Beko WMY 71441PTL User manual

2820524935/15-08-15.(14:43)Document Number=
Washing Machine
User Manual
WMY 71441PTL
EN

Please read this user manual first!
Dear Customer,
Thank you for prefering a Beko product. We hope that you get the best results from your product which
has been manufactured with high quality and state-of-the-art technology. Therefore, please read this
entire user manual and all other accompanying documents carefully before using the product and keep it
as a reference for future use. If you handover the product to someone else, give the user manual as well.
Follow all warnings and information in the user manual.
Remember that this user manual is also applicable for several other models. Differences between models
will be identified in the manual.
Explanation of symbols
Throughout this user manual the following symbols are used:
CImportant information or useful hints
about usage.
AWarning for hazardous situations with
regard to life and property.
BWarning for electric shock.
Packaging materials of the product
are manufactured from recyclable
materials in accordance with our National
Environment Regulations.
Do not dispose of the packaging materials together with the domestic or other wastes. Take them to the
packaging material collection points designated by the local authorities.
This product was manufactured using the latest technology in environmentally friendly conditions.

Washing Machine / User’s Manual 3/ EN
TABLE OF CONTENTS
1 Important instructions for safety and
environment 4
1.1 General safety . . . . . . . . . . . . . . . . . . . . . . . 4
1.1.1 Electrical safety 4
1.1.2 Product safety 5
1.2 Intended use . . . . . . . . . . . . . . . . . . . . . . . .5
1.3 Children's safety. . . . . . . . . . . . . . . . . . . . . .5
1.4 Package information. . . . . . . . . . . . . . . . . . .6
1.5 Disposing of the waste product . . . . . . . . . . .6
1.6 Compliance with WEEE Directive . . . . . . . . . .6
2 Your washing machine 7
2.1 Technical specifications . . . . . . . . . . . . . . . .7
2.2 Overview . . . . . . . . . . . . . . . . . . . . . . . . . . .8
2.3 Package Contents . . . . . . . . . . . . . . . . . . . .9
3 Installation 10
3.1 Appropriate installation location. . . . . . . . . .10
3.2 Removing packaging reinforcement . . . . . .10
3.3 Removing the transportation locks. . . . . . . .10
3.4 Connecting water supply. . . . . . . . . . . . . . .11
3.5 Connecting to the drain. . . . . . . . . . . . . . . .11
3.6 Adjusting the feet . . . . . . . . . . . . . . . . . . . .12
3.7 Electrical connection. . . . . . . . . . . . . . . . . .12
3.8 Initial use . . . . . . . . . . . . . . . . . . . . . . . . . .12
4 Preparation 13
4.1 Washing symbols . . . . . . . . . . . . . . . . . . . .13
4.2 Sorting the laundry . . . . . . . . . . . . . . . . . . .14
4.3 Preparing laundry for washing. . . . . . . . . . .14
4.4 Things to be done for energy saving . . . . . .14
4.5 Initial use . . . . . . . . . . . . . . . . . . . . . . . . . .14
4.6 Correct load capacity . . . . . . . . . . . . . . . . .15
4.7 Loading the laundry . . . . . . . . . . . . . . . . . .15
4.8 Using detergent and softener . . . . . . . . . . .15
5 Operating the product 18
5.1 Control panel . . . . . . . . . . . . . . . . . . . . . . .18
5.2 Display symbols . . . . . . . . . . . . . . . . . . . . .18
5.3 Programme selection . . . . . . . . . . . . . . . . .19
5.3.1 Programs . . . . . . . . . . . . . . . . . . . . . . . . 19
5.4 Temperature selection. . . . . . . . . . . . . . . . .20
5.5 Spin speed selection. . . . . . . . . . . . . . . . . .21
5.6 Programme and consumption table. . . . . . .22
5.7 Auxiliary function selection . . . . . . . . . . . . .23
5.8 End Time . . . . . . . . . . . . . . . . . . . . . . . . . .24
5.9 Starting the programme . . . . . . . . . . . . . . .24
5.10 Loading door lock. . . . . . . . . . . . . . . . . . .24
5.11 Changing the selections after the programme
has started . . . . . . . . . . . . . . . . . . . . . . .25
5.12 Child Lock . . . . . . . . . . . . . . . . . . . . . . . .25
5.13 Canceling the programme. . . . . . . . . . . . .26
5.14 End of programme . . . . . . . . . . . . . . . . . .26
5.15 Adjusting the VOLUME level . . . . . . . . . . .26
5.16 Your machine is equipped with a “Standby
Mode”. . . . . . . . . . . . . . . . . . . . . . . . . . .26
6 Maintenance and cleaning 27
6.1 Cleaning the detergent drawer . . . . . . . . . .27
6.2 Cleaning the loading door and the drum . . .27
6.3 Cleaning the body and control panel . . . . . .27
6.4 Cleaning the water intake filters . . . . . . . . .28
6.5 Draining remaining water and cleaning the
pump filter. . . . . . . . . . . . . . . . . . . . . . . .28
7 Troubleshooting 30

4/ EN Washing Machine / User’s Manual
1 Important instructions for safety and environment
This section includes security instructions which may help prevent the injuries
and material damage risks. All kinds of warranties shall be invalid if these
instructions are not observed.
1.1 General safety
uThis product can be used by the children who are at the age of 8 and over and
the people whose physical, sensory or mental skills are not fully developed or
who do not have necessary required experience and knowledge as long as
they are supervised or trained about the safe use of the product and its risks.
Children should not play with the device. Cleaning and maintenance works
should not be performed by children unless they are supervised by someone.
u Never place the product on a carpet-covered floor. Electrical parts will get
overheated since air cannot circulate from under the device. This will cause
problems with your product.
uAlways have the installation and repairing procedures carried out by the
Authorized Service Agent. Manufacturer shall not be held liable for damages
that may arise from procedures carried out by unauthorized persons.
1.1.1 Electrical safety
uIf the product has a failure, it should not be operated unless it is repaired by
the Authorized Service Agent. Risk of electric shock!
uThis product is designed to resume operating in the event of powering on after
a power interruption. If you wish to cancel the programme, see "Cancelling the
programme" section.
uPlug the product into a grounded outlet protected by a 16 A fuse. Do not
neglect to have the grounding installation made by a qualified electrician. Our
company shall not be liable for any damages that will arise when the product
is used without grounding in accordance with the local regulations.
u Unplug the product if it is not in use.
u Do not wash the product by spraying or pouring water onto it! Risk of electric
shock!
uNever touch the power cable plug with wet hands! Do not grab the power cord
to unplug the machine, always unplug it by holding the socket with one hand,
and pulling the plug with the other hand.
u Product should be unplugged during installation, maintenance, cleaning and
repair procedures.
u If the power cable is damaged, it must be replaced by the manufacturer,
after sales service or a similarly qualified person (preferably an electrician) or
someone designated by the importer in order to avoid possible risks.

Washing Machine / User’s Manual 5/ EN
Important instructions for safety and environment
1.1.2 Product safety
uThe water supply and draining hoses must be securely fastened and remain
undamaged. Otherwise, water leak may occur.
uWhile there is still water inside the product, never open the loading door or
remove the filter. Otherwise, risk of flooding and injury from hot water will
occur.
uDo not force open the locked loading door. Door can be opened a few minutes
after the washing cycle ends. In case of forcing the loading door to open, the
door and the lock mechanism may get damaged.
uUse detergents, softeners and supplements suitable for automatic washing
machines only.
u Follow the instructions on the label of textiles and the detergent package.
1.2 Intended use
uThis product is for domestic use only. It is not for commercial purposes or it
should not be used out of its intended use.
uThe product must only be used for washing and rinsing of laundry that are
marked accordingly.
uThe manufacturer waives any responsibility arisen from incorrect usage or
transportation.
u The service life of the product you purchased is 10 years. During this period,
original spare parts will be available to operate the appliance properly.
1.3 Children's safety
uPackaging materials may be dangerous for the children. Keep packaging
materials in a safe place away from reach of the children.
uElectrical products are dangerous for the children. Keep the children away
from the product when it is in use. Do not allow them to play with the product.
Use child lock to prevent children from intervening with the product.
uDo not forget to close the loading door when leaving the room where the
product is located.
ustore all detergents and additives in a safe place away from the reach of
the children by closing the cover of the detergent container or sealing the
detergent package.
While washing the laundry at high temperatures, the
loading door glass will get hot. Considering this fact,
during washing operation keep the children away
from the loading door of the product to prevent them
touching it.

6/ EN Washing Machine / User’s Manual
Important instructions for safety and environment
1.4 Package information
uPackaging materials of the product are manufactured from recyclable
materials in accordance with our National Environment Regulations. Do not
dispose of the packaging materials together with the domestic or other wastes.
Take them to the packaging material collection points designated by the local
authorities.
1.5 Disposing of the waste product
uThis product has been manufactured with high quality parts and materials
which can be reused and are suitable for recycling. Therefore, do not dispose
the product with normal domestic waste at the end of its service life. Take it
to a collection point for the recycling of electrical and electronic equipment.
Please consult your local authorities to learn the nearest collection point. Help
protect the environment and natural resources by recycling used products. For
children’s safety, cut the power cable and break the locking mechanism of the
loading door so that it will be non-functional before disposing of the product.
1.6 Compliance with WEEE Directive
This product complies with EU WEEE Directive (2012/19/EU).
This product bears a classification symbol for waste electrical
and electronic equipment (WEEE).
This product has been manufactured with high quality parts
and materials which can be reused and are suitable for
recycling. Do not dispose of the waste product with normal
domestic and other wastes at the end of its service life. Take
it to the collection center for the recycling of electrical and
electronic equipment. Please consult your local authorities to
learn about these collection centers.
Compliance with RoHS Directive:
The product you have purchased complies with EU RoHS Directive (2011/65/EU).
It does not contain harmful and prohibited materials specified in the Directive.

Washing Machine / User’s Manual 7/ EN
2 Your washing machine
2.1 Technical specifications
Supplier name or trademark Beko
Model name WMY 71441 PTL
Rated capacity (kg) 7
Energy efficiency class / Scale from A+++ (Highest Efficiency) to D (Lowest Efficiency) Class 1
Maximum spin speed (rpm) 1400
Rated capacity (kg) 7
Height (cm) 84
Width (cm) 60
Depth (cm)54
Net weight (±4 kg.) 71
Single Water inlet / Double Water inlet
• / -
• Available
Electrical input (V/Hz) 220 V / 50Hz
Total current (A) 10
Total power (W) 2000
Main model code 9711

8/ EN Washing Machine / User’s Manual
Your washing machine
2.2 Overview
1
2
3
4
5
6
7
8
1- Power cable
2- Top panel
3- Control panel
4- Drain hose
5- Loading door
6- Filter cap
7- Adjustable feet
8- Detergent drawer

Washing Machine / User’s Manual 9/ EN
Your washing machine
2.3 Package Contents
1
2
3 4
abc
5
6
7
8
1- Power cable
2- Drain hose
3- Transportation safety bolts *
4- Mains water inlet hose (One of the following filter types is used for the mains hose connection.)
a- Electronical water shut-off
b- Mechanical water shut-off
c- Standard
5- Liquid detergent container**
6- User Manual
7- Blind plug***
8- Plastic plug group
* Number of transportation safety bolts may change depending on the model of your machine.
** This may be supplied with the machine depending on the model of your machine.
*** This is supplied if your machine is equipped with double water inlet.
CFigures in this manual are schematic and may not match the product exactly.

10 / EN Washing Machine / User’s Manual
3 Installation
Apply to the nearest authorized service agent
for the installation of your product. To make the
product ready for use, review the information in
the user manual and make sure that the electricity,
tap water supply and water drainage systems are
appropriate before calling the Authorized Service
Agent. If they are not, call a qualified technician
and plumber to have any necessary arrangements
carried out.
CPreparation of the location and electrical,
tap water and waste water installations at
the place of installation is under customer's
responsibility.
Make sure that the water inlet and
discharge hoses as well as the power cable
are not folded, pinched or crushed while
pushing the product into its place after
installation or cleaning procedures.
BCAUTION:Make sure that the installation
and electrical connections of the product
are performed by authorized service.
Manufacturer shall not be held liable for
damages that may arise from procedures
carried out by unauthorized persons.
ACAUTION:Prior to installation, visually
check if the product has any defects on
it. If so, do not have it installed. Damaged
products cause risks for your safety.
3.1 Appropriate installation location
• Place the product on a hard and level floor. Do
not put it onto a carpet with high pile or other
similar surfaces.
• When the washing machine and drier are placed
on top of each other, their total weight –when
loaded– amounts to 180 kilograms. Place
the product on a solid and flat floor that has
sufficient load carrying capacity!
• Do not place the product on the power cable.
• Do not install the product in the environments
where the temperature falls below 0 ºC.
• Leave a minimum space of 1 cm between the
machine and the furniture.
• On a graduated floor, do not place the product
next to the edge or on a platform.
3.2 Removing packaging
reinforcement
Tilt the machine backwards to remove the
packaging reinforcement. Remove the packaging
reinforcement by pulling the ribbon.
3.3 Removing the transportation locks
ACAUTION: Do not remove the transport
safety bolts before removing the
packaging support.
CAUTION: Remove the transportation
safety bolts before operating the washing
machine! Otherwise, the product will be
damaged.
1 Loose all bolts with an appropriate wrench until
they turn freely (C).
2 Remove the transport safety bolts by turning
them slightly.
3 Insert the plastic covers in the bag containing
the user manual to the openings on the rear
panel. (P)
CKeep the transportation safety bolts in
a safe place to reuse when the washing
machine needs to be moved again in the
future.
Install the transport safety bolts in reverse
order of the disassembly procedure.
Never move the product without the
transportation safety bolts properly fixed in
place!