Beko ATH8130 User manual

Evaporation humidier
User Manual
ATH8130
EN RO DE SR FR IT NL

Please read this User Manual rst!
Dear Customer,
Thank you for purchasng the Beko product. We hope that you get the best results
from your product manufactured wth hgh qualty and state-of-the-art technology.
Therefore, please read ths entre User Manual and all the attached documents
carefully before usng the product and keep t as a reference for future use. If you
handover the product to someone else, gve the User Manual as well. Follow all
warnngs and nformaton n the User Manual.
Meanings of the symbols
The followng symbols are used n the sectons of ths manual:
This product is produced in environmentally friendly, modern facilities
Complies with the WEEE Regulations. Technical and design
modifications reserved.
C
Important nstructons or
useful tps about usage.
A
Warnng for hazardous
stuatons endangerng lfe
and property.
Warnng to actons that
must never be performed.
B
Warnng for electrc shock.
Warnng for hot surfaces.
Warnng for
danger of fre.

Evaporaton humdfer / User Manual 3 / 188 EN
1 Safety nstructons 4
2 Components 7
3 Functon nformaton 8
4 Product effcacy 11
5 Use method 12
5.1 Installaton notce of usng pure type humdfer for the frst tme . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
5.2 Dsassembly of humdfer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
5.3 Installaton of humdfer. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
6 Cleanng and mantenance 21
7 Techncal specfcatons 24
8 Crcut dagram 25
9 Troubleshootng 26
CONTENTS

4 / 188 EN Evaporaton humdfer / User Manual
Read the User Manual carefully before usng the product and keep t
n good custody for future reference.
• Don’t dsassemble, repar or alter the machne wthout
authorzaton. Otherwse, t may cause falure or danger.
Unauthorzed alteraton may result n fre or breakdown.
• The nput voltage must not exceed the ratng. Otherwse, t may
result n fre or damage the machne.
• Don’t damage the power cord or attach any object on t. Don’t
bend, drag or twst the power cord. Don’t stack heavy objects on
the power cord or drag t between objects. Damaged power cord
may result n electrc shock or fre.
• Before replacng the flter, addng water, cleanng or movng the
machne, turn off the power and pull out the plug. Otherwse,
operatons above may damage the machne or cause electrc
shock.
• Don’t use damaged power cord or deformed plugs. Use of unsafe
power cord may result n short crcut, electrc shock or fre.
• If the power cord s damaged, t must be replaced by manufacturer
or the specalst of ts mantenance department or smlar
department for safety reason.
• Don’t nstall the machne n a most place, e.g. bathroom. The vapor
may result n electrc shock or damage the machne.
• Don’t use the humdfer n a place wth heavy ol stan, e.g.
machne ol. Otherwse there may be rsks of machne breakdown,
electrc shock or combuston.
1 Safety nstructons

Evaporaton humdfer / User Manual 5 / 188 EN
• Don’t nstall the machne n outdoor or under drect sunlght.
Otherwse, the machne cabnet may dscolour.
• Don’t nstall the machne near any heat source, e.g. heater.
Otherwse, the machne cabnet may dscolour or deform.
• To maxmze the effect of purfcaton, t s recommended to place
the machne on the floor and at least 30cm away from the wall.
• Don’t attempt to use the machne for absorbng soot ejecton
or ventlaton n ktchen. Otherwse the servce lfe of the flter
screen may be shortened and the machne may be damaged.
• Don’t stck fngers or any other object nto the ar nlet and outlet.
Otherwse, t may cause electrc shock or damage.
• When usng pestcde, stop the machne frst to prevent any
chemcals from beng sucked n. as chemcals may otherwse
accumulate n the machne and generate hazardous pungent
substance under some crcumstances.
• Don’t let volatle substances or combustbles such as smoke or
ncense fume nto the nsde of the machne.
• Don’t block the ar nlet and outlet. Otherwse t may reduce the
machne’s cleanng capacty and result n machne breakdown.
• Don’t use benzene or dluents to wpe the machne or spray
pestcde to t. These chemcals may result n the crack of machne
cabnet and cause electrc shock or fre.
• If the machne s not n use for a long tme, pull the plug.
• To unplug the machne, hold the plug between your fngers and
take t out carefully. Don’t drag the cord forcefully. Otherwse, the
power cord may be damaged.
1 Safety nstructons

6 / 188 EN Evaporaton humdfer / User Manual
• Don’t st or stand on the machne or shake t. Otherwse, t may
cause falure.
• Keep chldren away from handlng the machne.
• Don’t use the machne at heavly smoky or dusty place, e.g. ktchen
or where flammable gas, caustc gas or metal dust may have
access. Otherwse, t may cause fre or falure.
• Don’t use solvents lke alcohol or dluents to clean the humdfer
and also keep t away from aerosol bomb. Otherwse, t wll cause
crack on the humdfer, even short crcut, thus results n electrc
shock or fre.
• Please pour the water out from tank and trough, otherwse when
the weather s cold, t wll possbly freeze the water. (Operatng
under cy condton may trgger malfuncton).
• If the machne s not used, please pour the water out from the
tank and trough completely, so as to avod the reproducton of
mold.
• Put the machne at least 2m away from the weak electromagnetc
wave sources, e.g. TV set, rado, sound equpment, quartz clock,
cable TV, cordless phone, cordless mcrophone, etc. Otherwse, t
may affect the vsual and sound performance of the above sad
equpments. However, under some crcumstances, even t s 2m
away, electromagnetc nterference may stll occur based on the
electromagnetc wavelength. Ths s partcularly clear when ndoor
antenna s used. Therefore, put t away from the equpment as far
as possble to prevent nose.
1 Safety nstructons

Evaporaton humdfer / User Manual 7 / 188 EN
1
2
3
4
5
6
7
8
9
10
11
1. Back cover plate
2. Water tank
3. Water trough
4. Water Wheel
5. Antbacteral box
6. Floater box
7. Vewport
8. Dsplay screen
9. Touch key
10. Actve carbon flter
11. Ar nlet plate
Packng lst
Complete humdfer machne 1
User Manual 1
2 Components

8 / 188 EN Evaporaton humdfer / User Manual
On/O Humidication mode Heat humidication Humidity Timer
1. On/Off
After connectng the machne to power, the buzzer makes harmonous rngs for four tmes wth the
whole LED screen flckerng once, and the machne s now n power-on state.
Press On/Off, the machne enters nto standard humdfcaton mode. The buzzer makes harmonous
rngs for four tmes, and the ndcator lght s on. Current humdty wll be shown on the LED screen.
The humdty default s 88-77-66-55-44-33-22-11..
The frst ten mnutes after startup s preheatng tme for humdty sensor.
If the machne s n heat humdfcaton or turbo status, motor wll delay by 1 mn to be standby.
2. Humdfcaton mode
There are 4 humdfcaton modes, .e. sleep humdfcaton mode, standard humdfcaton mode,
ntensve humdfcaton mode and smart humdfcaton mode. Please see the fgure for LED screen
dsplay.
The electrc motor and thermal fuse are connected to humdfcaton functon. (Motor: 220V/50Hz,
rated power 30W; Thermal fuse: rated power 250W)
Sleep humdfcaton mode : The motor operates at 700rpm. The dsplay screen only shows .
When the humdty s 5% over the set pont, the machne wll enter nto standby mode. When the
humdty s 5% below the set pont, t wll reenter nto sleep humdfcaton mode.
Standard humdfcaton mode : The motor operates at 1000rpm. When the humdty s 5% over
the set pont, the machne wll enter nto standby mode. When the humdty s 5% below the set pont,
t wll reenter nto standard humdfcaton mode.
Intensve humdfcaton mode : The motor operates at full power. The heatng power s 250W.
When the humdty s 5% over the set pont, heatng wll stop, and also the motor wll enter nto
standby mode after 1 mnute. When the humdty s 5% below the set pont, t wll reenter nto
ntensve humdfcaton mode.
3 Functon nformaton

Evaporaton humdfer / User Manual 9 / 188 EN
Smart humdfcaton mode : When the humdty level s below 45%, the machne wll enter nto
standard humdfcaton mode plus heat humdfcaton. When the humdty level s between 45% and
60%, the machne wll enter nto standard humdfcaton mode. When the humdty level s over 60%,
the machne wll enter nto sleep humdfcaton mode where the ndcator lght shows normally. When
the humdty level s over 70%, the machne wll enter nto standby mode.
C
Note: Humdty control and heat humdfcaton keys are not avalable n smart mode.
We recommend that you select sleep humdfcaton mode when sleepng. The machne has very low
nose n ths mode, thus t wll not affect your sleep qualty.
3. Heat humidificaiton
There are 2 workng states of heat humdfcaton: sleep humdfcaton mode + heat humdfcaton,
standard humdfcaton mode + heat humdfcaton.
Sleep humdfcaton mode + heat humdfcaton : The motor operates at 700rpm, heatng
power s 150W. The dsplay screen only shows + ndcator lght of heat humdfcaton . When
the humdty s 5% over the set pont, heatng wll stop, and also the motor wll enter standby mode
after 1 mnute; when the humdty s 5% below the set pont, t wll reenter heat humdfcaton mode.
Standard humdfcaton mode + heat humdfcaton : The motor operates at 1000rpm,
heatng power s 200W. When the humdty s 5% over the set pont, heatng wll stop, and also the
motor wll enter standby mode after 1 mnute; when the humdty s 5% below the set pont, t wll
reenter heat humdfcaton mode.
We recommend that you select sleep humdfcaton mode when sleepng. The machne has very low
nose n ths mode, thus t wll not affect your sleep qualty.
4. Humdty control
Press the humdty control key, the machne can be set to -- and 11 humdty levels ncludng 40%,
45%, 50%, 55%, 60%, 65%, 70%, 75%, 80%, 85%, 90%. When the machne detects the ambent
humdty s 5% hgher than the set pont, t wll automatcally stop workng. The dsplay screen shows
“set humdty” and “current humdty” at the same tme. When the ambent humdty s 5% lower than
the set pont, the machne wll automatcally start workng.
5. Tmer
Press “Tmer” to set tme. It has 13 reserved tmes to select from “0-12 hours”. Select the needed tme.
After the set tme flckers for 5 seconds, the current humdty wll show on the screen. The sum of
numbers on the top rght of the screen s the remanng tme.
3 Functon nformaton

10 / 188 EN Evaporaton humdfer / User Manual
The whole machne wll power off after tme s up. See the fgure for detals.
6. Water shortage ndcator
When water n the tank s nadequate, water shortage sgn shows and flckers on the screen.
After water s added n the tank, water shortage sgn wll be off, and the machne wll reenter nto the
selected workng mode.
7. LED Dsplay Auto-off
For energy save purpose, LED dsplay screen wll be automatcally off after no performance change on
top control panel wth 2 mnutes. And once there s a performance change managed on control panel,
LED dsplay wll resume back on.
3 Functon nformaton

Evaporaton humdfer / User Manual 11 / 188 EN
1. Cleaner humdfcaton wthout whtenng
Ar s washed and water s purfed, solvng the whtenng ssue thoroughly.
2. Healthy humdfcaton
It humdfes the ar through antbacteral wetted pad and natural evaporaton.
3. Odor elmnaton and ar purfcaton
Fne dust can be perfectly handled by water wheel washng. Over 98% of odor n the ar can be
elmnated va actve carbon net.
4. Use mxed humdfcaton to humdfy faster, more, and wder.
5. Double sterlzaton makes the ar cleaner.
Before water goes nto the tank, antbacteral ball wll sterlze once, and antbacteral plate wll
sterlze the polluted ar and water n the tank agan.
6. Humdty level can be adjusted.
It has 5 humdty levels to meet the humdfcaton needs n dfferent envronment.
7. Smart LED dsplay screen
It shows current humdty; you can have a vsual recognton of current ambent humdty.
4 Product effcacy

12 / 188 EN Evaporaton humdfer / User Manual
5.1 Installaton notce of usng pure type humdfer for the
frst tme
C
Note:
• Durng use and movement, when the machne nclnes more than 8°, water wll spll,
so please put the machne on a flat place durng workng. Please empty the water n
the tank and trough f the machne s to be moved or transported to a far place.
• Install the actve carbon net
Reach nto the buckle wth your hand and pull. See 1 n the fgure. Take off the packng bag outsde of
actve carbon net, and nstall t nto the ar nlet plate. See 2 n the fgure.
1
2
5 Use method

Evaporaton humdfer / User Manual 13 / 188 EN
• Install the ar nlet plate. See 1 n the fgure.
Insert snap of ar nlet plate nto back cover slot. See 3 n the fgure. Press the ar nlet plate. See 4 n
the fgure.
3
Snap
Slot
4
5 Usng method

14 / 188 EN Evaporaton humdfer / User Manual
• Install the water tank components
- Put your hand at the buckle and lft. The back cover plate wll be dsmounted. See 1 n the fgure.
1
- Hold the handle wth your hand, and take out the tank. See 2 n the fgure.
2
5 Usng method

Evaporaton humdfer / User Manual 15 / 188 EN
- Screw off the tank ld, and wash the tank wth clean water.
- Add water nto the tank. See 3 n the fgure.
- Screw on the tank ld clockwse. See 4 n the fgure.
4
• Grasp the tank and put t nto the back cover. See 5 n the fgure.
• Insert the front end of back cover plate nto the back cover, and press down. See 6 n the fgure.
5
6
5 Usng method

16 / 188 EN Evaporaton humdfer / User Manual
5.2 Dsassembly of humdfer
• Put your hand at buckle and lft. The back cover wll be dsmounted. See 1 n the fgure.
1
• Grasp the handle and take out the tank. See 2 n the fgure.
2
5 Usng method

Evaporaton humdfer / User Manual 17 / 188 EN
• Grasp the handle and pull out the trough. See 3 n the fgure.
3
• Dsmount the water wheel components.
Grasp the water wheel and lft, the water wheel components wll be taken out. See 4 n the fgure.
4
5 Usng method

18 / 188 EN Evaporaton humdfer / User Manual
• Dsmount the ar nlet plate and actve carbon net.
Reach nto the buckle wth your hand and pull. The ar nlet plate wll be pulled out. See 5 n the
fgure.
5
5.3 Installaton of humdfer
• Install the water wheel. Grab the wheel and put t nto the trough. See 1 n the fgure.
1
5 Usng method

Evaporaton humdfer / User Manual 19 / 188 EN
• Install the water trough. Grab the trough and push t nto the back cover slowly. See 2 n the fgure.
2
• Install the water tank components
- Screw off the tank ld, and add water nto the tank. See 3 n the fgure.
- Screw on the tank ld clockwse. See 4 n the fgure.
2
3
4
5 Usng method

20 / 188 EN Evaporaton humdfer / User Manual
- Grasp the tank and put t nto the back cover. See 5 n the fgure.
- Insert the front end of back cover plate nto the back cover, and press down. See 6 n the fgure.
5
6
5 Usng method