Beko WTE10746CHT1 User manual

Washing Machine
User Manual
WTE10746CHT1
2820529375_EN/ 22-03-21.(9:03)
Document Number :

2 / EN Washing Machine / User’s Manual
1 General safety instructions
This section contains safety instructions that will help protect from risk of
personal injury or property damage. Failure to follow these instructions shall
void any warranty.
1.1 Life and property safety
uNever place the product on a carpet-covered floor. Otherwise, lack of airflow
beneath the machine will cause electrical parts to overheat. This will cause
problems with your product.
uUnplug the product when it is not in use.
uAlways have the installation and repairing procedures carried out by the
Authorised Service Agent. The manufacturer shall not be held liable for
damages that may arise from procedures carried out by unauthorised
persons.
uThe water supply and draining hoses must be securely fastened and remain
undamaged. Otherwise, there is the risk of water leakage.
uNever open the loading door or remove the filter while there is still water in
the drum. Otherwise, risk of flooding and injury from hot water will occur.
uDo not force open the locked loading door. The door will open immediately
after the washing cycle has ended. If the door does not open, apply the
solutions provided for "Loading door cannot be opened." error in the
Troubleshooting section. In case of forcing the loading door to open, the
door and the lock mechanism may get damaged.
uUse detergents, softeners and supplements suitable for automatic washing
machines only.
uFollow the instructions on the textile tags and on the detergent package.
uLaundry that is previously washed, cleaned, soiled or stained with petrol /
gasoline, dry cleaning solvents or other flammable or explosive substances
must not be dried in the machine as they give out flammable or explosive
steam. For this reason, they must not be used in the Refresh programme or
in the Wash&Wear auxiliary function selection. It may cause fire risk.
This product was manufactured using the latest technology in environmentally friendly conditions.

3 / EN Washing Machine / User’s Manual
uLaundry stained with Liquid cooking oil, acetone, alcohol, petrol, kerosene,
spot removers, turpentine, waxes and wax removers must be washed in hot
water with plenty of detergent beforehand. After the washing programme,
it can be used in the Refresh programme or in the Wash&Wear auxiliary
function selection.
uFoam rubber (latex foam), shower caps, waterproof textiles, clothes or
pillows with rubber support or rubber foam pads must not be used in the
Wash&Wear auxiliary programme selection or in the Refresh programme. It
may cause fire risk.
uIf you use washing ball, detergent scale, laundry clothing cages and balls
in your machine, they can melt during drying. Do not use it in the Refresh
programme or in the Wash&Wear auxiliary function selection. It may cause
fire risk.
uIf you are using industrial chemicals for cleaning, never use the Refresh
programme or the Wash&Wear auxiliary programme. It may cause fire risk.
uDo not touch loading door glass with bare hands after drying. There is the
risk of getting burnt.
uIn the Refresh programme and the Wash&Wear auxiliary programme
selection, there is a cooling process as the final step to make sure that the
laundry remains at a temperature that will not harm the user. You may be
exposed to hot steam if you open the door before cooling is complete. There
is the risk of scalding.
uIf the programme is interrupted (programme cancellation or power failure)
during the Refresh programme or the Wash&Wear auxiliary function
selection, the laundry in the machine may be hot. Be careful.
uDuring the Refresh programme or the Wash&Wear auxiliary programme
selection, do not stop the machine before these steps are complete. If you
have to stop the machine, remove all laundry and lay them in a suitable
place to let them cool down.
uYour product is suitable to operate in ambient temperatures between 0OC
and +35OC.
uAmbient temperatures between 15OC and +25OC are ideal temperatures for
your product.
uDo not let pets enter the product. Check inside the product before using.
uDo not operate the Refresh programme and the Wash&Wear programme
after overloading the machine. Observe the maximum load levels specified.
uLeather laundry and laundry that contains leather must not be used in
the Refresh programme and the Wash&Wear auxiliary function selection.
Leather parts give away colour.

4 / EN Washing Machine / User’s Manual
uIn failures that cannot be repaired using information given in safety
instructions, turn off the machine, unplug the power cable and call the
Authorised Service Agent.
uThe machine must not be used only in the Refresh programme for a long
time. If it is being used only in the said programme for a long time, it must
be operated unloaded in one of the short washing programmes after every
15 cycles.
uCheck all clothes before loading them into the machine and ensure that
they do not have objects such as lighters, coins, metal pieces, needles in
the pockets or inside.
uUnderwear with metal attachments must not be used in the Refresh
programme and the Wash&Wear auxiliary function selection. Metal supports
might come off during drying and cause damage in the machine.
uLarge laundry such as tulles, rugs, blankets, duvets etc. must not be used
in the Refresh programme and the Wash&Wear auxiliary function selection.
Your laundry might get damaged.
uDo not use fabric softeners or static preventers in the machine unless
recommended by the manufacturer.
uProducts such as fabric softeners must be used in accordance with
manufacturer's instructions.
uDelicate laundry that contains silk, wool etc. must not be used in the
Refresh programme and the Wash&Wear auxiliary function selection.
Otherwise, wool clothes may get shrunken and other sensitive clothes may
get damaged.
uCheck symbols on the garment tag before starting the programmes.
1.2 Children's safety
uThis product can be used by children at and above 8 years old and by persons
whose physical, sensory or mental capabilities were not fully developed or
who lack experience and knowledge provided that they are supervised or
trained on the safe usage of the product and the risks it brings out. Children
should not play with the product. Cleaning and maintenance works should
not be performed by children unless they are supervised by someone.
Children under the age of 3 should be kept away unless continuously
supervised.
uPackaging materials are dangerous to children. Keep packaging materials
in a safe place away from reach of the children.

5 / EN Washing Machine / User’s Manual
uElectrical products are dangerous for the children. Keep children away from
the product when it is in use. Do not allow them to play with the product.
Use child lock to prevent children from intervening with the product.
uDo not forget to close the loading door when leaving the room where the
product is located.
uStore all detergents and additives in a safe place away from the reach of
the children by closing the cover of the detergent container or sealing the
detergent package.
1.3 Electrical safety
uIf the product has a failure, it should not be operated unless it is repaired by
the Authorised Service Agent. There is risk of electric shock!
uThis product is designed to resume operating in the event of powering
on after a power interruption. If you wish to cancel the programme, see
"Cancelling the programme" section.
uConnect the product to a grounded outlet protected by a 16 A fuse. Do not
neglect to have the grounding installation made by a qualified electrician.
Our company shall not be liable for any damages that may arise when the
product is used without grounding in accordance with the local regulations.
uNever wash the product by spreading or pouring water onto it! There is risk
of electric shock!
uNever touch the power cable plug with wet hands! Never unplug by pulling
on the cable. Always press on the plug with one hand and pull out the plug
by grabbing with the other hand.
uProduct should be unplugged during installation, maintenance, cleaning
and repair procedures.
uIf the power cable is damaged, it must be replaced by the manufacturer,
authorized service or a similarly qualified person (preferably an electrician)
or someone designated by the importer in order to avoid possible risks.
1.4 Hot surface safety
The glass of the loading door gets too hot while
washing at higher temperatures. Therefore,
especially do not allow children touch the
loading door glass while washing.

6 / EN Washing Machine / User’s Manual
2Important instructions for environment
2.1 Compliance with WEEE Directive
This product complies with EU WEEE Directive (2012/19/EU). This product bears a
classification symbol for waste electrical and electronic equipment (WEEE).
This product has been manufactured with high quality parts and materials which can be
reused and are suitable for recycling. Do not dispose of the waste product with normal
domestic and other wastes at the end of its service life. Take it to the collection center for the
recycling of electrical and electronic equipment. Please consult your local authorities to learn
about these collection centers.
Compliance with RoHS Directive:
The product you have purchased complies with EU RoHS Directive (2011/65/EU). It does not contain harmful
and prohibited materials specified in the Directive.
2.2 Package information
Packaging materials of the product are manufactured from recyclable materials in accordance with our
National Environment Regulations. Do not dispose of the packaging materials together with the domestic or
other wastes. Take them to the packaging material collection points designated by the local authorities.
3 Intended use
• This product has been designed for domestic use. It is not suitable for commercial use and it must not be
used out of its intended use.
• The product must only be used for washing, rinsing and making ready to wear the laundry that are marked
accordingly.
• The manufacturer waives any responsibility arisen from incorrect usage or transportation.
• The service life of your product is 10 years. During this period, original spare parts will be available to
operate the product properly.
• This appliance is intended to be used in household and similar applications such as:
– staff kitchen areas in shops, offices and other working environments;
– farm houses;
– by clients in hotels, motels and other residential type environments;
– bed and breakfast type environments;
– areas for communal use in blocks of flats or in launderettes.

7 / EN Washing Machine / User’s Manual
4Technical specifications
AWARNING: Consumption values are applicable for cases where the wireless network connection is off.
C
SUPPLIER’S NAME MODEL IDENTIFIER
A
A
(*)
The model information as stored in the product database can be reached by
entering following website and searching for your model identifier (*) found
on energy label.
https://eprel.ec.europa.eu/
Supplier name or trademark Beko
Model name WTE10746CHT1
7158143800
Rated capacity (kg) 10
Maximum spin speed (rpm) 1400
Built-in No
Height (cm) 84
Width (cm) 60
Depth (cm) 64
Single Water inlet / Double Water inlet • / -
• Available
Electrical input (V/Hz) 230 V / 50Hz
Total current (A) 10
Total power (W) 2200
Main model code 1314
Rinse Spin+Drain
Prewash Fast Fast+ Extra
Rinse
Extra
Water
Anti
Crease
Pet Hair
Removal
Rinse
Hold
No
Water
Drain
Soaking
Spin No
Spin
Tap
Water
(Cold)
Steam
Time
Delay
Night
Modu
Temperature Door
Lock
Child
Lock
On/Off Start /
Pause
Soil Level Add
Garment
AutoDose Liquid
Detergent
Selection
Softener
Selection
Wash
Downloaded
Program
Steeping
Ok
(End)
Cancel AntiCrease+ Iron
Dry
Cupboard
Dry
Extra
Dry
Timed
Drying
Clean&
Wear
Symbols Table
Drying

8 / EN Washing Machine / User’s Manual
4.1 Installation
• Apply to the nearest authorized service agent for the installation of your product.
• Preparation of the location and electrical, tap water and waste water installations at the place of installation
is under customer's responsibility.
• Make sure that the water inlet and discharge hoses as well as the power cable are not folded, pinched or
crushed while pushing the product into its place after installation or cleaning procedures.
• Make sure that the installation and electrical connections of the product are performed by authorized
service agent. The manufacturer shall not be held liable for damages that may arise from procedures
carried out by unauthorised persons.
• Prior to installation, visually check if the product has any defects on it. If so, do not have it installed.
Damaged products cause risks for your safety.
• Operate the product in a well ventilated and dust free environment.
4.1.1 Appropriate installation location
• Place the product on a solid and level floor. Do not place it onto a carpet with high pile or other similar
surfaces.
• Total weight of the washing machine and the dryer -with full load- when they are placed on top of each
other reaches to approx. 180 kilograms. Place the product on a solid and flat floor that has sufficient load
carrying capacity!
• Do not place the product on the power cable.
• Do not install the product at places where temperature may fall below 0ºC.
• Leave a minimum space of 1.5 cm between the product and the furniture.
• If you will install the product on a surface with steps, never place it close to the edge.
• Do not place the product on any platform.
• Do not place heat sources such as Hobs, Irons, Ovens, etc. on the washing machine and do not use them
on the product.
4.1.2 Removing packaging reinforcement
Tilt the product backwards to remove the packaging reinforcement.
Remove the packaging reinforcement by pulling the ribbon. Do not make
this operation alone by yourself.
4.1.3 Removing transportation safety bolts
1 Loosen all transportation safety bolts with an appropriate wrench until they turn freely.
2 Remove transportation safety bolts by turning them gently.
3 Attach the plastic covers supplied in the User Manual bag into the holes on the rear panel.

9 / EN Washing Machine / User’s Manual
AWARNING: Remove the transportation safety bolts before operating the product! Otherwise, the product will get
damaged.
CKeep the transportation safety bolts in a safe place to reuse when the product needs to be moved again in the future.
Install the transportation safety bolts in reverse order of the disassembly procedure.
Never move the product without the transportation safety bolts properly fixed in place!
4.1.4 Connecting water supply
CThe water supply pressure required to run the product is between 1 to 10 bars (0.1 – 1 MPa). It is necessary to have 10 –
80 liters of water flowing from the fully open tap in 1 minute to have your product run smoothly. Attach a pressure reducing
valve if water pressure is higher.
If you are going to use the double water-inlet product as a single (cold) water-inlet unit, you must install the supplied stopper
to the hot water valve before operating the product. (Applies for the products supplied together with a blind stopper group.)
AWARNING: Models with a single water inlet should not be connected to the hot water tap. In such a case the laundry will
get damaged or the product will switch to protection mode and will not operate.
WARNING: Do not use old or used water inlet hoses on the new product. It may cause stains on your laundry.
1 Tighten all hose nuts by hand. Never use a tool when tightening the nuts.
2 Open the taps completely after making the hose connection to check for water leaks at the connection
points. If any leak occurs, turn off the tap and remove the nut. Retighten the nut carefully after checking
the gasket. In order to prevent the water leaks and resultant damages, keep the taps closed when you do
not use the product.
4.1.5 Connecting the drain hose to the drain
• Attach the end of the drain hose directly to waste water drain, washbasin or bathtub.
AWARNING: Your house will be flooded if the drain hose is dislocated during water draining. Moreover, there is risk of
scalding due to high washing temperatures! In order to prevent such situations and make sure that the product performs
water intake and drain processes without any problem, fix the drain hose securely.
• Connect the drain hose to a minimum height of 40 cm and a maximum height of 100 cm.
• In case the drain hose is elevated after laying it on the floor level or close to the ground (less than 40 cm
above the ground), water draining becomes more difficult and the laundry may come out excessively wet.
Therefore, observe the heights described in the figure.
40 cm
100 cm
• To prevent the waste water to go back into the product again and to ensure easy drainage, do not immerse
the end of the hose into the waste water or do not insert it into the drain for more than 15 cm. If it is too
long, cut it short.

10 / EN Washing Machine / User’s Manual
• The end of the hose should not be bent, it should not be stepped on and the hose must not be pinched
between the drain and the product.
• If the length of the hose is too short, use it by adding an original extension hose. Length of the hose may
not be longer than 3.2 m. To avoid water leak failures, the connection between the extension hose and the
drain hose of the product must be fitted well with an appropriate clamp as not to come off and leak.
4.1.6 Adjusting the feet
AWARNING: In order to ensure that the product operates more silently and vibration-free, it must stand level and
balanced on its feet. Balance the machine by adjusting the feet. Otherwise, the product may move from its place and cause
crushing, noise and vibration problems.
WARNING: Do not use any tools to loosen the lock nuts. Otherwise, they will get damaged.
1 Loosen the lock nuts on the feet by hand.
2 Adjust the feet until the product stands level and balanced.
3 Tighten all lock nuts again by hand.
4.1.7 Electrical connection
Connect the product to a grounded outlet protected by a 16 A fuse. Our company shall not be liable for any
damages that may arise when the product is used without grounding in accordance with the local regulations.
• Connection must comply with national regulations.
• The electrical connection cable infrastructure of the product must be adequate and suitable for product
requirements. It is recommended to use a residual current device.
• Power cable plug must be within easy reach after installation.
• If the current value of the fuse or breaker in the house is less than 16 Amps, have a qualified electrician
install a 16 Amp fuse.
• The voltage specified in the "4. Technical specifications" section must be equal to your mains voltage.
• Do not make connections via extension cables or multi-plugs.
BWARNING: Damaged power cables must be replaced by the Authorised Service Agent.
4.1.8 Initial use
Before starting to use the product make sure that the preparations
described in section “2. Environmental instructions” and “4.1 Installation”.
To prepare the product for washing laundry, perform first operation
in Drum Cleaning programme. If this program is not available in your
product, apply the method which is described in section "4.4.2 Cleaning
the loading door and the drum".
CUse an anti-limescale suitable for the washing machines.
Some water has remained in the product due to the quality control processes in the production. It is not harmful for the
product.