
16 / EN Washing Machine / User’s Manual
To deactivate the Child Lock:
Pressandhold1stand2ndauxiliaryfunctionbuttonsfor3
seconds while any programme is running. The lights on the
1stand2ndAuxiliaryFunctionbuttonswillflash,and"C03",
"C02","C01"willappearonthedisplayrespectivelywhile
youkeepthebuttonspressedfor3seconds.Then,"COFF"
willappearonthedisplayindicatingthattheChildLockis
deactivated.
CInadditiontothemethodabove,todeactivatetheChild
Lock,switchtheProgrammeSelectionknobtoOn/
Offpositionwhennoprogrammeisrunning,andselect
another programme.
ChildLockisnotdeactivatedafterpowerfailuresor
when the machine is unplugged.
4.13 Progress of programme
Progressofarunningprogrammecanbefollowedfromthe
ProgrammeFollow-upindicator.Atthebeginningofevery
programme step, the relevant indicator light will turn on and
light of the completed step will turn off.
You can change the auxiliary functions, speed and
temperature settings without stopping the programme flow
while the programme is running. To do this, the change
youaregoingtomakemustbeinastepaftertherunning
programmestep.Ifthechangeisnotcompatible,relevant
lights will flash for 3 times.
CIfthemachinedoesnotpasstothespinningstep,Rinse
Holdfunctionmightbeactiveortheautomaticunbalanced
loaddetectionsystemmightbeactivatedduetothe
unbalanceddistributionofthelaundryinthemachine.
4.14 Loading door lock
There is a locking system on the loading door of the
machine that prevents opening of the door in cases when
thewaterlevelisunsuitable.
Loadingdoorlightwillstartflashingwhenthemachine
isswitchedtoPausemode.Machinechecksthelevelof
thewaterinside.Ifthelevelissuitable,LoadingDoorlight
illuminatessteadilywithin1-2minutesandtheloadingdoor
canbeopened.
Ifthelevelisunsuitable,LoadingDoorlightturnsoffandthe
loadingdoorcannotbeopened.Ifyouareobligedtoopen
theLoadingDoorwhiletheLoadingDoorlightisoff,you
havetocancelthecurrentprogramme;see"Cancelingthe
programme".
4.15 Changing the selections after
programme has started
Switching the machine to pause mode
PresstheStart/Pausebuttontoswitchthemachineto
pause mode while a programme is running. The light of
the step which the machine is in starts flashing in the
ProgrammeFollow-upindicatortoshowthatthemachine
hasbeenswitchedtothepausemode.
Also,whentheloadingdoorisreadytobeopened,Loading
Doorlightwillalsoilluminatecontinuouslyinadditiontothe
programme step light.
Changing the speed and temperature settings for
auxiliary functions
Dependingonthesteptheprogrammehasreached,you
maycanceloractivatetheauxiliaryfunctions;see,"Auxiliary
functionselection".
You may also change the speed and temperature settings;
see,"Spinspeedselection"and"Temperatureselection".
CIfnochangeisallowed,therelevantlightwillflashfor
3 times.
Adding or taking out laundry
PresstheStart/Pausebuttontoswitchthemachineto
pause mode. The programme follow-up light of the relevant
step during which the machine was switched into the pause
modewillflash.WaituntiltheLoadingDoorcanbeopened.
OpentheLoadingDoorandaddortakeoutthelaundry.
ClosetheLoadingDoor.Makechangesinauxiliaryfunctions,
temperatureandspeedsettingsifnecessary.PressStart/
Pausebuttontostartthemachine.
4.16 Canceling the programme
Tocanceltheprogramme,turntheProgrammeSelection
knobtoselectanotherprogramme.Previousprogramme
willbecanceled.End/Cancellightwillflashcontinuouslyto
notifythattheprogrammehasbeencanceled.
Pumpfunctionisactivatedfor1-2minutesregardlessofthe
programme step, and whether there is water in the machine
ornot.Afterthisperiod,yourmachinewillbereadytostart
with the first step of the new programme.
CDependingonthestepwheretheprogrammewas
canceled in, you may have to put detergent and
softener again for the programme you have selected
anew.
4.17 End of programme
“End”appearsonthedisplayattheendoftheprogramme.
Waituntiltheloadingdoorlightilluminatessteadily.PressOn
/Offbuttontoswitchoffthemachine.Takeoutyourlaundry
and close the loading door. Your machine is ready for the
next washing cycle.
4.18 Your machine is equipped
with a “Standby Mode”
Incaseofnotstartinganyprogrammeorwaitingwithout
making any other operation when the machine is turned
onbyOn/Offbuttonandwhileitisinselectionsteporif
nootheroperationisperformedapproximately2minutes
after the programme you selected has come to an end,
your machine will automatically switch to energy saving
mode.Brightnessofindicatorlightswilldecrease.Also,
ifyourproductisequippedwithadisplayshowingthe
programmeduration,thisdisplaywillcompletelyturnoff.In
caseofrotatingtheProgrammeSelectionknoborpressing
anybutton,lightsanddisplaywillrestoretotheirprevious
condition. Your selections made while exiting the energy
savingmodemaychange.Checktheappropriatenessof
yourselectionsbeforestartingtheprogramme.Readjustif
necessary. This is not a fault.