Beko WMY 71023 LMB3 User manual

2820524319_EN / 12-03-15.(9:57)
WMY 71023 LMB3
Washing Machine
User’s Manual
Document Number
Lavatrice
Manuale utente

This product was manufactured using the latest technology in environmentally friendly conditions.
1 Important nstructons for safety and envronment
This section contains safety instructions that will help protect from risk of personal
injury or property damage. Failure to follow these instructions shall void any warran-
ty.
1.1 General safety
• This product can be used by children at and above 8 years old and by persons
whose physical, sensory or mental capabilities were not fully developed or who
lack experience and knowledge provided that they are supervised or trained on
the safe usage of the product and the risks it brings out. Children must not play
with the product. Cleaning and maintenance works should not be performed by
children unless they are supervised by someone. Children of less than 3 years
should be kept away unless continuously supervised.
• Never place the product on a carpet-covered floor. Otherwise, lack of airflow be-
neath the machine will cause electrical parts to overheat. This will cause problems
with your product.
• If the product has a failure, it should not be operated unless it is repaired by the
Authorized Service Agent. There is the risk of electric shock!
• This product is designed to resume operating in the event of powering on after a
power interruption. If you wish to cancel the programme, see "Cancelling the pro-
gramme" section.
• Connect the product to a grounded outlet protected by a 16 A fuse. Do not neglect
to have the grounding installation made by a qualified electrician. Our company
shall not be liable for any damages that will arise when the product is used wi-
thout grounding in accordance with the local regulations.
• The water supply and draining hoses must be securely fastened and remain unda-
maged. Otherwise, there is the risk of water leakage.
• Never open the loading door or remove the filter while there is still water in the
drum. Otherwise, risk of flooding and injury from hot water will occur.
• Do not force open the locked loading door. The loading door will be ready to open
just a few minutes after the washing cycle comes to an end. In case of forcing the
loading door to open, the door and the lock mechanism may get damaged.
• Unplug the product when not in use.
• Never wash the product by spreading or pouring water onto it! There is the risk of
electric shock!
• Never touch the plug with wet hands! Never unplug by pulling on the cable, always
pull out by grabbing the plug.
• Use detergents, softeners and supplements suitable for automatic washing ma-
chines only.

3/ EN
Washing Machine / User’s Manual
• Follow the instructions on the textile tags and on the detergent package.
• The product must be unplugged during installation, maintenance, cleaning and
repairing procedures.
• Always have the installation and repairing procedures carried out by the
Authorized Service Agent. Manufacturer shall not be held liable for damages that
may arise from procedures carried out by unauthorized persons.
• If the power cable is damaged, it must be replaced by the manufacturer, after
sales service or a similarly qualified person (preferably an electrician) or someone
designated by the importer in order to avoid possible risks.
• Place the product on a rigid, flat and level surface.
• Do not place it on a long-pile rug or similar surfaces.
• Do not place the product on a high platform or near the edge on a cascaded surfa-
ce.
• Do not place the product on the power cable.
• Never use sponge or scrub materials. These will damage the painted, chrome pla-
ted and plastic surfaces.
1.2 Intended use
• This product has been designed for domestic use. It is not suitable for commercial
use and it must not be used out of its intended use.
• The product must only be used for washing and rinsing of laundry that are marked
accordingly.
• The manufacturer waives any responsibility arisen from incorrect usage or trans-
portation.
1.3 Chldren's safety
• Packaging materials are dangerous to children. Keep packaging materials in a safe
place away from reach of the children.
• Electrical products are dangerous for the children. Keep children away from the
product when it is in use. Do not let them to tamper with the product. Use child
lock to prevent children from intervening with the product.
• Do not forget to close the loading door when leaving the room where the product
is located.
• Store all detergents and additives in a safe place away from the reach of the chil-
dren by closing the cover of the detergent container or sealing the detergent pac-
kage.
While washing the laundry at high temperatures, the loading door
glass becomes hot. Therefore, keep especially the children away
from the loading door of the machine while the washing operation
is in progress.

4/ EN
Washing Machine / User’s Manual
1.4 Package nformaton
• Packaging materials of the product are manufactured from recyclable materials
in accordance with our National Environment Regulations. Do not dispose of the
packaging materials together with the domestic or other wastes. Take them to
the packaging material collection points designated by the local authorities.
1.5 Dsposng of the waste product
• This product has been manufactured with high quality parts and materials which
can be reused and are suitable for recycling. Therefore, do not dispose the product
with normal domestic waste at the end of its service life. Take it to a collection
point for the recycling of electrical and electronic equipment. Please consult your
local authorities to learn the nearest collection point. Help protect the environ-
ment and natural resources by recycling used products. For children's safety, cut
the power cable and break the locking mechanism of the loading door so that it
will be non-functional before disposing of the product.
1.6 Complance wth WEEE Drectve
This product complies with EU WEEE Directive (2012/19/EU).
This product bears a classification symbol for waste electrical
and electronic equipment (WEEE).
This product has been manufactured with high quality parts
and materials which can be reused and are suitable for recy-
cling. Do not dispose of the waste product with normal domes-
tic and other wastes at the end of its service life. Take it to the
collection center for the recycling of electrical and electronic
equipment. Please consult your local authorities to learn about
these collection centers.
Compliance with RoHS Directive:
The product you have purchased complies with EU RoHS
Directive (2011/65/EU). It does not contain harmful and prohi-
bited materials specified in the Directive.

5/ EN
Washing Machine / User’s Manual
2 Installation
Refer to the nearest Authorised Service Agent for
installation of the product. To make the product ready
for use, review the information in the user manual
and make sure that the electricity, tap water supply
and water drainage systems are appropriate before
calling the Authorized Service Agent. If they are not,
call a qualified technician and plumber to have any
necessary arrangements carried out.
C
NOTE : Preparation of the location and electrical,
tap water and waste water installations at
the place of installation is under customer's
responsibility.
NOTE : Make sure that the water inlet and
discharge hoses as well as the power cable are
not folded, pinched or crushed while pushing the
product into its place after installation or cleaning
procedures.
B
DANGER: Installation and electrical connections
of the product must be carried out by the
Authorized Service Agent. Manufacturer shall not
be held liable for damages that may arise from
procedures carried out by unauthorized persons.
A
CAUTION: Prior to installation, visually check
if the product has any defects on it. If so, do not
have it installed. Damaged products cause risks for
your safety.
2.1 Appropriate installation location
• Place the machine on a rigid floor. Do not place it on
a long pile rug or similar surfaces.
• Total weight of the washing machine and the dryer
-with full load- when they are placed on top of each
other reaches to approx. 180 kilograms. Place the
product on a solid and flat floor that has sufficient
load carrying capacity!
• Do not place the product on the power cable.
• Do not install the product at places where
temperature may fall below 0ºC.
• Place the product at least 1 cm away from the edges
of other furniture.
2.2 Removing packaging reinforcement
Tilt the machine backwards to remove the packaging
reinforcement. Remove the packaging reinforcement
by pulling the ribbon.
2.3 Removing the transportation locks
A
WARNING: Do not remove the transportation
locks before taking out the packaging
reinforcement.
WARNING: Remove the transportation safety
bolts before operating the washing machine!
Otherwise, the product will be damaged.
1. Loosen all the bolts with a suitable spanner until
they rotate freely (C) .

6/ EN
Washing Machine / User’s Manual
2. Remove transportation safety bolts by turning them
gently.
3. Attach the plastic covers supplied in the User
Manual bag into the holes on the rear panel. (P)
C
NOTE : Keep the transportation safety bolts in
a safe place to reuse when the washing machine
needs to be moved again in the future.
NOTE : Never move the product without the
transportation safety bolts properly fixed in place!
2.4 Connecting water supply
C
NOTE : The water supply pressure required to run
the product is between 1 to 10 bars (0.1 – 1 MPa). It
is necessary to have 10 – 80 liters of water flowing
from the fully open tap in one minute to have your
machine run smoothly. Attach a pressure reducing
valve if water pressure is higher.
NOTE : If you are going to use the double water-
inlet product as a single (cold) water-inlet unit,
you must install the supplied stopper to the hot
water valve before operating the product. (Applies
for the products supplied with a blind stopper
group.)
A
WARNING: Models with a single water inlet
should not be connected to the hot water tap. In
such a case the laundry will get damaged or the
product will switch to protection mode and will not
operate.
WARNING: Do not use old or used water inlet
hoses on the new product. It may cause stains on
your laundry.
1. Connect the special hoses supplied with the product
to the water inlets on the product. Red hose (left)
(max. 90 ºC) is for hot water inlet, blue hose (right)
(max. 25 ºC) is for cold water inlet.
A
CAUTION: Ensure that the cold and hot water
connections are made correctly when installing the
product. Otherwise, your laundry will come out hot
at the end of the washing process and wear out.
2. Tighten all hose nuts by hand. Never use a tool
when tightening the nuts.
3. Open the taps completely after making the
hose connection to check for water leaks at the
connection points. If any leaks occur, turn off the
tap and remove the nut. Retighten the nut carefully
after checking the seal. To prevent water leakages
and damages caused by them, keep the taps closed
when the machine is not in use.

7/ EN
Washing Machine / User’s Manual
2.5 Connecting to the drain
• The end of the drain hose must be directly
connected to the wastewater drain or to the
washbasin.
A
CAUTION: Your house will be flooded if the hose
comes out of its housing during water discharge.
Moreover, there is risk of scalding due to high
washing temperatures! To prevent such situations
and to ensure smooth water intake and discharge
of the machine, fix the end of the discharge hose
tightly so that it cannot come out.
• The hose should be attached to a height of at least
40 cm, and 100 cm at most.
• In case the hose is elevated after laying it on the
floor level or close to the ground (less than 40 cm
above the ground), water discharge becomes more
difficult and the laundry may come out excessively
wet. Therefore, follow the heights described in the
figure.
100cm
40cm
• To prevent flowing of dirty water back into the
machine and to allow for easy discharge, do not
immerse the hose end into the dirty water or do not
drive it in the drain more than 15 cm. If it is too long,
cut it short.
• The end of the hose should not be bent, it should
not be stepped on and the hose must not be
pinched between the drain and the machine.
• If the length of the hose is too short, use it by
adding an original extension hose. Length of the
hose may not be longer than 3.2 m. To avoid water
leak failures, the connection between the extension
hose and the drain hose of the product must be
fitted well with an appropriate clamp as not to come
off and leak.
2.6 Adjusting the feet
A
CAUTION: In order to ensure that the product
operates more silently and vibration-free, it must
stand level and balanced on its feet. Balance
the machine by adjusting the feet. Otherwise,
the product may move from its place and cause
crushing and vibration problems.
1. Loosen the lock nuts on the feet by hand.
2. Adjust the feet until the product stands level and
balanced.
3. Tighten all lock nuts again by hand.
A
WARNING: Do not use any tools to loosen the
lock nuts. Otherwise, they will get damaged.
2.7 Electrical connection
Connect the product to a grounded outlet protected
by a 16 A fuse. Our company shall not be liable for
any damages that will arise when the product is
used without grounding in accordance with the local
regulations.
• Connection must comply with national regulations.
• Power cable plug must be within easy reach after
installation.
• If the current value of the fuse or breaker in the
house is less than 16 Amps, have a qualified
electrician install a 16 Amp fuse.
• The voltage specified in the "Technical
specifications" section must be equal to your mains
voltage.
• Do not make connections via extension cables or
multi-plugs.
B
DANGER: Damaged power cables must be
replaced by the Authorized Service Agents.
Transportation of the product
1. Unplug the product before transporting it.
2. Remove water drain and water supply connections.
3. Drain all water that has remained in the product.
4. Install transportation safety bolts in the reverse
order of removal procedure;
C
NOTE : Never move the product without the
transportation safety bolts properly fixed in place!
A
CAUTION: Packaging materials are dangerous
to children. Keep packaging materials in a safe
place away from reach of the children.

8/ EN
Washing Machine / User’s Manual
3 Preparation
3.1 Sorting the laundry
• Sort laundry according to type of fabric, colour, and
degree of soiling and allowable water temperature.
• Always obey the instructions given on the garment
tags.
3.2 Preparing laundry for washing
• Laundry items with metal attachments such as,
underwired bras, belt buckles or metal buttons will
damage the machine. Remove the metal pieces or
wash the clothes by putting them in a laundry bag or
pillow case.
• Take out all substances in the pockets such as coins,
pens and paper clips, and turn pockets inside out
and brush. Such objects may damage the product or
cause noise problem.
• Put small size clothes such as infant's socks and
nylon stockings in a laundry bag or pillow case.
• Place curtains in without compressing them.
Remove curtain attachment items.
• Fasten zippers, sew loose buttons and mend rips
and tears.
• Wash “machine washable” or “hand washable”
labeled products only with an appropriate
programme.
• Do not wash colours and whites together. New, dark
coloured cottons release a lot of dye. Wash them
separately.
• Tough stains must be treated properly before
washing. If unsure, check with a dry cleaner.
• Use only dyes/colour changers and limescale
removers suitable for machine wash. Always follow
the instructions on the package.
• Wash trousers and delicate laundry turned inside
out.
• Keep laundry items made of Angora wool in the
freezer for a few hours before washing. This will
reduce pilling.
• Laundry that are subjected to materials such as
flour, lime dust, milk powder, etc. intensely must be
shaken off before placing into the machine. Such
dusts and powders on the laundry may build up on
the inner parts of the machine in time and can cause
damage.
3.3 Things to be done for energy saving
Following information will help you use the product in
an ecological and energy-efficient manner.
• Operate the product in the highest capacity allowed
by the programme you have selected, but do not
overload; see, "Programme and consumption table".
• Always follow the instructions on the detergent
packaging.
• Wash slightly soiled laundry at low temperatures.
• Use faster programmes for small quantities of lightly
soiled laundry.
• Do not use prewash and high temperatures for
laundry that is not heavily soiled or stained.
• If you plan to dry your laundry in a dryer, select the
highest spin speed recommended during washing
process.
• Do not use detergent in excess of the amount
recommended on the detergent package.
3.4 Initial use
Before starting to use the product, make sure that
all preparations are made in accordance with the
instructions in sections “Important safety instructions”
and “Installation”.
To prepare the product for washing laundry, perform
first operation in Drum Cleaning programme. If
your product is not equipped with Drum Cleaning
programme, perform the Initial Use procedure in
accordance with the methods described under “5.2
Cleaning the loading door and the drum” section of the
user manual.
C
NOTE : Use an anti-limescale suitable for the
washing machines.
NOTE : Some water might have remained in the
product due to the quality control processes in the
production. It is not harmful for the product.
3.5 Correct load capacity
The maximum load capacity depends on the type
of laundry, the degree of soiling and the washing
programme desired.
The machine automatically adjusts the amount of
water according to the weight of the loaded laundry.
A
CAUTION: Follow the information in the
“Programme and consumption table”. When
overloaded, machine's washing performance will
drop. Moreover, noise and vibration problems may
occur.
3.6 Loading the laundry
1. Open the loading door.
2. Place laundry items loosely into the machine.
3. Push the loading door to close until you hear a
locking sound. Ensure that no items are caught in
the door.
C
NOTE : The loading door is locked while a
programme is running. The door can only be opened
a while after the programme comes to an end.
A
CAUTION: In case of misplacing the laundry, noise
and vibration problems may occur in the machine.
3.7 Using detergent and softener
C
NOTE : When using detergent, softener, starch,
fabric dye, bleach or limescale remover read the
manufacturer's instructions on the package
carefully and follow the suggested dosage values.
Use measuring cup if available.
Detergent Drawer
The detergent drawer is composed of three
compartments:
– (1) for prewash
– (2) for main wash
– (3) for softener
– (*) in addition, there is siphon piece in the softener
compartment.

9/ EN
Washing Machine / User’s Manual
1
3
2
Detergent, softener and other cleaning agents
• Add detergent and softener before starting the
washing programme.
• Never leave the detergent drawer open while the
washing programme is running!
• When using a programme without prewash, do not
put any detergent into the prewash compartment
(compartment nr. "1").
• In a programme with prewash, do not put liquid
detergent into the prewash compartment
(compartment nr. "1").
• Do not select a programme with prewash if you are
using a detergent bag or dispensing ball. Place the
detergent bag or the dispensing ball directly among
the laundry in the machine.
• If you are using liquid detergent, do not forget to
place the liquid detergent cup into the main wash
compartment (compartment nr. "2").
Choosing the detergent type
The type of detergent to be used depends on the type
and colour of the fabric.
• Use different detergents for coloured and white
laundry.
• Wash your delicate clothes only with special
detergents (liquid detergent, wool shampoo, etc.)
used solely for delicate clothes.
• When washing dark coloured clothes and quilts, it is
recommended to use liquid detergent.
• Wash woolens with special detergent made
specifically for woolens.
A
CAUTION: Use only detergents manufactured
specifically for washing machines.
CAUTION: Do not use soap powder.
Adjusting detergent amount
The amount of washing detergent to be used depends
on the amount of laundry, the degree of soiling and
water hardness.
• Do not use amounts exceeding the dosage
quantities recommended on the detergent package
to avoid problems of excessive foam, poor rinsing,
financial savings and finally, environmental
protection.
• Use lesser detergent for small amounts or lightly
soiled clothes.
Using softeners
Pour the softener into the softener compartment of
the detergent drawer.
• Do not exceed the (>max<) level marking in the
softener compartment.
• If the softener has lost its fluidity, dilute it with
water before putting it in the detergent drawer.
Using liquid detergents
If the product contains a liquid detergent cup:
• Make sure that you have placed the liquid detergent
cup in compartment nr. "2".
• If the lqud detergent has lost ts fludty, dlute t
wth water before puttng n the detergent cup.
Clothes
Lght colours and whtes
(Recommended temperature range
based on soiling level: 40-90 °C)
Soiling Level
Heavly Soled
(difficult stains
such as grass,
coffee, fruits
and blood.)
It may be necessary to pre-treat the
stains or perform prewash. Powder
and liquid detergents recommended
for whites can be used at dosages
recommended for heavily soiled clothes.
It is recommended to use powder
detergents to clean clay and soil stains
and the stains that are sensitive to
bleaches.
Normally
Soled
(For example,
stains caused
by body on
collars and
cuffs)
Powder and liquid detergents
recommended for whites can be used
at dosages recommended for normally
soiled clothes.
Lghtly Soled
(No visible
stains exist.)
Powder and liquid detergents
recommended for whites can be used
at dosages recommended for lightly
soiled clothes.

10 / EN
Washing Machine / User’s Manual
Clothes
Colours
(Recommended temperature range
based on soiling level: cold -40 °C)
Soiling Level
Heavly Soled
Powder and liquid detergents
recommended for colours can be used
at dosages recommended for heavily
soiled clothes. It is recommended to
use powder detergents to clean clay
and soil stains and the stains that are
sensitive to bleaches. Use detergents
without bleach.
Normally
Soled
Powder and liquid detergents
recommended for colours can be used
at dosages recommended for normally
soiled clothes. Use detergents without
bleach.
Lghtly Soled
Powder and liquid detergents
recommended for colours can be used
at dosages recommended for lightly
soiled clothes. Use detergents without
bleach.
Dark colours
(Recommended temperature range
based on soiling level: cold -40 °C)
Soiling Level
Heavly Soled
Liquid detergents suitable for colours
and dark colours can be used at
dosages recommended for heavily
soiled clothes.
Normally
Soled
Liquid detergents suitable for colours
and dark colours can be used at
dosages recommended for normally
soiled clothes.
Lghtly Soled
Liquid detergents suitable for colours
and dark colours can be used at
dosages recommended for lightly soiled
clothes.
Delicates/Woollens/Silks
(Recommended temperature range
based on soiling level: cold -30 °C)
Soiling Level
Heavly Soled
Prefer liquid detergents produced
for delicate clothes. Woollen and silk
clothes must be washed with special
woollen detergents.
Normally
Soled
Prefer liquid detergents produced
for delicate clothes. Woollen and silk
clothes must be washed with special
woollen detergents.
Lghtly Soled
Prefer liquid detergents produced
for delicate clothes. Woollen and silk
clothes must be washed with special
woollen detergents.
If the product does not contain a liquid detergent
cup:
• Do not use liquid detergent for the prewash in a
programme with prewash.
• Liquid detergent stains your clothes when used with
Delayed Start function. If you are going to use the
Delayed Start function, do not use liquid detergent.
Using gel and tablet detergent
Apply the following instructions when using tablet, gel
and similar detergents.
• If the gel detergent thickness is fluidal and your
machine does not contain a special liquid detergent
cup, put the gel detergent into the main wash
detergent compartment during first water intake.
If your machine contains a liquid detergent cup,
fill the detergent into this cup before starting the
programme.
• If the gel detergent thickness is not fluidal or in the
shape of capsule liquid tablet, put it directly into the
drum before washing.
• Put tablet detergents into the main wash
compartment (compartment nr. "2") or directly into
the drum before washing.
C
NOTE : Tablet detergents may leave residues
in the detergent compartment. If you encounter
such a case, place the tablet detergent between
the laundry, close to the lower part of the drum in
future washings.
NOTE : Use the tablet or gel detergent without
selecting the prewash function.
Using starch
• Add liquid starch, powder starch or the fabric dye
into the softener compartment.
• Do not use softener and starch together in a
washing cycle.
• Wipe the inside of the machine with a damp and
clean cloth after using starch.
Using bleaches
• Select a programme with prewash and add the
bleaching agent at the beginning of the prewash.
Do not put detergent in the prewash compartment.
As an alternative application, select a programme
with extra rinse and add the bleaching agent while
the machine is taking water from the detergent
compartment during first rinsing step.
• Do not use bleaching agent and detergent by mixing
them.
• Use just a little amount (approx. 50 ml) of bleaching
agent and rinse the clothes very well as it causes
skin irritation. Do not pour the bleaching agent onto
the clothes and do not use it for coloured clothes.
• When using oxygen based bleaches, select a
programme that washes at a lower temperature.
• Oxygen based bleaches can be used together with
detergents; however, if its thickness is not the same
with the detergent, put the detergent first into the
compartment nr. "2" in the detergent drawer and
wait until the detergent flows while the machine is
taking in water. Add the bleaching agent from the
same compartment while the machine is still taking
in water.
Using limescale remover
• When required, use limescale removers
manufactured specifically for washing machines
only.

11 / EN
Washing Machine / User’s Manual
4 Operating the product
4.1 Control panel
1 - Programme Selecton knob (Uppermost poston On
/ Off)
2 - Delayed Start Indcator
3 - Programme Follow-up ndcator
4 - Start / Pause button
5 - Auxlary Functon buttons
6 - Spn Speed Adjustment button
7 - Temperature Adjustment button
4.2 Preparing the machine
1.Make sure that the hoses are connected tghtly.
2.Plug n your machne.
3.Turn the tap on completely.
4.Place the laundry n the machne.
5.Add detergent and fabrc softener.
4.3 Programme selecton and tps for
effcent washng
1. Select the programme sutable for the type, quantty
and solng degree of the laundry n accordance wth
the "Programme and consumpton table" and the
temperature table below.
2.Select the desred programme wth the Programme
Selecton button.
4.4 Man programmes
Dependng on the type of fabrc, use the followng
man programmes.
• Cotone (Cottons)
Use ths programme for your cotton laundry (such
as bed sheets, duvet and pllowcase sets, towels,
bathrobes, underwear, etc.). Your laundry wll be
washed wth vgorous washng acton for a longer
washng cycle.
• Sintetici (Synthetics)
Use ths programme to wash your synthetc clothes
(shrts, blouses, synthetc/cotton blends, etc.). It
washes wth a gentle acton and has a shorter washng
cycle compared to the Cotton programme.
For curtans and tulle, use the Synthetc 40°C
programme wth prewash and ant-creasng functons
selected. As ther meshed texture causes excessve
foamng, wash the vels/tulle by puttng lttle amount
of detergent nto the man wash compartment. Do not
put detergent n the prewash compartment.
• Lana (Woollens)
Use ths programme to wash your woolen clothes.
Select the approprate temperature complyng wth
the tags of your clothes. Use approprate detergents
for woollens.
“The wool wash cycle of this machine has been
approved by The Woolmark Company for the
washing of machine washable wool products
provided that the products are washed according
to the instructions on the garment label and
those issued by the manufacturer of this
washing machine. M14095”
“In UK, Eire, Hong Kong and India the Woolmark
trade mark is a Certification trade mark.”
4.5 Additional programmes
For specal cases, addtonal programmes are avalable
n the machne.
C
Additional programmes may differ according to the
model of the machine.
• Cotone Eco (Cotton Economic)
By washng normally soled cotton and lnen laundry
n ths programme, you can ensure hgher energy and
water effcency than other cotton programmes do.
Actual water temperature may be dfferent from the
stated wash temperature. Whle dong the laundry
at lesser amounts (e.g. half capacty or less) duraton
of the program may reduce automatcally at the
later stages of the program. In ths case, energy and
water consumpton wll reduce for a more economc
wash. Ths feature s provded n the models wth the
remanng tme ndcator.
1 2
3
4567

12 / EN
Washing Machine / User’s Manual
• BabyProtect
Ths s a long lastng programme whch you may use
for your laundry for whch you requre an ant-allergc
and hygenc washng at hgh temperature wth
ntensve and long washng cycle.
• Delcat 20° (Delcate 20°)
You can wash your delcate clothes n ths programme.
It washes wth a gentler acton wthout any nterm
spns compared to the Synthetcs programme. It
should be used for clothes for whch delcate washng
s recommended.
• Lavaggio a Mano 20° (Hand wash)
Use ths programme to wash your woolen/delcate
clothes that bear “not machne- washable” tags and
for whch hand wash s recommended. It washes
laundry wth a very gentle washng acton to not to
damage clothes.
• Xpress (Daly express)
Use ths programme to wash your lghtly soled cotton
clothes n a short tme.
• Super Short (Super short express)
Use ths programme to wash your lttle amount of
lghtly soled cotton clothes n a short tme. Your
clothes wll be washed at 30 °C n a short tme lke 14
mnutes.
• Capi Scuri (Darkcare)
Use ths programme to wash your dark coloured
laundry or the laundry that you do not want t get
faded. Washng s performed wth lttle mechanc
acton and at low temperatures. It s recommended
to use lqud detergent or woolen shampoo for dark
coloured laundry.
• Mix 40 (Mixed 40 (Mix 40))
Use ths programme to wash your cotton and
synthetc clothes together wthout sortng them.
• Camicie (Shirts)
Use ths programme to wash the shrts made of
cotton, synthetc and synthetc blended fabrcs
together.
• Hygene 20°
Use ths programme for your laundry for whch you
requre washng at lower temperature wth ntensve
and long washng cycle. Use ths programme for your
laundry for whch you requre hygenc washng at
lower temperature.
4.6 Special programmes
For specfc applcatons, select any of the followng
programmes.
• Risciacquo (Rinse)
Use ths programme when you want to rnse or starch
separately.
• Centrifuga+Scarico (Spin + Drain)
Use ths programme to apply an addtonal spn cycle
for your laundry or to dran the water n the machne.
Before selectng ths programme, select the desred
spn speed and press Start / Pause button. Frst, the
machne wll dran the water nsde of t. Then, t wll
spn the laundry wth the set spn speed and dran the
water comng out of them.
If you wsh to dran only the water wthout spnnng
your laundry, select the Pump+Spn programme and
then select the No Spn functon wth the help of Spn
Speed Adjustment button. Press Start / Pause button.
C
Use lower spin speeds for delicate laundries.
4.7 Temperature selection
Whenever a new programme s selected, the maxmum
temperature for the selected programme appears on
the temperature ndcator.
To decrease the temperature, press the Temperature
Adjustment button. Temperature wll decrease
gradually.
C
If the programme has not reached the heating
step yet, you can change the temperature without
switching the machine to Pause mode.
4.8 Speed selection
Whenever a new programme s selected, the
recommended spn speed of the selected programme
s dsplayed on the spn speed ndcator.
To decrease the spn speed, press the Spn Speed
Adjustment button. Spn speed decreases gradually.
Then, dependng on the model of the product, "Rnse
Hold" and "No Spn" optons appear on the dsplay. See
"Auxlary functon selecton" secton for explanatons
of these optons.
C
If the programme has not reached the spinning
step yet, you can change the speed without
switching the machine to Pause mode.
Rinse Hold
If you are not gong to unload your clothes mmedately
after the programme completes, you can use rnse
hold functon to keep your laundry n the fnal rnsng
water n order to prevent them from gettng wrnkled
when there s no water n the machne. Press Start /
Pause button after ths process f you want to dran
the water wthout spnnng your laundry. Programme
wll resume and complete after dranng the water.
If you want to spn the laundry held n water,
adjust the Spn Speed and press Start / Pause
button. Program resumes. Water s draned, laundry s
spun and the programme s completed.

13 / EN
Washing Machine / User’s Manual
4.9 Programme and consumption table
• : Selectable
* : Automatically selected, not cancellable.
** : Energy Label programme (EN 60456 Ed.3)
*** : If maximum spin speed of the machine is lower then this value, you can only select up to the maximum spin speed.
- : See the programme description for maximum load.
** “Cotton eco 40°C and Cotton eco 60°C are standard programmes.” These programmes are known as '40°C
cotton standard programme' and '60°C cotton standard programme' and shown on the panel
with symbols.
C
Water and power consumption may vary subject to the changes in water pressure, water hardness and
temperature, ambient temperature, type and amount of laundry, selection of auxiliary functions and spin speed,
and changes in electric voltage.
You can see the washing time of the programme you have selected on the display of the machine. It is normal that
small differences may occur between the time shown on the display and the real washing time.
The auxiliary functions in the table may vary according to the model of your machine.
“Selectability of auxiliary functions might be changed by the manufacturer. New selectabilities might be added or
existing ones might be removed.”
“The spin speed of your machine may vary among the programmes, however this speed cannot exceed the max.
spin speed of your machine.”
EN 2
Programme
Max. Load (kg) Water Consumption (l) Programme Duration (~min) Energy Consumption (kWh) Max. Speed*** Prelavaggio Rapido
Selectable
temperature
range °C
Cotone Eco
60** 7 53 211 0.95 1600 40-60
60** 3.5 43 185 0.62 1600 40-60
40** 3.5 43 187 0.60 1600 40-60
Cotone
90 7 69 165 2.15 1600 • • Cold-90
60 7 66 160 1.40 1600 • • Cold-90
40 7 66 160 0.70 1600 • • Cold-90
Sintetici 60 3 50 116 0.95 800 • • Cold-60
40 3 50 105 0.73 800 • • Cold-60
Xpress
90 7 55 88 1.80 1400 Cold-90
60 7 55 58 1.10 1400 Cold-90
30 7 55 28 0.25 1400 Cold-90
Super Short 30 2 50 14 0.11 1400 Cold-30
Camicie 60 3 48 104 0.34 600 • • Cold-60
Mix 40 40 3 50 115 0.73 800 • • Cold-40
Lavaggio a Mano 20° 20 1 41 43 0.15 600 20
Lana 40 1.5 56 60 0.27 600 Cold-40
BabyProtect 90 7 90 170 2.40 1600 • 30-90
Capi Scuri 40 3 70 107 0.50 800 Cold-40
Hygiene 20° 20 7 95 95 0.40 1600 20
Delicati 20° 20 3 45 45 0.15 600 20

14 / EN
Washing Machine / User’s Manual
4.10 Auxiliary function selection
Select the requred auxlary functons before startng
the program. Furthermore, you may also select or
cancel auxlary functons that are sutable to the
runnng programme wthout pressng the Start /
Pause button when the machne s operatng. For ths,
the machne must be n a step before the auxlary
functon you are gong to select or cancel.
If the auxlary functon cannot be selected or
canceled, lght of the relevant auxlary functon wll
blnk 3 tmes to warn the user.
C
Some functions cannot be selected together. For
example, Prewash and Quick Wash.
If a second auxiliary function conflicting with the
first one is selected before starting the machine,
the function selected first will be cancelled and the
second auxiliary function selection will remain active.
For example, if you want to select Quick Wash after
you have selected the Prewash, Prewash will be
cancelled and Quick Wash will remain active.
Auxiliary function that is not compatible with the
program cannot be selected. (See "Programme and
consumption table")
Auxiliary Function buttons may vary according to the
model of the machine.
• Prelavaggio (Prewash)
A Prewash s only worthwhle for heavly soled
laundry. Not usng the Prewash wll save energy,
water, detergent and tme.
C
Prewash without detergent is recommended for
tulle and curtains.
• Rapido (Quick Wash)
Ths functon can be used n Cottons and Synthetcs
programmes. It decreases the washng tmes for lghtly
soled laundres and also the number of rnsng steps.
C
When you select this function, load your machine
with half of the maximum laundry specified in the
programme table.
Delayed Start (In some models only)
Wth the Delayed Start functon the startup of the
programme may be delayed up to 3, 6 or 9 hours.
C
Do not use liquid detergents when you set Delayed
Start! There is the risk of staining of the clothes.
Open the loadng door, place the laundry and put
detergent, etc. Select the washng programme,
temperature, spn speed and, f requred, the auxlary
functons. Set the desred tme by pressng the
Delayed Start button. When the button s pressed
once, 3 hours delayed start s selected. When the same
button s pressed agan, 6 hours delay s selected, and
when t s pressed for the thrd tme, 9 hours delayed
start s selected. If you press the Delayed Start button
once agan, Delayed Start functon wll be canceled.
Press Start / Pause button. Prevous delayed start tme
lght turns off and next delayed start tme lght turns
on after every 3 hours. At the end of the countdown,
all delayed start lghts wll turn off and the selected
programme wll start.
C
Additional laundry may be loaded during the
delayed start period.
Changing the Delayed Start period
Press Delayed Start button. Every tme the button s
pressed, the perod wll change n 3-hour ncrements
and the lght of the selected delayed start tme wll
turn on.
Canceling the Delayed Start function
If you want to cancel the delayed start countdown and
start the programme mmedately:
Set the Delayed Start perod to zero (all delayed start
perod lghts wll turn off) or turn the Programme
Selecton knob to any programme. Thus, Delayed Start
functon wll be canceled. The End/Cancel lght flashes
contnuously. Then, select the programme you want
to run agan. Press Start / Pause button to start the
programme.
4.11 Startng the programme
Press Start / Pause button to start the programme.
Programme follow-up lght showng the startup of the
programme wll turn on.
C
If no programme is started or no key is pressed
within 1 minute during programme selection
process, the machine will switch to Pause mode
and the illumination level of the temperature,
speed and loading door indicator lights will
decrease. Other indicator lights and indicators will
turn off. Once the Programme Selection knob is
rotated or any button is pressed, indicator lights
and indicators will turn on again.
4.12 Chld Lock
Use chld lock functon to prevent chldren from
tamperng wth the machne. Thus you can avod any
changes n a runnng programme.
C
If the Programme Selection knob is turned when
the Child Lock is active, “Con” appears on the
display. The Child Lock does not allow any change
in the programmes and the selected temperature,
speed and auxiliary functions.
C
Even if another programme is selected with the
Programme Selection knob while the Child Lock
is active, previously selected programme will
continue running.
C
When the Child Lock is active and the machine
is running, you can switch the machine to Pause
mode without deactivating the Child Lock by
turning the Programme Selection knob to On / Off
position. When you turn the Programme Selection
knob afterwards, the programme will resu

15 / EN
Washing Machine / User’s Manual
To activate the Child Lock:
Press and hold 1st and 2nd Auxlary Functon buttons
for 3 seconds. The lghts on the 1st and 2nd Auxlary
Functon buttons wll flash whle you keep the buttons
pressed for 3 seconds.
To deactivate the Child Lock:
Press and hold 1st and 2nd auxlary functon buttons
for 3 seconds whle any programme s runnng. The
lghts on the 1st and 2nd Auxlary Functon buttons
wll flash whle you keep the buttons pressed for 3
seconds.
C
In addition to the method above, to deactivate
the Child Lock, switch the Programme Selection
knob to On / Off position when no programme is
running, and select another programme.
C
When the power is restored after a power failure
or after your machine is unplugged and plugged in
again, the Child Lock will not be deactivated when
the machine resumes operating.
4.13 Progress of programme
Progress of a runnng programme can be followed
from the Programme Follow-up ndcator. At the
begnnng of every programme step, the relevant
ndcator lght wll turn on and lght of the completed
step wll turn off.
You can change the auxlary functons, speed
and temperature settngs wthout stoppng the
programme flow whle the programme s runnng. To
do ths, the change you are gong to make must be n a
step after the runnng programme step. If the change
s not compatble, relevant lghts wll flash for 3 tmes.
C
If the machine does not pass to the spinning
step, Rinse Hold function might be active or the
automatic unbalanced load detection system might
be activated due to the unbalanced distribution of
the laundry in the machine.
4.14 Loadng door lock
There s a lockng system on the loadng door of the
machne that prevents openng of the door n cases
when the water level s unsutable.
Loadng door lght wll start flashng when the machne
s swtched to Pause mode. Machne checks the level
of the water nsde. If the level s sutable, Loadng
Door lght llumnates steadly wthn 1-2 mnutes and
the loadng door can be opened.
If the level s unsutable, Loadng Door lght turns off
and the loadng door cannot be opened. If you are
oblged to open the Loadng Door whle the Loadng
Door lght s off, you have to cancel the current
programme; see “Cancelng the programme”.
Changng the selectons after programme
has started
Switching the machine to pause mode
Press the Start / Pause button to swtch the machne
to pause mode whle a programme s runnng. The lght
of the step whch the machne s n starts flashng n
the Programme Follow-up ndcator to show that the
machne has been swtched to the pause mode.
Also, when the loadng door s ready to be opened,
Loadng Door lght wll also llumnate contnuously n
addton to the programme step lght.
Changing the speed and temperature settings for
auxiliary functions
Dependng on the step the programme has reached,
you may cancel or actvate the auxlary functons; see,
“Auxlary functon selecton”.
You may also change the speed and temperature
settngs; see, “Spn speed selecton” and “Temperature
selecton”.
C
If no change is allowed, the relevant light will flash
for 3 times.
4.15 Addng or takng out laundry
Press the Start / Pause button to swtch the machne
to pause mode. The programme follow-up lght of the
relevant step durng whch the machne was swtched
nto the pause mode wll flash. Wat untl the Loadng
Door can be opened. Open the Loadng Door and add
or take out the laundry. Close the Loadng Door. Make
changes n auxlary functons, temperature and speed
settngs f necessary. Press Start / Pause button to
start the machne.
4.16 Cancelng the programme
To cancel the programme, turn the Programme
Selecton knob to select another programme. Prevous
programme wll be canceled. End / Cancel lght wll
flash contnuously to notfy that the programme has
been canceled.
Your machne wll end the programme when you turn
the Programme Selecton knob; however, t does not
dran the water nsde. When you select and start a
new programme, the newly selected programme wll
start dependng on the step the prevous programme
was canceled n. For example, t may take n addtonal
water or contnue to wash wth the water nsde.
C
Depending on the step where the programme
was canceled in, you may have to put detergent
and softener again for the programme you have
selected anew.
4.17 Your machne s equpped wth a
“Standby Mode”
In case of not startng any programme or watng
wthout makng any other operaton when the
machne s turned on by On/Off button and whle t s
n selecton step or f no other operaton s performed
approxmately 2 mnutes after the programme you
selected has come to an end, your machne wll
automatcally swtch to energy savng mode. Dsplay
brghtness wll decrease. In case of rotatng the
Programme Selecton knob or pressng any button,
lghts wll restore to ther prevous condton. Ths s
not a fault.

16 / EN
Washing Machine / User’s Manual
5 Maintenance and cleaning
Service life of the product extends and frequently
faced problems decrease if cleaned at regular intervals.
5.1 Cleaning the detergent drawer
Clean the detergent drawer at regular intervals (every
4-5 washing cycles) as shown below in order to
prevent accumulation of powder detergent in time.
Lft the rear part of the sphon to remove t as
llustrated.
C
If more than normal amount of water and
softener mixture starts to gather in the softener
compartment, clean the siphon.
2 Wash the detergent drawer and the siphon with
plenty of lukewarm water in a washbasin. Wear
protective gloves or use an appropriate brush to
avoid touching of the residues in the drawer with
your skin when cleaning.
3 After cleaning, replace the siphon back to its seating
and push its front section downwards to make sure
that the locking tab engages.
5.2 Cleaning the loading door and the drum
For products with drum cleaning programme, please
see Operating the product - Programmes.
For products without drum cleaning, follow the below
steps to clean the drum:
Select Additional Water or Extra Rinse auxiliary
functions. Use a Cottons programme without
pre-wash. Set the temperature to the level
recommended on the drum cleaning agent which
can be provided from authorized services. Apply
this procedure without any laundry in the product.
Before starting the programme, put 1 pouch of special
drum cleaning agent (if the special agent could not be
supplied, put max. 100 g of powder anti-limescale) into
the main wash detergent compartment (compartment
no. “2”). If the anti-limescale is in tablet form, put only
one tablet into the main wash compartment no. “2”.
Dry the inside of the bellow with a clean piece of cloth
after the programme has come to an end.
C
Repeat Drum Cleaning process in every 2 months.
Use an anti-limescale suitable for the washing
machines.
After every washing check that no foreign substance is
left in the drum.
If the holes on the bellow shown in the figure is
blocked, open the holes using a toothpick.
C
Foreign metal substances will cause rust stains in
the drum. Clean the stains on the drum surface by
using cleaning agents for stainless steel. Never use
steel wool or wire wool.
A
WARNING: Never use sponge or scrub materials.
These will damage the painted and plastic
surfaces.
5.3 Cleaning the body and control panel
Wipe the body of the machine with soapy water or
non-corrosive mild gel detergents as necessary, and
dry with a soft cloth.
Use only a soft and damp cloth to clean the control
panel.

17 / EN
Washing Machine / User’s Manual
5.4 Cleaning the water intake filters
There is a filter at the end of each water intake valve
at the rear of the machine and also at the end of each
water intake hose where they are connected to the
tap. These filters prevent foreign substances and dirt
in the water to enter the washing machine. Filters
should be cleaned as they do get dirty.
1 Close the taps.
2 Remove the nuts of the water intake hoses to
access the filters on the water intake valves. Clean
them with an appropriate brush. If the filters are too
dirty, take them out by means of pliers and clean
them.
3 Take out the filters on the flat ends of the water
intake hoses together with the gaskets and clean
thoroughly under running water.
4 Replace the gaskets and filters carefully in their
places and tighten the hose nuts by hand.
5.5 Draining remaining water and cleaning
the pump filter
The filter system in your machine prevents solid items
such as buttons, coins and fabric fibers clogging the
pump impeller during discharge of washing water.
Thus, the water will be discharged without any
problem and the service life of the pump will extend.
If the machine fails to drain water, the pump filter is
clogged. Filter must be cleaned whenever it is clogged
or in every 3 months. Water must be drained off first to
clean the pump filter.
In addition, prior to transporting the machine (e.g.,
when moving to another house) and in case of freezing
of the water, water may have to be drained completely.
A
WARNING: Foreign substances left in the pump
filter may damage your machine or may cause
noise problem.
WARNING: If the product is not in use, turn the
tap off, detach the supply hose and drain the
water inside the machine against any freezing
possibility in the region of installation.
WARNING: After each use close the supply hose
tap of the product.
In order to clean the dirty filter and discharge the
water:
1 Unplug the machine to cut off the supply power.
A
WARNING: Temperature of the water inside the
machine may rise up to 90 ºC. To avoid burning
risk, clean the filter after the water in the machine
cools down.
2 Open the filter cap.
3 Some of our products have emergency draining
hose and some does not have. Follow the steps
below to discharge the water.
Discharging the water when the product has an
emergency draining hose:
a Pull the emergency draining hose out from its seat
b Place a large container at the end of the hose. Drain
the water into the container by pulling out the
plug at the end of the hose. When the container
is full, block the inlet of the hose by replacing the
plug. After the container is emptied, repeat the
above procedure to drain the water in the machine
completely.
c When dranng of water s fnshed, close the end by
the plug agan and fx the hose n ts place.
d Turn the pump filter to take it out.

18 / EN
Washing Machine / User’s Manual
Indcatve values for Synthetcs programmes (EN)
Load (kg) Water Consumpton (l) Energy Consumpton (kWh) Programme Duraton (mn) *
Remanng Mosture
Content (%) **
Remanng Mosture
Content (%) **
≤ 1000 rpm > 1000 rpm
Synthetcs 60 350 0.95 01:56 45 40
Synthetcs 40 350 0.73 01:45 45 40
* You can see the washng tme of the programme you have selected on the dsplay of the machne. It s normal that small
dfferences may occur between the tme shown on the dsplay and the real washng tme.
** Remanng mosture content values may dffer accordng to the selected spn speed.
Discharging the water when the product does not
have an emergency draining hose:
a Place a large container in front of the filter to catch
water from the filter.
b Loosen pump filter (anticlockwise) until water starts
to flow. Fill the flowing water into the container you
have placed in front of the filter. Always keep a piece
of cloth handy to absorb any spilled water.
c When the water inside the machine is finished, take
out the filter completely by turning it.
4 Clean any residues inside the filter as well as fibers,
if any, around the pump impeller region.
5 Install the filter.
6 If the filter cap is composed of two pieces, close the
filter cap by pressing on the tab. If it is one piece,
seat the tabs in the lower part into their places first,
and then press the upper part to close.

19 / EN
Washing Machine / User’s Manual
6 Technical specifications
Complying Commission Delegated Regulation (EU) No 1061/2010
Supplier name or trademark Beko
Model name WMY 71023 LMB3
Rated capacity (kg) 7
Energy efficiency class / Scale from A+++ (Highest Efficiency) to D (Lowest Efficiency) A+++
Annual Energy Consumption (kWh) (1) 171
Energy consumption of the standard 60°C cotton programme at full load (kWh) 0.950
Energy consumption of the standard 60°C cotton programme at partial load (kWh) 0.620
Energy consumption of the standard 40°C cotton programme at partial load (kWh) 0.600
Power consumption in ‘off-mode’ (W) 0.250
Power consumption in ‘left-on mode’ (W) 1.000
Annual Water Consumption (l) (2) 10560
Spin-drying efficiency class / Scale from A (Highest Efficiency) to G (Lowest Efficiency) C
Maximum spin speed (rpm) 1000
Remaining moisture Content (%) 62
Standard cotton programme (3) Cotton Eco 60°C and 40°C
Programme time of the standard 60°C cotton programme at full load (min) 211
Programme time of the standard 60°C cotton programme at partial load (min) 185
Programme time of the standard 40°C cotton programme at partial load (min) 187
Duration of the left-on mode (min) N/A
Airborne acoustical noise emissions washing/spinning (dB) 60/75
Built-in No
Height (cm) 84
Width (cm) 60
Depth (cm) 50
Net weight (±4 kg.) 67
Single Water inlet / Double Water inlet • / -
• Available
Electrical input (V/Hz) 230 V / 50Hz
Total current (A) 10
Total power (W) 2200
Main model code 9210
(1) Energy Consumption based on 220 standard washing cycles for cotton programmes at 60°C and 40°C at full and partial load, and the consumption
of the low-power modes. Actual energy consumption will depend on how the appliance is used.
(2) Water consumption based on 220 standard washing cycles for cotton programmes at 60°C and 40°C at full and partial load. Actual water
consumption will depend on how the appliance is used.
(3) “Standard 60°C cotton programme” and the “standard 40°C cotton programme” are the standard washing programmes to which the information
in the label and the fiche relates and these programmes are suitable to clean normally soiled cotton laundry and that they are the most efficient
programmes in terms of combined energy and water consumption.
Technical specifications may be changed without prior notice to improve the quality of the product.

20 / EN
Washing Machine / User’s Manual
7 Troubleshooting
Program does not start after closing the door.
•Start / Pause / Cancel button was not pressed. >>> *Press the Start / Pause / Cancel button.
Programme cannot be started or selected.
• Washing machine has switched to self protection mode due to a supply problem (line voltage, water pressure, etc.). >>>
To cancel the programme, turn the Programme Selection knob to select another programme. Previous programme will be
cancelled. (See “Canceling the programme”)
Water in the machine.
• Some water might have remained in the product due to the quality control processes in the production. >>> This is not a failure;
water is not harmful to the machine.
Machine vibrates or makes noise.
• Machine might be standing unbalanced. >>> Adjust the feet to level the machine.
• A hard substance might have entered into the pump filter. >>> Clean the pump filter.
• Transportation safety bolts are not removed. >>> Remove the transportation safety bolts.
• Laundry quantity in the machine might be too little. >>> Add more laundry to the machine.
• Machine might be overloaded with laundry. >>> Take out some of the laundry from the machine or distribute the load by hand
to balance it homogenously in the machine.
• Machine might be leaning on a rigid item. >>> Make sure that the machine is not leaning on anything.
Machine stopped shortly after the programme started.
• Machine might have stopped temporarily due to low voltage. >>> It will resume running when the voltage restores to the
normal level.
Programme time does not countdown. (On models with display)
• Timer may stop during water intake. >>> Timer indicator will not countdown until the machine takes in adequate amount of
water. The machine will wait until there is sufficient amount of water to avoid poor washing results due to lack of water. Timer
indicator will resume countdown after this.
• Timer may stop during heating step. >>> Timer indicator will not countdown until the machine reaches the selected
temperature.
• Timer may stop during spinning step. >>> Automatic unbalanced load detection system might be activated due to the
unbalanced distribution of the laundry in the drum.
• Machine does not switch to spinning step when the laundry is not evenly distributed in the drum to prevent any damage to the
machine and to its surrounding environment. Laundry should be rearranged and re-spun.
Foam is overflowing from the detergent drawer.
• Too much detergent is used. >>> Mix 1 tablespoonful softener and ½ l water and pour into the main wash compartment of the
detergent drawer.
• Put detergent into the machine suitable for the programmes and maximum loads indicated in the “Programme and consumption
table”. When you use additional chemicals (stain removers, bleachs and etc), reduce the amount of detergent.
Laundry remains wet at the end of the programme
• Excessive foam might have occurred and automatic foam absorption system might have been activated due to too much
detergent usage. >>> Use recommended amount of detergent.
• Machine does not switch to spinning step when the laundry is not evenly distributed in the drum to prevent any damage to the
machine and to its surrounding environment. Laundry should be rearranged and re-spun.
A
warning: If you cannot eliminate the problem although you follow the instructions in this section, consult your dealer
or the Authorized Service Agent. Never try to repair a nonfunctional product yourself.