Belden Lumberg Automation 0980 XSL... User manual

Manual
CC-Link IE Field Basic
LioN-X Digital-I/O Multiprotocol:
0980 XSL 3900-121-007D-01F (16 x Input/Output)
0980 XSL 3901-121-007D-01F (16 x Input)
0980 XSL 3903-121-007D-01F (8 x Input, 8 x Output isolated)
0980 XSL 3923-121-007D-01F (8 x Input, 8 x Output)
Manual CC-Link IE Field Basic
Version 1.0 03/2023
Technical Support
lumberg-automation-support.belden.com

Contents
Contents
1 About this manual 7
1.1 General information 7
1.2 Explanation of symbols 8
1.2.1 Use of danger information 8
1.2.2 Use of general information 8
1.3 Version information 8
2 Safety instructions 9
2.1 Intended use 9
2.2 Qualified personnel 10
3 Designations and synonyms 11
4 System description 14
4.1 Device variants 15
4.2 I/O port overview 16
5 Overview of product features 20
5.1 CC-Link IE Field Basic product features 20
5.2 Integrated Web server 21
5.3 Security features 22
5.4 Other features 23
Manual CC-Link IE Field Basic
Version 1.0 03/2023
ii

Contents
6 Assembly and wiring 24
6.1 General information 24
6.2 Outer dimensions 25
6.2.1 LioN-X Digital-I/O multiprotocol variants 25
6.2.2 Notifications 29
6.3 Port assignments 30
6.3.1 Ethernet ports, M12 socket, 4-pin, D-coded 30
6.3.2 Power supply with M12 power L-coded 31
6.3.3 I/O ports as M12 sockets 32
6.3.3.1 I/O ports 33
7 Starting operation 34
7.1 CSP+ file 34
7.2 MAC addresses 34
7.3 State on delivery 35
7.4 Setting the rotary encoding switches 36
7.4.1 CC-Link IE Field Basic 39
7.4.2 Factory reset 39
7.5 Setting network parameters 40
8 Configuration CC-Link IE Field Basic 41
8.1 General settings 42
8.1.1 Report UL supply voltage fault 43
8.1.2 Report actuator fault without UL/UAUX voltage 43
8.1.3 Report US voltage fault 43
8.1.4 Force mode lock 43
8.1.5 Web interface lock 43
8.1.6 External configuration lock 43
8.2 Port configuration X1 .. X8 44
8.2.1 Surveillance Timeout 45
Manual CC-Link IE Field Basic
Version 1.0 03/2023
iii

Contents
8.2.2 Failsafe Mode 45
8.2.3 Channel Direction 45
8.2.4 Current Limit 46
8.2.5 Output Auto Restart 46
8.2.6 Digital Input Logic 47
8.2.7 Digital Input Filter 47
9 Process data assignment 48
9.1 Consuming data (output) 49
9.2 Producing data (input) 50
10 Diagnostics processing 51
10.1 Error of the system/sensor power supply 51
10.2 Error of the auxiliary/actuator power supply 52
10.3 Overload/short circuit of the digital outputs 52
10.4 Overload/short-circuit of the I/O port sensor supply outputs 54
11 Configuration and operation with
GxWorks3®55
11.1 Integration of a CSP+ file 55
11.2 Network parameters 56
11.3 Parameter processing 58
12 IIoT functionality 61
12.1 MQTT 62
12.1.1 MQTT configuration 62
12.1.2 MQTT topics 65
12.1.2.1 Base topic 65
12.1.2.2 Publish topic 68
Manual CC-Link IE Field Basic
Version 1.0 03/2023
iv

Contents
12.1.2.3 Command topic (MQTT Subscribe) 76
12.1.3 MQTT configuration - Quick start guide 80
12.1.3.1 MQTT configuration via JSON 80
12.2 OPC UA 82
12.2.1 OPC UA configuration 82
12.2.1.1 Gateway objects 85
12.2.1.2 Ports objects 88
12.2.1.3 Channel objects 89
12.2.2 OPC UA address space 91
12.2.3 OPC UA configuration - Quick start guide 92
12.2.3.1 OPC UA configuration via JSON 92
12.3 REST API 94
12.3.1 Standard device information 94
12.3.2 Structure 95
12.3.3 Configuration and forcing 99
12.4 CoAP server 101
12.4.1 CoAP configuration 101
12.4.2 REST API access via CoAP 102
12.4.3 CoAP configuration - Quick start guide 104
12.4.3.1 CoAP configuration via JSON 104
12.5 Syslog 106
12.5.1 Syslog configuration 106
12.5.2 Syslog configuration - Quick start guide 109
12.5.2.1 Syslog configuration via JSON 109
12.6 Network Time Protocol (NTP) 111
12.6.1 NTP configuration 111
12.6.2 NTP configuration - Quick start guide 113
12.6.2.1 NTP configuration via JSON 113
13 The integrated Web server 115
13.1 LioN-X 0980 XSL... variants 116
13.1.1 The Status page 116
13.1.2 The Ports page 117
13.1.3 The System page 118
Manual CC-Link IE Field Basic
Version 1.0 03/2023
v

Contents
13.1.4 The User page 120
14 Technical data 121
14.1 General 122
14.2 CC-Link IE Field Basic protocol 123
14.3 Power supply of the module electronics/sensors 124
14.4 Power supply of the actuators 125
14.5 I/O ports 125
14.5.1 Digital inputs 126
14.5.2 Digital outputs 126
14.6 LEDs 128
14.7 Data transfer times 130
15 Accessories 133
Manual CC-Link IE Field Basic
Version 1.0 03/2023
vi

1 About this manual 1.1 General information
1 About this manual
1.1 General information
Please read the assembly and operating instructions in this manual carefully
before starting up the devices. Keep the manual where it is accessible to all
users.
The texts, figures, diagrams, and examples used in this manual are used
exclusively to explain how to operate and apply the devices.
Please contact us if you have any detailed questions on installing and starting
up the devices.
Belden Deutschland GmbH
– Lumberg Automation™ –
Im Gewerbepark 2
D-58579 Schalksmühle
Germany
lumberg-automation-support.belden.com
www.lumberg-automation.com
catalog.belden.com
Belden Deutschland GmbH – Lumberg Automation™ – reserves the right to
make technical changes or changes to this manual at any time without notice.
Manual CC-Link IE Field Basic
Version 1.0 03/2023
7

1.2 Explanation of symbols 1 About this manual
1.2 Explanation of symbols
1.2.1 Use of danger information
Danger information is denoted as follows:
Danger: Means that death, serious physical injury or substantial
damage to property will occur if the required safety measures are not
taken.
Warning: Means that death, serious physical injury or substantial
damage to property can occur if the required safety measures are not
taken.
Caution: Means that minor physical injury or damage to property can
occur if the required safety measures are not taken.
1.2.2 Use of general information
General information is denoted as follows:
Attention: Contains important information on the product, on how to
manage the product, or on the respective section of the documentation
to which your special attention is being drawn.
1.3 Version information
Version Created Changes
1.0 03/2023
Table 1: Overview of manual revisions
Manual CC-Link IE Field Basic
Version 1.0 03/2023
8

2 Safety instructions 2.1 Intended use
2 Safety instructions
2.1 Intended use
The products described in this manual are decentralized I/O Devices on an
Industrial Ethernet Network.
We adhere to all safety standards when developing, producing, testing, and
documenting our products. When you adhere to the handling specifications
and safety instructions described for the configuration, assembly, and correct
operation, there should not normally be any risks for people or equipment.
The modules fulfill the requirements of the EMC guidelines (89/336/EEC,
93/68/EEC and 93/44/EEC) and the low voltage guideline (73/23/EEC).
The devices are designed to be used in the industrial sector. The industrial
environment is distinguished by the fact that the consumer is not connected
directly to the public low voltage network. Additional measures are required
for use in residential areas or in business and commercial sectors.
Attention: This equipment may cause radio interference in residential
areas. In this case the operator may be requested to carry out
appropriate measures.
The proper and safe operation of this product depends on proper
transportation, storage, assembly, and installation, and careful operation.
During the configuration, installation, start-up, maintenance, and testing of
the devices, adhere to the safety and accident-prevention guidelines for the
specific application.
Only install cables and accessories that fulfill the requirements and
regulations for safety, electromagnetic compatibility, and, where applicable,
telecommunication end devices, as well as the specification information.
Information on which cables and accessories are permitted for the installation
can be obtained from Lumberg Automation™ or is contained in this manual.
Manual CC-Link IE Field Basic
Version 1.0 03/2023
9

2.2 Qualified personnel 2 Safety instructions
2.2 Qualified personnel
The configuration, installation, start-up, maintenance, and testing of the
devices may only be performed by a qualified electrician who is familiar with
the safety standards of the automation technology.
The personnel requirements are based on the requirement profiles described
by ZVEI, VDMA, or equivalent organizations.
Only electricians who are familiar with the content of this manual are
authorized to install and maintain the devices described. These are persons
who
Dbased on their technical training, knowledge, and experience, and their
knowledge of the pertinent standards, can evaluate the work to be carried
out and identify any potential risks or
Dbased on working for several years in a related sector, have the same level
of knowledge as they would have from the relevant technical training.
Only Belden Deutschland GmbH – Lumberg Automation™ – is permitted to
make changes to the hardware or software of the products that go beyond
the scope of this manual.
Warning: Making unqualified changes to the hardware or software,
or non-adherence to the warning information contained in this manual,
can result in serious personal injury or damage to equipment.
Attention: Belden accepts no liability for any damage caused by
unqualified personnel or improper use. This automatically voids the
warranty.
Manual CC-Link IE Field Basic
Version 1.0 03/2023
10