
EN / 19
2. *Quick Freezing Key
When the quick freezing key is pressed, the
LED on the key is illuminated and the quick
freezing function will be activated. Freezer
compartment temperature is set to -27
Celsius. Press the key again to cancel the
function. The quick freezing function will be
automatically cancelled. To freeze a large
amount of fresh food, press the quick
freezing key before placing the food in the
freezer compartment.
*Handle Light Function Setting Key
Handle light function might be switched
between open and closed modes by press-
ing the quick freezing key for 3 seconds. In
the closed mode, the handle light is only ac-
tivated when the appliance door is opened
and it goes out after a while after the door
is closed. In the open mode, the handle
light is activated when the appliance door
is opened, the handle light stays on dimly
after a while after the door is closed. The
handle light function is set to the ex-factory
closed mode.
3. Error Condition Indicator
This indicator will be active when your refri-
gerator cannot perform adequate cooling
or in case of any sensor error. “E” will be
displayed on the freezer compartment tem-
perature indicator and figures such as
1,2,3... will be displayed on the cooler com-
partment temperature indicator. These fig-
ures provide information to the authorized
service on the error that has occurred.
Exclamation mark may be displayed for a
while when you load warm food to the
freezer compartment or keep the door open
for a long period of time. This is not a fault,
this warning will be removed when the food
is cooled down or when any key is pressed.
4. Energy Saving (Display Off) Indicator
Energy saving function is enabled automat-
ically and the energy saving symbol lights
up when the door of the product is not
opened or closed for some period of time.
When the energy saving function is active,
all symbols on the screen except the en-
ergy saving symbol will be turned off. When
the energy saving function is active, if you
press any key or open the door, the energy
saving function will be deactivated and the
symbols on the screen will return to nor-
mal. The energy saving function is a func-
tion activated ex-factory and cannot be
cancelled.
5. The Freezer Compartment Temperat-
ure Setting Key
Temperature setting is made for freezer
compartment. Pressing this key will enable
the freezer compartment temperature to be
set at -15,-16,-18,-19,-20,-22,-24 Celsius.
6. *Compartment Conversion Key
When the compartment conversion key is
pressed for 3 seconds, freezer compart-
ment switches between cooler, off, and
freezer modes respectively. When it is oper-
ated as cooler compartment, the temperat-
ure of the compartment may be set at
8,7,6,5,4,3,2 and 1 Celcius. In the off mode,
compartment temperature indicator shall
display “- -”.
7. Cooler Compartment Temperature
Setting Key
Allows setting of temperature for cooler
compartment. When this key is pressed on,
the cooler compartment temperature is set
to 8,7,6,5,4,3,2 and 1 Celsius values
8.*Cooler Compartment Off (Vacation)
Function Key
Press the key for 3 seconds to activate the
vacation function. Vacation mode is activ-
ated and the LED on the key is illuminated.
“- -” will be displayed on the Cooler Com-
partment temperature indicator and the
cooler compartment does not actively per-
form cooling. You should not keep your
food in the cooler compartment if you activ-
ate this function. The other compartments
continue to cool according to temperatures
set before. Press the key for 3 seconds
again to cancel this function.
EN
FR
IT