Beko WMI 71242 User manual

2820523261_EN / 04-03-16.(16:39)
Document Number=
Washing Machine
User’s Manual
WMI 71242
EN CZ

This product was manufactured using the latest technology in environmentally friendly conditions.

3/ EN
Washing Machine / User’s Manual
1 Important instructions for safety and environment
This section contains safety instructions that will help protect from risk of
personal injury or property damage. Failure to follow these instructions shall void
any warranty.
1.1 General safety
• This product can be used by children at and above 8 years old and by persons
whose physical, sensory or mental capabilities were not fully developed or who
lack experience and knowledge provided that they are supervised or trained on
the safe usage of the product and the risks it brings out. Children must not play
with the product. Cleaning and maintenance works should not be performed by
children unless they are supervised by someone. Children of less than 3 years
should be kept away unless continuously supervised.
• Never place the product on a carpet-covered floor. Otherwise, lack of airflow
beneath the machine will cause electrical parts to overheat. This will cause pro-
blems with your product.
• If the product has a failure, it should not be operated unless it is repaired by the
Authorized Service Agent. There is the risk of electric shock!
• This product is designed to resume operating in the event of powering on after
a power interruption. If you wish to cancel the programme, see "Cancelling the
programme" section.
• Connect the product to a grounded outlet protected by a 16 A fuse. Do not ne-
glect to have the grounding installation made by a qualified electrician. Our com-
pany shall not be liable for any damages that will arise when the product is used
without grounding in accordance with the local regulations.
• The water supply and draining hoses must be securely fastened and remain un-
damaged. Otherwise, there is the risk of water leakage.
• Never open the loading door or remove the filter while there is still water in the
drum. Otherwise, risk of flooding and injury from hot water will occur.
• Do not force open the locked loading door. The loading door will be ready to open
just a few minutes after the washing cycle comes to an end. In case of forcing
the loading door to open, the door and the lock mechanism may get damaged.
• Unplug the product when not in use.
• Never wash the product by spreading or pouring water onto it! There is the risk of
electric shock!
• Never touch the plug with wet hands! Never unplug by pulling on the cable,
always pull out by grabbing the plug.
• Use detergents, softeners and supplements suitable for automatic washing ma-
chines only.
• Follow the instructions on the textile tags and on the detergent package.
• The product must be unplugged during installation, maintenance, cleaning and
repairing procedures.
• Always have the repairing procedures carried out by the Authorized Service
Agent. Manufacturer shall not be held liable for damages that may arise from
procedures carried out by unauthorized persons.

4/ EN
Washing Machine / User’s Manual
• If the power cable is damaged, it must be replaced by the manufacturer, after
sales service or a similarly qualified person (preferably an electrician) or someone
designated by the importer in order to avoid possible risks.
• Place the product on a rigid, flat and level surface.
• Do not place it on a long-pile rug or similar surfaces.
• Do not place the product on a high platform or near the edge on a cascaded sur-
face.
• Do not place the product on the power cable.
• Never use sponge or scrub materials. These will damage the painted, chrome
plated and plastic surfaces.
1.2 Intended use
• This product has been designed for domestic use. It is not suitable for commer-
cial use and it must not be used out of its intended use.
• The product must only be used for washing and rinsing of laundry that are mar-
ked accordingly.
• The manufacturer waives any responsibility arisen from incorrect usage or trans-
portation.
1.3 Children's safety
• Packaging materials are dangerous to children. Keep packaging materials in a
safe place away from reach of the children.
• Electrical products are dangerous for the children. Keep children away from the
product when it is in use. Do not let them to tamper with the product. Use child
lock to prevent children from intervening with the product.
• Do not forget to close the loading door when leaving the room where the product
is located.
• Store all detergents and additives in a safe place away from the reach of the
children by closing the cover of the detergent container or sealing the detergent
package.
While washing the laundry at high temperatures, the loading door
glass becomes hot. Therefore, keep especially the children away
from the loading door of the machine while the washing operation
is in progress.
1.4 Package information
• Packaging materials of the product are manufactured from recyclable materials
in accordance with our National Environment Regulations. Do not dispose of the
packaging materials together with the domestic or other wastes. Take them to the
packaging material collection points designated by the local authorities.
1.5 Disposing of the waste product
• This product has been manufactured with high quality parts and materials which
can be reused and are suitable for recycling. Therefore, do not dispose the pro-
duct with normal domestic waste at the end of its service life. Take it to a collec-
tion point for the recycling of electrical and electronic equipment. Please consult
your local authorities to learn the nearest collection point. Help protect the envi-

5/ EN
Washing Machine / User’s Manual
ronment and natural resources by recycling used products. For children's safety,
cut the power cable and break the locking mechanism of the loading door so that
it will be non-functional before disposing of the product.
1.6 Compliance with WEEE Directive
This product complies with EU WEEE Directive (2012/19/EU). This
product bears a classification symbol for waste electrical and electronic
equipment (WEEE).
This product has been manufactured with high quality parts and
materials which can be reused and are suitable for recycling. Do not
dispose of the waste product with normal domestic and other wastes
at the end of its service life. Take it to the collection center for the
recycling of electrical and electronic equipment. Please consult your
local authorities to learn about these collection centers.
Compliance with RoHS Directive:
The product you have purchased complies with EU RoHS Directive (2011/65/EU).
It does not contain harmful and prohibited materials specified in the Directive.
2 Installation
Refer to the nearest Authorised Service Agent for installation
of the product. To make the product ready for use, review
the information in the user manual and make sure that the
electricity, tap water supply and water drainage systems are
appropriate before calling the Authorized Service Agent. If
they are not, call a qualified technician and plumber to have
any necessary arrangements carried out.
CPreparation of the location and electrical, tap water and
waste water installations at the place of installation is
under customer's responsibility.
Make sure that the water inlet and discharge hoses
as well as the power cable are not folded, pinched or
crushed while pushing the product into its place after
installation or cleaning procedures.
Bwarning: Installation and electrical connections of
the product must be carried out by the Authorized
Service Agent. Manufacturer shall not be held liable for
damages that may arise from procedures carried out by
unauthorized persons.
Awarning: Prior to installation, visually check if the product
has any defects on it. If so, do not have it installed.
Damaged products cause risks for your safety.
2.1 Appropriate installation location
• Place the machine on a rigid floor. Do not place it on a
long pile rug or similar surfaces.
• Total weight of the washing machine and the dryer -with
full load- when they are placed on top of each other
reaches to approx. 180 kilograms. Place the product
on a solid and flat floor that has sufficient load carrying
capacity!
• Do not place the product on the power cable.
• Do not install the product at places where temperature
may fall below 0ºC.
• Place the product at least 1 cm away from the edges of
other furniture.
2.2 Removing packaging reinforcement
Tilt the machine backwards to remove the packaging
reinforcement. Remove the packaging reinforcement by
pulling the ribbon.
2.3 Removing the transportation locks
Awarning: Do not remove the transportation locks before
taking out the packaging reinforcement.
warning: Remove the transportation safety bolts before
operating the washing machine! Otherwise, the product
will be damaged.
1. Loosen all the bolts with a suitable spanner until they
rotate freely (C).
2. Remove transportation safety bolts by turning them
gently.
3. Attach the plastic covers supplied in the User Manual bag
into the holes on the rear panel. (P)

6/ EN
Washing Machine / User’s Manual
CKeep the transportation safety bolts in a safe place to
reuse when the washing machine needs to be moved
again in the future.
Never move the product without the transportation safety
bolts properly fixed in place!
2.4 Connecting water supply
CThe water supply pressure required to run the product is
between 1 to 10 bars (0.1 – 1 MPa). It is necessary to
have 10 – 80 liters of water flowing from the fully open
tap in one minute to have your machine run smoothly.
Attach a pressure reducing valve if water pressure is
higher.
If you are going to use the double water-inlet product
as a single (cold) water-inlet unit, you must install the
supplied stopper to the hot water valve before operating
the product. (Applies for the products supplied with a
blind stopper group.)
Awarning: Models with a single water inlet should not be
connected to the hot water tap. In such a case the laundry
will get damaged or the product will switch to protection
mode and will not operate.
warning: Do not use old or used water inlet hoses on the
new product. It may cause stains on your laundry.
1. Connect the special hoses supplied with the product to
the water inlets on the product. Red hose (left) (max. 90
ºC) is for hot water inlet, blue hose (right) (max. 25 ºC) is
for cold water inlet.
Awarning: Ensure that the cold and hot water connections
are made correctly when installing the product.
Otherwise, your laundry will come out hot at the end of
the washing process and wear out.
2. Tighten all hose nuts by hand. Never use a tool when
tightening the nuts.
3. Open the taps completely after making the hose
connection to check for water leaks at the connection
points. If any leaks occur, turn off the tap and remove the
nut. Retighten the nut carefully after checking the seal. To
prevent water leakages and damages caused by them,
keep the taps closed when the machine is not in use.
2.5 Connecting to the drain
• The end of the drain hose must be directly connected to
the wastewater drain or to the washbasin.
Awarning: Your house will be flooded if the hose comes
out of its housing during water discharge. Moreover, there
is risk of scalding due to high washing temperatures!
To prevent such situations and to ensure smooth water
intake and discharge of the machine, fix the end of the
discharge hose tightly so that it cannot come out.
• The hose should be attached to a height of at least 40
cm, and 100 cm at most.
• In case the hose is elevated after laying it on the floor
level or close to the ground (less than 40 cm above the
ground), water discharge becomes more difficult and the
laundry may come out excessively wet. Therefore, follow
the heights described in the figure.
100cm
40cm
• To prevent flowing of dirty water back into the machine
and to allow for easy discharge, do not immerse the hose
end into the dirty water or do not drive it in the drain more
than 15 cm. If it is too long, cut it short.
• The end of the hose should not be bent, it should not be
stepped on and the hose must not be pinched between
the drain and the machine.
• If the length of the hose is too short, use it by adding
an original extension hose. Length of the hose may
not be longer than 3.2 m. To avoid water leak failures,
the connection between the extension hose and the
drain hose of the product must be fitted well with an
appropriate clamp as not to come off and leak.
2.6 Adjusting the feet
Awarning: In order to ensure that the product operates
more silently and vibration-free, it must stand level and
balanced on its feet. Balance the machine by adjusting
the feet. Otherwise, the product may move from its place
and cause crushing and vibration problems.
1. Loosen the lock nuts on the feet by hand.
2. Adjust the feet until the product stands level and
balanced.
3. Tighten all lock nuts again by hand.
Awarning: Do not use any tools to loosen the lock nuts.
Otherwise, they will get damaged.

7/ EN
Washing Machine / User’s Manual
2.7 Electrical connection
Connect the product to a grounded outlet protected by a 16
A fuse. Our company shall not be liable for any damages
that will arise when the product is used without grounding in
accordance with the local regulations.
• Connection must comply with national regulations.
• Power cable plug must be within easy reach after
installation.
• If the current value of the fuse or breaker in the house is
less than 16 Amps, have a qualified electrician install a
16 Amp fuse.
• The voltage specified in the "Technical specifications"
section must be equal to your mains voltage.
• Do not make connections via extension cables or multi-
plugs.
Bwarning: Damaged power cables must be replaced by
the Authorized Service Agents.
Transportation of the product
1. Unplug the product before transporting it.
2. Remove water drain and water supply connections.
3. Drain all water that has remained in the product. (SEE
5.5)
4. Install transportation safety bolts in the reverse order of
removal procedure; (SEE 2.3)
CNever move the product without the transportation safety
bolts properly fixed in place!
Awarning:Packaging materials are dangerous to children.
Keep packaging materials in a safe place away from
reach of the children.
3 Preparation
3.1 Sorting the laundry
• Sort laundry according to type of fabric, colour, and
degree of soiling and allowable water temperature.
• Always obey the instructions given on the garment tags.
3.2 Preparing laundry for washing
• Laundry items with metal attachments such as,
underwired bras, belt buckles or metal buttons will
damage the machine. Remove the metal pieces or wash
the clothes by putting them in a laundry bag or pillow
case.
• Take out all substances in the pockets such as coins,
pens and paper clips, and turn pockets inside out and
brush. Such objects may damage the product or cause
noise problem.
• Put small size clothes such as infant's socks and nylon
stockings in a laundry bag or pillow case.
• Place curtains in without compressing them. Remove
curtain attachment items.
• Fasten zippers, sew loose buttons and mend rips and
tears.
• Wash “machine washable” or “hand washable” labeled
products only with an appropriate programme.
• Do not wash colours and whites together. New, dark
coloured cottons release a lot of dye. Wash them
separately.
• Tough stains must be treated properly before washing. If
unsure, check with a dry cleaner.
• Use only dyes/colour changers and limescale removers
suitable for machine wash. Always follow the instructions
on the package.
• Wash trousers and delicate laundry turned inside out.
• Keep laundry items made of Angora wool in the freezer
for a few hours before washing. This will reduce pilling.
• Laundry that are subjected to materials such as flour,
lime dust, milk powder, etc. intensely must be shaken off
before placing into the machine. Such dusts and powders
on the laundry may build up on the inner parts of the
machine in time and can cause damage.
3.3 Things to be done for energy saving
Following information will help you use the product in an
ecological and energy-efficient manner.
• Operate the product in the highest capacity allowed by
the programme you have selected, but do not overload;
see, "Programme and consumption table".
• Always follow the instructions on the detergent
packaging.
• Wash slightly soiled laundry at low temperatures.
• Use faster programmes for small quantities of lightly
soiled laundry.
• Do not use prewash and high temperatures for laundry
that is not heavily soiled or stained.
• If you plan to dry your laundry in a dryer, select the
highest spin speed recommended during washing
process.
• Do not use detergent in excess of the amount
recommended on the detergent package.
3.4 Initial use
Before starting to use the product, make sure that all
preparations are made in accordance with the instructions in
sections “Important safety instructions” and “Installation”.
To prepare the product for washing laundry, perform first
operation in Drum Cleaning programme. If your product
is not equipped with Drum Cleaning programme, perform
the Initial Use procedure in accordance with the methods
described under “5.2 Cleaning the loading door and the
drum” section of the user manual.
CUse an anti-limescale suitable for the washing machines.
CSome water might have remained in the product due to
the quality control processes in the production. It is not
harmful for the product.
3.5 Correct load capacity
The maximum load capacity depends on the type of laundry,
the degree of soiling and the washing programme desired.
The machine automatically adjusts the amount of water
according to the weight of the loaded laundry.

8/ EN
Washing Machine / User’s Manual
Awarning: Follow the information in the “Programme
and consumption table”. When overloaded, machine's
washing performance will drop. Moreover, noise and
vibration problems may occur.
Laundry type Weight (g)
Bathrobe 1200
Napkin 100
Duvet cover 700
Bed Sheet 500
Pillowcase 200
Tablecloth 250
Towel 200
Hand towel 100
Evening gown 200
Underclothing 100
Men’s overalls 600
Men’s shirt 200
Men’s pajamas 500
Blouses 100
3.6 Loading the laundry
1. Open the loading door.
2. Place laundry items loosely into the machine.
3. Push the loading door to close until you hear a locking
sound. Ensure that no items are caught in the door.
CThe loading door is locked while a programme is running.
The door can only be opened a while after the programme
comes to an end.
Awarning: In case of misplacing the laundry, noise and
vibration problems may occur in the machine.
3.7 Using detergent and softener
CWhen using detergent, softener, starch, fabric dye, bleach
or limescale remover read the manufacturer's instructions
on the package carefully and follow the suggested dosage
values. Use measuring cup if available.
Detergent Drawer
Detergent drawer of your washing machine consists of four
different compartments for powder main wash detergent,
liquid main wash detergent, liquid softener and powder
pre-wash detergent. Each of these laundry additives are
dispensed automatically in the relevant time during the
washing Programme.
Do not place the laundry additives directly into the drum.
Always use the detergent drawer.
Do not close the drawer too fast after putting the laundry
additives. This may cause the additives be dispensed early,
creating unsatisfactory washing results and fabric damage.
CDo not open the drawer during washing Programme.
The detergent drawer compartments are indicated
below:
1) Left compartment with number “II” (Main wash
compartment for powder detergent or powder bleach/
stain remover)
2) Left compartment with number “II ” (Main wash
compartment for liquid detergent or liquid stain remover)
3) Middle compartment with number “I” (pre-wash
compartment for powder detergent, powder stain remover
or liquid bleach - liquid bleach must be added either
during the pre-wash or during the first rinsing step of
the washing Programme). Liquid bleach must be added
manually while the machine takes in water.
4) Right compartment with “ ” symbol (liquid softener
compartment)
1
2
34
(II) Main Wash Compartment
Before starting the washing Programme, put powder
detergent into the left compartment with number “II”. Use
the detergent manufacturer’s measuring cup and follow the
instructions on the package. Powder bleach/stain remover
must also be put into this compartment.
Put the liquid detergent into the main wash compartment
with number “II ” before starting the washing Programme.
Liquid stain remover must be put into this compartment.
Put the suggested amount of liquid detergent into the
left compartment with “II ” symbol and dilute it to the
maximum filling level line (max. II ) with warm water.
Particularly the concentrated detergents must be diluted with
warm water; otherwise, the siphon may get clogged in time.
Do not fill the detergent above the maximum filling level
line; otherwise the excess amount of detergent will
reach the laundry without water and may cause stains
on the garments.In this case you will need to refill the
compartment. Do not pour the detergent onto the laundry
directly since this may cause stains on the garments.
Liquid Softener Compartment
Put the suggested amount of liquid softener into the right
compartment with “ ” symbol and dilute it to the maximum
filling level line (max. ) with warm water.
Particularly the concentrated softeners must be diluted with
warm water; otherwise, the siphon may get clogged in time.
Do not fill the softener above the maximum filling level
line; otherwise the excess amount of softener will get
mixed with the washing water and you will need to refill the
compartment. Do not pour the softener onto the laundry
directly since this may cause stains on the garments.
Liquid softener will be dispensed automatically at the final
rinsing step of the washing Programme.

9/ EN
Washing Machine / User’s Manual
(I) Pre-Wash Compartment
Put the powder pre-wash detergent or powder stain remover
into the middle compartment with number “I”.
You can also put liquid bleach into this compartment while
the machine takes in water during pre-wash or first rinsing
step. Adding the liquid bleach while the machine takes in
water allows it to be diluted before it is poured onto the
laundry.
You must select extra rinsing option if you use liquid bleach
in a washing Programme. Bleach must be removed from
the laundry with rinsing; otherwise it may cause itching on
the skin.
CRead the dosage instructions and label of your garments
carefully before using the liquid bleach.
Starch
• Add liquid starch, powder starch or the dyestuff into the
softener compartment as instructed on the package.
• Never use fabric softener and starch together in the same
washing cycle.
• Wipe the inside of the drum after using starch.
Bleaches
If you are going to use regular bleach in your machine, it
is suggested to select a Programme with pre-wash step
and add the bleach at the beginning of the pre-wash
without putting detergent into the pre-wash compartment.
Alternatively, it is suggested to select a Programme with
extra rinsing and add the bleach while the machine takes
in water from the detergent drawer in the first rinsing step.
Bleach should not be mixed with detergent. Since the bleach
may cause irritation on skin, little amounts must be used
and rinsed thoroughly. Do not pour bleach directly onto the
laundry and do not use it with colour laundry.
When using oxygen based bleach, follow the instructions on
the package and select a Programme at low temperature.
Oxygen based bleach can be used together with the
detergent. However, if it is not at the same thickness with
the detergent, then it must be added from the compartment
number “II” right after the detergent foams with water.
Eliminating lime formation
• When required, use only appropriate lime removers
developed specifically for washing machines and always
follow the instructions on the package.
3.8 Tips for efficient washing
Clothes
Light colours and whites Colours Dark colours Delicates/
Woolens/Silks
(Recommended temperature
range based on soiling level:
40-90ºC)
(Recommended temperature
range based on soiling level:
cold-40ºC)
(Recommended
temperature range
based on soiling level:
cold-40ºC)
(Recommended
temperature range
based on soiling level:
cold-30ºC)
Soiling Level
Heavily Soiled
(difficult stains such
as grass, coffee,
fruits and blood.)
It may be necessary to pre-
treat the stains or perform
prewash. Powder and liquid
detergents recommended
for whites can be used at
dosages recommended for
heavily soiled clothes. It is
recommended to use powder
detergents to clean clay and
soil stains and the stains that
are sensitive to bleaches.
Powder and liquid
detergents recommended
for colours can be used at
dosages recommended for
heavily soiled clothes. It is
recommended to use powder
detergents to clean clay and
soil stains and the stains that
are sensitive to bleaches. Use
detergents without bleach.
Liquid detergents
suitable for colours
and dark colours can
be used at dosages
recommended for
heavily soiled clothes.
Prefer liquid
detergents produced
for delicate clothes.
Woolen and silk
clothes must be
washed with special
woolen detergents.
Normally Soiled
(For example, stains
caused by body on
collars and cuffs)
Powder and liquid detergents
recommended for whites
can be used at dosages
recommended for normally
soiled clothes.
Powder and liquid detergents
recommended for colours
can be used at dosages
recommended for normally
soiled clothes. Use detergents
without bleach.
Liquid detergents
suitable for colours
and dark colours can
be used at dosages
recommended for
normally soiled clothes.
Prefer liquid
detergents produced
for delicate clothes.
Woolen and silk
clothes must be
washed with special
woolen detergents.
Lightly Soiled
(No visible stains
exist.)
Powder and liquid detergents
recommended for whites
can be used at dosages
recommended for lightly soiled
clothes.
Powder and liquid detergents
recommended for colours
can be used at dosages
recommended for lightly
soiled clothes. Use detergents
without bleach.
Liquid detergents
suitable for colours
and dark colours can
be used at dosages
recommended for lightly
soiled clothes.
Prefer liquid
detergents produced
for delicate clothes.
Woolen and silk
clothes must be
washed with special
woolen detergents.

10 / EN
Washing Machine / User’s Manual
4 Operating the product
4.1 Control panel
Dark wash
(Darkcare)
Dark wash
(Darkcare)
Cottons Pre-wash Main
wash
Rinse Wash Spin
Drain
(Pump)
Anti-
creasing Duvet
(Bedding)
Child-
proof lock
Hand
Wash
BabyProtect Cotton
Eco
Woollens
Delicate Pet hair
removal
Daily
Lingerie
expres 14
Super short
express
Daily
express
Rinse hold Start/
Pause
No spin Quick
wash
Finished Cold Self
Clean
Temperature
Super 40 Extra rinse
(Rinse Plus)
Freshen
up
Jeans Time delay Intensive Fasihon
care
Mixed 40
(Mix40)
Shirts Sport
mini 30
Eco Clean
Anti-
allergic
On/Off
Door Ready
PHR + Hygiene 20
BabyProtect +
Synthetics
Woollens
1 - Spin Speed Adjustment button
2 - Display
3 - Temperature Adjustment button
4 - Programme Selection knob
5 - On / Off button
6 - Delayed Start buttons (+ / -)
7 - Auxiliary Function buttons
8 - Start / Pause / Cancel button
1
6 7
2 3 4 5
8

11 / EN
Washing Machine / User’s Manual
4.2 Display symbols
F1 F2 F3 F4
a - Spin Speed indicator
b - Temperature indicator
c - Spin symbol
d - Temperature symbol
e - Remaining Time and Delayed Start indicator
f - Programme Indicator symbols (Prewash / Main Wash /
Rinse / Softener / Spin)
g - Economy symbol
h - Delayed Start symbol
i - Door Locked symbol
j - Start symbol
k - Pause symbol
l - Auxiliary Function symbols
m - No Water symbol
4.3 Preparing the machine
Make sure that the hoses are connected tightly. Plug in your
machine. Turn the tap on completely. Place the laundry in the
machine. Add detergent and fabric softener.
4.4 Programme selection
Select the programme suitable for the type, quantity
and soiling degree of the laundry in accordance with the
"Programme and consumption table" and the temperature
table below.
90˚C Heavily soiled white cottons and linens. (coffee table
covers, tableclothes, towels, bed sheets, etc.)
60˚C Normally soiled, coloured, fade proof linens, cottons or synthetic clothes (shirt, nightgown, pajamas, etc.) and
lightly soiled white linens (underwear, etc.)
40˚C-
30˚C- Cold Blended laundry including delicate textile (veil curtains, etc.), synthetics and woolens.
Select the desired programme with the Programme
Selection button.
CProgrammes are limited with the highest spin speed
appropriate for that particular type of fabric.
CWhen selecting a programme, always consider the type
of fabric, colour, degree of soiling and permissible water
temperature.
CAlways select the lowest required temperature. Higher
temperature means higher power consumption.
CFor further programme details, see "Programme and
consumption table"
4.5 Main programmes
Depending on the type of fabric, use the following main
programmes.
• Cottons
Use this programme for your cotton laundry (such as bed
sheets, duvet and pillowcase sets, towels, bathrobes,
underwear, etc.). Your laundry will be washed with vigorous
washing action for a longer washing cycle.
• Synthetics
Use this programme to wash your synthetic clothes (shirts,
blouses, synthetic/cotton blends, etc.). It washes with a
gentle action and has a shorter washing cycle compared to
the Cottons programme.
For curtains and tulle, use the Synthetic 40˚C programme
with prewash and anti-creasing functions selected. As their
meshed texture causes excessive foaming, wash the veils/
tulle by putting little amount of detergent into the main
wash compartment. Do not put detergent in the prewash
compartment.
• Woollens
Use this programme to wash your woolen clothes. Select
the appropriate temperature complying with the tags of your
clothes. Use appropriate detergents for woolens.
4.6 Additional programmes
For special cases, additional programmes are available in
the machine.
CAdditional programmes may differ according to the
model of the machine.
• Cotton Economic
You may wash your normally soiled durable cotton and
linen laundry in this programme with the highest energy
and water saving compared to all other wash programmes
suitable for cottons. Actual water temperature may differ
from the declared cycle temperature. Programme duration
may automatically be shortened during later stages of the
programme if you wash less amount (e.g. ½ capacity or
less) of laundry. In this case energy and water consumption
will be further decreased giving you the opportunity for a
more economical wash. This feature is available for certain
models having remaining time display.
• BabyProtect
Use this programme to wash baby laundry, and the laundry
that belongs to allergic persons. Longer heating time and an
additional rinsing step provide a higher level of hygiene.
• Hand wash
Use this programme to wash your woolen/delicate clothes
that bear “not machine- washable” tags and for which hand
wash is recommended. It washes laundry with a very gentle
washing action to not to damage clothes.
• Daily express
Use this programme to wash your lightly soiled cotton
clothes in a short time.
• Super short express
Use this programme to wash your little amount of lightly
soiled cotton clothes in a short time.

12 / EN
Washing Machine / User’s Manual
• Darkcare
Use this programme to wash your dark coloured laundry
or the laundry that you do not want it get faded. Washing
is performed with little mechanic action and at low
temperatures. It is recommended to use liquid detergent or
woolen shampoo for dark coloured laundry.
• Mixed 40 (Mix 40)
Use this programme to wash your cotton and synthetic
clothes together without sorting them.
• Shirts
Use this programme to wash the shirts made of cotton,
synthetic and synthetic blended fabrics together.
• Freshen Up
Use this programme to remove the odour on the laundry that
are worn only for once and do not contain any stains or dirt.
• Eco Clean
Use this programme, which is much more sensitive to
environment and natural resources, to wash your lightly
soiled and unstained cotton laundry (max. 3.5 kg) in a short
time and economically.
CIt is recommended to use liquid detergent or gel
washing detergent.
• Self Clean
Use this programme regularly (once in every 1-2 months) to
clean the drum and provide the required hygiene. Run the
programme without any laundry in the machine. To obtain
better results, put powder limescale remover for washing
machines into the detergent compartment II. When the
programme is over, leave the loading door ajar so that the
inside of the machine gets dry.
CThis is not a washing programme. It is a maintenance
programme.
CDo not run the programme when there is something in
the machine. If you try to do so, the machine detects
that there is a load inside and aborts the programme.
4.7 Special programmes
For specific applications, select any of the following
programmes.
• Rinse
Use this programme when you want to rinse or starch
separately.
• Spin + Drain
Use this programme to apply an additional spin cycle for
your laundry or to drain the water in the machine.
Before selecting this programme, select the desired spin
speed and press Start / Pause / Cancel button. The machine
will spin the laundry with the set spin speed and drain the
water coming out of them.
If you wish to drain only the water without spinning your
laundry, select the Pump+Spin programme and then select
the No Spin function with the help of Spin Speed Adjustment
button. Press Start / Pause / Cancel button.
CUse a lower spin speed for delicate laundries.
4.8 Temperature selection
Whenever a new programme is selected, the maximum
temperature for the selected programme appears on the
temperature indicator.
To decrease the temperature, press the Temperature
Adjustment button. Temperature decreases with increments
of 10° and finally, “-” symbol indicating the cold wash option
appears on the display.
CIf you scroll to cold wash option and press Temperature
Adjustment button again, the recommended
temperature for the selected programme appears on
the display. Press the Temperature Adjustment button
again to decrease the temperature.
Economy symbol
Indicates the programmes and temperatures that provide
energy savings.
CEconomy symbol can not be selected in Intensive and
Hygiene programmes since washing is performed in
long times and at high temperatures in order to provide
hygiene. Similarly, Economy symbol can not be selected
in Baby, Refresh, Drum Cleaning, Spin and Rinse
programmes as well.
4.9 Spin speed selection
Whenever a new programme is selected, the recommended
spin speed of the selected programme is displayed on the
spin speed indicator.
To decrease the spin speed, press the Spin Speed
Adjustment button. Spin speed decreases gradually. Then,
depending on the model of the product, "Rinse Hold" and
"No Spin" options appear on the display. See "Auxiliary
function selection" section for explanations of these options.
CRinse Hold option is indicated with “ ” symbol and
No Spin option is indicated with “ ” symbol.

13 / EN
Washing Machine / User’s Manual
4.10 Programme and consumption table
• : Selectable
* : Automatically selected, no cancelling.
** : Energy Label programme (EN 60456 Ed.3)
*** If maximum spin speed of the machine is lower then this value, you can only select up to the maximum spin speed.
- : See the programme description for maximum load.
** “Cotton eco 40°C and Cotton eco 60°C are standard cycles.” These cycles are known as ‘40°C cotton standard cycle’ and
‘60°C cotton standard cycle’ and indicated with the symbols on the panel.
CThe auxiliary functions in the table may vary according to the model of your machine.
CWater and power consumption may vary subject to the changes in water pressure, water hardness and temperature, ambient
temperature, type and amount of laundry, selection of auxiliary functions and spin speed, and changes in electric voltage.
CYou can see the washing time of the programme you have selected on the display of the machine. It is normal that small
differences may occur between the time shown on the display and the real washing time.
EN 2Auxiliary functions
Programme (°C)
Max. Load (kg) Water Consumption (l) Energy Consumption (kWh) Max. Speed*** Prewash Quick Wash Rinse Plus Anti-Creasing Rinse Hold
Selectable
temperature
range °C
Cottons 90 7 74 2.30 1600 • • • • • 90-Cold
Cottons 60 7 72 1.50 1600 • • • • • 90-Cold
Cottons 40 7 72 0.85 1600 • • • • • 90-Cold
BabyProtect 90 7 66 2.70 1600 * • 90-30
Cotton Economic 60** 7 44 1.00 1600 • 60-Cold
Cotton Economic 60** 3.5 38 0.84 1600 • 60-Cold
Cotton Economic 40** 3.5 38 0.65 1600 • 60-Cold
Cotton Economic 40 7 64 0.72 1600 • 60-Cold
Synthetics 60 3 45 1.00 1200 • • • • • 60-Cold
Synthetics 40 3 45 0.45 1200 • • • • • 60-Cold
Eco Clean 20 3.5 39 0.16 1600 • 20
Mixed 40 (Mix 40) 40 3.5 45 0.55 1200 • • • • • 40-Cold
Shirts 40 3.5 45 0.55 800 • • • * • 60-Cold
Super short express 30 2 35 0.10 1400 • • 30-Cold
Daily express 90 7 60 2.00 1400 • • 90-Cold
Daily express 60 7 60 1.15 1400 • • 90-Cold
Daily express 30 7 70 0.20 1400 • • 90-Cold
Woollens 40 1.5 56 0.30 1200 • • 40-Cold
Hand wash 30 1 40 0.25 1200 30-Cold
Darkcare 40 3 82 0.55 1200 * • 40-Cold
Self Clean 70 - 100 1.70 800 * 70
Freshen Up - 2 20 0.03 1200 • -

14 / EN
Washing Machine / User’s Manual
4.11 Auxiliary function selection
Select the desired auxiliary functions before starting
the programme. Furthermore, you may also select or
cancel auxiliary functions that are suitable to the running
programme by pressing the Start / Pause / Cancel button
when the machine is operating. For this, the machine must
be in a step before the auxiliary function you are going to
select or cancel.
Depending on the programme, press a, b, c or d buttons to
select the desired auxiliary function. Symbol of the selected
auxiliary function appears on the display.
CSome functions cannot be selected together. If a second
auxiliary function conflicting with the first one is selected
before starting the machine, the function selected
first will be canceled and the second auxiliary function
selection will remain active. For example, if you want to
select Quick Wash after you have selected the Prewash,
Prewash will be canceled and Quick Wash will remain
active.
CAn auxiliary function that is not compatible with the
programme cannot be selected. (See “Programme and
consumption table”)
CAuxiliary Function buttons may vary according to the
model of the machine.
• Prewash
A Prewash is only worthwhile for heavily soiled laundry. Not
using the Prewash will save energy, water, detergent and
time.
F1 appears on the display when you select this function (a).
• Quick Wash
This function can be used in Cottons and Synthetics
programmes. It decreases the washing times and also the
number of rinsing steps for lightly soiled laundry.
F2 appears on the display when you select this function (b).
CWhen you select this function, load your machine
with half of the maximum laundry specified in the
programme table.
• Rinse Plus
This function enables the machine to make another rinsing
in addition to the one already made after the main wash.
Thus, the risk for sensitive skins (babies, allergic skins, etc.)
to be effected by the minimal detergent remnants on the
laundry can be reduced.
F3 appears on the display when you select this function (c).
• Anti-Creasing
This function creases the clothes lesser when they are being
washed. Drum movement is reduced and spinning speed is
limited to prevent creasing. In addition, washing is done with
a higher water level.
F4 appears on the display when you select this function (d).
• Rinse Hold
If you are not going to unload your clothes immediately after
the programme completes, you may use rinse hold function
to keep your laundry in the final rinsing water in order to
prevent them from getting wrinkled when there is no water
in the machine. Press Start / Pause /Cancel button after this
process if you want to drain the water without spinning your
laundry. Programme will resume and complete after draining
the water.
If you want to spin the laundry held in water, adjust the Spin
Speed and press Start / Pause / Cancel button.
The programme resumes. Water is drained, laundry is spun
and the programme is completed.
• Pet hair removal
This function helps to remove pet hair that remain on your
garments more effectively.
When you select this function, Prewash and Extra Rinse
steps are added to the normal programme. Thus, washing
is performed with more water (30%) and the pet hair is
removed more effectively.
ANever wash your pets in the washing machine.
4.12 Time display
Remaining time to complete the programme appears on the
display while the programme is running. Tim is displayed as
“01:30” in hours and minutes format.
CProgramme time may differ from the values in the
“Programme and consumption table” depending on
the water pressure, water hardness and temperature,
ambient temperature, amount and the type of laundry,
auxiliary functions selected and the changes at the
mains voltage.
Delayed start
With the Delayed Start function the startup of the
programme may be delayed up to 24 hours. Delayed start
time can be increased by increments of 30 minutes.
CDo not use liquid detergents when you set Delayed
Start! There is the risk of staining of the clothes.
Open the loading door, place the laundry and put detergent,
etc. Select the washing programme, temperature, spin
speed and, if required, the auxiliary functions. Set the
desired delayed start time by pressing the Delayed Start + or
- buttons. Delayed Start symbol flashes. Press Start / Pause
/ Cancel button. Delayed start countdown starts. Delayed
Start symbol illuminates steadily. Start symbol appears. “:”
sign in the middle of the delayed start time on the display
starts flashing.
CAdditional laundry may be loaded during the delayed
start period. At the end of the countdown, Delayed Start
symbol disappears, washing cycle starts and the time
of the selected programme appears on the display.
Changing the delayed start period
If you want to change the time during countdown:
Press Start / Pause / Cancel button. “:” sign in the middle of
the delayed start time on the display stops flashing. Pause
symbol appears. Delayed Start symbol flashes. Start symbol
disappears. Set the desired delayed start time by pressing
the Delayed Start + or - buttons. Press Start / Pause /
Cancel button. Delayed Start symbol illuminates steadily.
Pause symbol disappears. Start symbol appears. “:” sign
in the middle of the delayed start time on the display starts
flashing.
Cancelling the Delayed Start function
If you want to cancel the delayed start countdown and start
the programme immediately:
Press Start / Pause / Cancel button. “:” sign in the middle
of the delayed start time on the display stops flashing. Start
symbol disappears. Pause symbol and Delayed Start symbol

15 / EN
Washing Machine / User’s Manual
flashes. Decrease the delayed start time by pressing the
Delayed Start - button. Programme duration appears after
30 minutes. Press Start / Pause / Cancel button to start the
programme.
4.13 Starting the programme
Press Start / Pause / Cancel button to start the programme.
Start symbol showing the startup of the programme will turn
on. Loading door is locked and Door Locked symbol appears
on the display. The symbol of the step from which the
programme has started appears on the display (Prewash,
Main Wash, Rinse, Softener and Spin).
4.14 Progress of programme
Progress of a running programme is indicated on the display
with a set of symbols.
Relevant symbol appears on the display at the beginning of
each programme step and all symbols remain lit at the end
of the programme. The farthermost right symbol indicates
the current programme step.
Prewash
If the Prewash auxiliary function is selected, Prewash symbol
appears on the display indicating that the prewash step has
started.
Main Wash
Main Wash symbol indicating that the main wash step has
started appears on the display.
Rinse
Rinse symbol indicating that the rinsing step has started
appears on the display.
Softener
Softener symbol indicating that the softener step has started
appears on the display.
Spin
Appears at the beginning of the final spin step and remains
lit during Spin and Pump special programmes.
CIf the machine does not pass to the spinning step,
Rinse Hold function might be active or the automatic
unbalanced load detection system might be activated
due to the unbalanced distribution of the laundry in the
machine.
4.15 Loading door lock
There is a locking system on the loading door of the
machine that prevents opening of the door in cases when
the water level is unsuitable.
Door Locked symbol appears when the loading door is
locked. This symbol will flash until the loading door becomes
ready to open when programme completes or the machine
is paused. Do not force to open the loading door in this step.
Symbol disappears when the door is ready to open. You can
open the door when the symbol disappears.
4.16 Changing the selections after
programme has started
Switching the machine to pause mode
Press the Start / Pause / Cancel button to switch the
machine to pause mode. Pause symbol appears on the
display indicating that the machine is paused. Start symbol
disappears.
Changing the speed and temperature settings for
auxiliary functions
Depending on the step the programme has reached, you
may cancel or activate the auxiliary functions; see, "Auxiliary
function selection".
You may also change the speed and temperature settings;
see, "Spin speed selection" and "Temperature selection".
Adding or taking out laundry
Press the Start / Pause / Cancel button to switch the
machine to pause mode. The programme follow-up light of
the relevant step during which the machine was switched
into the pause mode will flash. Wait until the Loading Door
can be opened. Open the Loading Door and add or take
out the laundry. Close the Loading Door. Make changes
in auxiliary functions, temperature and speed settings if
necessary. Press Start / Pause / Cancel button to start the
machine.
CThe loading door will not open if the water temperature
in the machine is high or the water level is above the
door opening.
4.17 Child Lock
Use Child Lock function to prevent children from tampering
with the machine. Thus you can avoid any changes in a
running programme.
CYou can switch on and off the machine with On / Off
button when the Child Lock is active. When you switch
on the machine again, programme will resume from
where it has stopped.
To activate the Child Lock:
Press and hold 2nd and 4th Auxiliary Function buttons for 3
seconds. “Con” appears on the display.
CSame phrase will appear on the display if you press
any button when Child Lock is enabled.
To deactivate the Child Lock:
Press and hold 2nd and 4th Auxiliary Function buttons for 3
seconds. “COFF” appears on the display.
CDo not forget to disable the child lock at the end of
the programme if it was enabled before. Otherwise,
machine will not allow to select a new programme.
4.18 Cancelling the programme
Press and hold Start / Pause / Cancel button for 3 seconds.
Start symbol flashes. Symbol of the step at which the
programme was cancelled remains lit. "End" appears on the
display and the programme is cancelled.
CIf you want to open the loading door after you have
cancelled the programme but it is not possible to open
the loading door since the water level in the machine
is above the loading door opening, then turn the
Programme Selection knob to Pump+Spin programme
and discharge the water in the machine.
4.19 Machine is in Rinse Hold mode
Spin symbol flashes and Pause symbol illuminates when the
machine is in Rinse Hold mode.
If you want to spin your laundry when the machine is in this
mode:
Adjust the spin speed and press Start / Pause / Cancel
button. Pause symbol disappears and Start symbol appears.
Programme resumes, discharges the water and spins the
laundry.
If you only want to drain the water without spinning:

16 / EN
Washing Machine / User’s Manual
Just press Start / Pause / Cancel button. Pause symbol
disappears. Start symbol appears. Programme resumes and
discharges the water only.
4.20 End of programme
“End” appears on the display at the end of the programme.
Symbols of the programme steps remain lit. Auxiliary
function, spin speed and temperature that were selected at
the beginning of the programme remain selected.
4.21 Your machine is equipped
with a “Standby Mode”
In case of not starting any programme or waiting without
making any other operation when the machine is turned
on by On/Off button and while it is in selection step or if
no other operation is performed approximately 2 minutes
after the programme you selected has come to an end,
your machine will automatically switch to energy saving
mode. Brightness of indicator lights will decrease. Also,
if your product is equipped with a display showing the
programme duration, this display will completely turn off. In
case of rotating the Programme Selection knob or pressing
any button, lights and display will restore to their previous
condition. Your selections made while exiting the energy
saving mode may change. Check the appropriateness of
your selections before starting the programme. Readjust if
necessary. This is not a fault.
5 Maintenance and cleaning
Service life of the product extends and frequently faced
problems decrease if cleaned at regular intervals.
5.1 Cleaning the detergent drawer
Remove any powder residue buildup in the drawer. To do
this;
1
2
34
You can remove the detergent drawer by pulling it towards
yourself strongly.
CIf more than a normal amount of softener and liquid
detergent mixture starts to remain in the softener
compartment, the siphon must be cleaned.
Wash the drawer and the siphon with plenty of lukewarm
water in a washbasin. Wear protective gloves or use an
appropriate brush to avoid touching the residues in the
drawer when cleaning. Replace the drawer into its housing
after cleaning. Check if the siphon is in its original location.
5.2 Cleaning the loading door and the drum
For products with drum cleaning programme, please see
Operating the product - Programmes.
For products without drum cleaning, follow the below steps
to clean the drum:
Select Additional Water or Extra Rinse auxiliary functions.
Use a Cottons programme without pre-wash. Set the
temperature to the level recommended on the drum
cleaning agent which can be provided from authorized
services. Apply this procedure without any laundry in
the product. Before starting the programme, put 1 pouch
of special drum cleaning agent (if the special agent could
not be supplied, put max. 100 g of powder detergent /
anti-limescale) into the main wash detergent compartment
(compartment no. “2”). If the detergent / anti-limescale
is in tablet form, put only one tablet into the main wash
compartment no. “2”. Dry the inside of the bellow with a
clean piece of cloth after the programme has come to an
end.
CRepeat Drum Cleaning process in every 2 months.
CUse an detergent / anti-limescale suitable for the washing
machines.

17 / EN
Washing Machine / User’s Manual
After every washing make sure that no foreign substance is
left in the drum.
If the holes on the bellow shown in the figure is blocked,
open the holes using a toothpick.
CForeign metal substances will cause rust stains in the
drum. Clean the stains on the drum surface by using
cleaning agents for stainless steel. Never use steel wool
or wire wool.
Awarning: Never use sponge or scrub materials. These will
damage the painted and plastic surfaces.
5.3 Cleaning the body and control panel
Wipe the body of the machine with soapy water or non-
corrosive mild gel detergents as necessary, and dry with a
soft cloth.
Use only a soft and damp cloth to clean the control panel.
5.4 Cleaning the water intake filters
There is a filter at the end of each water intake valve at the
rear of the machine and also at the end of each water intake
hose where they are connected to the tap. These filters
prevent foreign substances and dirt in the water to enter the
washing machine. Filters should be cleaned as they do get
dirty.
1. Close the taps.
2. Remove the nuts of the water intake hoses to access
the filters on the water intake valves. Clean them with an
appropriate brush. If the filters are too dirty, take them out
by means of pliers and clean them.
3. Take out the filters on the flat ends of the water intake
hoses together with the gaskets and clean thoroughly
under running water.
4. Replace the gaskets and filters carefully in their places
and tighten the hose nuts by hand.
5.5 Draining remaining water and
cleaning the pump filter
The filter system in your machine prevents solid items
such as buttons, coins and fabric fibers clogging the pump
impeller during discharge of washing water. Thus, the water
will be discharged without any problem and the service life
of the pump will extend.
If the machine fails to drain water, the pump filter is clogged.
Filter must be cleaned whenever it is clogged or in every 3
months. Water must be drained off first to clean the pump
filter.
In addition, prior to transporting the machine (e.g., when
moving to another house) and in case of freezing of the
water, water may have to be drained completely.
Awarning: Foreign substances left in the pump filter may
damage your machine or may cause noise problem.
In order to clean the dirty filter and discharge the water:
1. Unplug the machine to cut off the supply power.
Awarning: Temperature of the water inside the machine
may rise up to 90 ºC. To avoid burning risk, filter must be
cleaned after the water in the machine cools down.
2. Some of our products have emergency draining hose and
some does not have. Follow the steps below to discharge
the water.
Discharging the water when the product does not have an
emergency draining hose:
a. Place a large container in front of the filter to catch water
from the filter.
b. Loosen pump filter (anticlockwise) until water starts to
flow. Fill the flowing water into the container you have
placed in front of the filter. Always keep a piece of cloth
handy to absorb any spilled water.
c. When the water inside the machine is finished, take out
the filter completely by turning it.
3. Clean any residues inside the filter as well as fibers, if
any, around the pump impeller region.
4. Install the filter.

18 / EN
Washing Machine / User’s Manual
6 Technical specifications
Complying Commission Delegated Regulation (EU) No 1061/2010
Supplier name or trademark Beko
Model name WMI 71242
Rated capacity (kg) 7
Energy efficiency class / Scale from A+++ (Highest Efficiency) to D (Lowest Efficiency) A++
Annual Energy Consumption (kWh) (1) 194
Energy consumption of the standard 60°C cotton programme at full load (kWh) 1.001
Energy consumption of the standard 60°C cotton programme at partial load (kWh) 0.838
Energy consumption of the standard 40°C cotton programme at partial load (kWh) 0.652
Power consumption in ‘off-mode’ (W) 0.200
Power consumption in ‘left-on mode’ (W) 1.000
Annual Water Consumption (l) (2) 9020
Spin-drying efficiency class / Scale from A (Highest Efficiency) to G (Lowest Efficiency) B
Maximum spin speed (rpm) 1200
Remaining moisture Content (%) 53
Standard cotton programme (3) Cotton Eco 60°C and 40°C
Programme time of the standard 60°C cotton programme at full load (min) 160
Programme time of the standard 60°C cotton programme at partial load (min) 145
Programme time of the standard 40°C cotton programme at partial load (min) 130
Duration of the left-on mode (min) N/A
Airborne acoustical noise emissions washing/spinning (dB) 51/65
Built-in Yes
Height (cm) 82
Width (cm) 60
Depth (cm) 54
Net weight (±4 kg.) 72
Single Water inlet / Double Water inlet • / -
• Available
Electrical input (V/Hz) 230 V / 50Hz
Total current (A) 10
Total power (W) 2200
Main model code 8811
(1) Energy Consumption based on 220 standard washing cycles for cotton programmes at 60°C and 40°C at full and partial load, and the
consumption of the low-power modes. Actual energy consumption will depend on how the appliance is used.
(2) Water consumption based on 220 standard washing cycles for cotton programmes at 60°C and 40°C at full and partial load. Actual water
consumption will depend on how the appliance is used.
(3) “Standard 60°C cotton programme” and the “standard 40°C cotton programme” are the standard washing programmes to which the information
in the label and the fiche relates and these programmes are suitable to clean normally soiled cotton laundry and that they are the most efficient
programmes in terms of combined energy and water consumption.
Technical specifications may be changed without prior notice to improve the quality of the product.

19 / EN
Washing Machine / User’s Manual
7 Troubleshooting
Program does not start after closing the door.
• Start / Pause / Cancel button was not pressed. >>> *Press the Start / Pause / Cancel button.
Programme cannot be started or selected.
• Washing machine has switched to self protection mode due to a supply problem (line voltage, water pressure, etc.). >>> Press and hold
Start / Pause button for 3 seconds to reset the machine to factory settings. (See "Cancelling the programme")
Water in the machine.
• Some water might have remained in the product due to the quality control processes in the production. >>> This is not a failure; water is
not harmful to the machine.
Machine vibrates or makes noise.
• Machine might be standing unbalanced. >>> Adjust the feet to level the machine.
• A hard substance might have entered into the pump filter. >>> Clean the pump filter.
• Transportation safety bolts are not removed. >>> Remove the transportation safety bolts.
• Laundry quantity in the machine might be too little. >>> Add more laundry to the machine.
• Machine might be overloaded with laundry. >>> Take out some of the laundry from the machine or distribute the load by hand to
balance it homogenously in the machine.
• Machine might be leaning on a rigid item. >>> Make sure that the machine is not leaning on anything.
Machine stopped shortly after the programme started.
• Machine might have stopped temporarily due to low voltage. >>> It will resume running when the voltage restores to the normal level.
Programme time does not countdown. (On models with display)
• Timer may stop during water intake. >>> Timer indicator will not countdown until the machine takes in adequate amount of water.
The machine will wait until there is sufficient amount of water to avoid poor washing results due to lack of water. Timer indicator will
resume countdown after this.
• Timer may stop during heating step. >>> Timer indicator will not countdown until the machine reaches the selected temperature.
• Timer may stop during spinning step. >>> Automatic unbalanced load detection system might be activated due to the unbalanced
distribution of the laundry in the drum.
• Machine does not switch to spinning step when the laundry is not evenly distributed in the drum to prevent any damage to the machine and
to its surrounding environment. Laundry should be rearranged and re-spun.
Foam is overflowing from the detergent drawer.
• Too much detergent is used. >>> Mix 1 tablespoonful softener and ½ l water and pour into the main wash compartment of the
detergent drawer.
• Put detergent into the machine suitable for the programmes and maximum loads indicated in the “Programme and consumption table”.
When you use additional chemicals (stain removers, bleachs and etc), reduce the amount of detergent.
Laundry remains wet at the end of the programme
• Excessive foam might have occurred and automatic foam absorption system might have been activated due to too much detergent usage.
>>> Use recommended amount of detergent.
• Machine does not switch to spinning step when the laundry is not evenly distributed in the drum to prevent any damage to the machine and
to its surrounding environment. Laundry should be rearranged and re-spun.
Awarning: If you cannot eliminate the problem although you follow the instructions in this section, consult your dealer or the
Authorized Service Agent. Never try to repair a nonfunctional product yourself.

2820523261_CZ / 04-03-16.(16:44)
Číslo dokumentu=
Plně automatická pračka
Uživatel Manuální
WMI 71242
CZ