage.
6. Increase the detergent dosage amount
from the settings to improve the
cleaning performance. ‘’
Tablet detergents
Table detergents exhibit water softening
and / or rinse aid effect in addition to
detergent effect. Some types of these
detergents also contain special-purpose
washing chemicals such as glass and
stainless steel protectors.

Dishwasher / User’s Manual 19/50 EN
PreparatIon
C
Tablet detergents give
satisfying results only under
certain usage conditions. The
best washing performance in
dishwashers is obtained by
using detergent, rinse aid and
water softening salt individually.
A
C
Place the tablet detergent into
the Tablet Detergent Box found
on the upper basket of the
dishwasher (A).
C
When using tablet detergents,
you can use the Tablet
Detergent Function to improve
the drying performance of the
dishwasher (based on model).
Tablet detergent types commonly found on
the market:
2in1: Contains detergent, rinse aid or water
softening salt
3in1: Contains detergent, rinse aid and
water softening salt
4in1: Contains glass protectors in addition
to detergent, rinse aid and water softening
salt
5in1: Contains glass and stainless steel
protectors in addition to detergent, rinse
aid and water softening salt
C
When using tablet detergents,
follow the manufacturer's
instructions on the packaging.
C
Contact the detergent
manufacturer if your dishes
are wet and/or if you notice
limescale spots particularly on
your glasses after the washing
programme is over when using
a tablet detergent.
When you switch to powder
detergent from tablet detergent:
1. Make sure that salt and rinse aid
reservoirs are full.
2. Set the water hardness to the highest
level and perform an empty run.
3. After the empty washing cycle, review
the user manual and readjust the water
hardness level so as to suit the water
supply.
4. Make the appropriate rinse aid settings.
Items not suitable for washing in
the dishwasher
•Never wash dishes soiled by cigarette
ash, candle remnants, polish, dyestuff,
chemicals, etc. in your dishwasher.
•Do not wash silverware and cutlery
with wooden or bone stems, glued
pieces, or pieces that are not resistant
to heat, as well as copper and tin-
plated containers in the dishwasher.
C
Decorative prints of chinaware
as well as aluminum and silver
items may get discoloured or
tarnished after washing in the
dishwasher just as it happens
in handwashing as well. Some
delicate glass types and crystals
may become dull in time. We
strongly recommend you to
check if the tableware you are
going to purchase is suitable
for washing especially in the
dishwasher.

20 Dishwasher / User’s Manual/50 EN
PreparatIon
Placing the dishes into the
dishwasher
You can use your dishwasher in the
optimum way with respect to energy
consumption and washing and drying
performance only if you place the dishes in
an orderly way.
•Wipe away any coarse food remnants
(bones, seeds, etc.) on the dishes
before placing them in the dishwasher.
•Place thin, narrow pieces in the middle
sections of baskets if possible.
•Place the heavily soiled and bigger
items in the lower basket and smaller,
delicate and light items in the upper
basket.
•Place the hollowed dishes such as
bowls, glasses and pans upside down
in the dishwasher. Thus, accumulation
of water in deep hollows is prevented.
A
To prevent possible injuries,
always place the sharp and
pointed dishes such as service
fork, bread knife, etc. upside
down so as their pointed ends
will face down or they will lie
horizontally in the dish basket.
Unload dishes in the lower basket first and
then the dishes in the upper basket.