Belkin F8T014 User manual

1
Bluetooth USB Adapter
Quick Start Guide
version 2.1
© All rights reserved.
All trade names are registered trademarks of respective manufacturers listed.
The Bluetooth name and the Bluetooth trademarks are owned by Bluetooth SIG,Inc.
This manual may not be copied in any media or form without the written consent of original maker.
WELCOME .....................……….……….……….............................................. 1
Features ......................................................…......…………………..............…. 1
System Requirements .......................…………….....................................…….. 1
Before You Start .........................................................………………............…. 1
1. INSTALL WIDCOMM DRIVER ..….........................………........................ 2
2. SELECT BLUETOOTH SERVICES ......…......…................…….................. 4

2
Thank you for your purchase of the Bluetooth USB Adapter. Featuring Bluetooth wireless technology,
Bluetooth USB Adapter creates cable-free connections between your PCs and other Bluetooth devices.
Bluetooth USB Adapter is following Bluetooth V2.0 specification and is compatible with all Bluetooth
certified devices.
Features
 Compliant with Bluetooth standard version 2.0.
 Support for Microsoft Windows 98SE, Me, 2000 and XP.
 Easy operation and setting up.
System requirements
 Processor : Intel Celeron / Pentium III, IV; AMD Duron / Athlon
 Operating System : Microsoft Windows 98SE / ME / 2000 / XP
 System memory : 32MB at least
 Hard Drive Free Space : 11.5MB
Before you start
1). Remove any Microsoft native driver.
2). Please remove any previous version of Widcomm Bluetooth software existing in your system.
The remove procedures are as follows:
Step 1 : Click Start/Settings, then select Control Panel.
Step 2 : In the Control Panel window, double click Add/Remove programs icon.
Step 3 : Find out the item Widcomm Bluetooth Software x.x.x.x then remove it.

3
The following steps tell you how to install the Widcomm driver.
Note: If you bought the extra software, BLINK, it will be
automatically installed while you install software.
Step 1:
Put Widcomm Driver CD into CD drive of your PC, an Auto-install
program will start to guide you to complete the installation step by step.
You also can find Setup.exe from the given Widcomm Driver CD,
double click on it, the installshield wizard dialog box will open,
click Next.
Step 2:
Accept the software license agreement.
Click Next.
Step 3:
Select destination folder, you can choose the default or change to your
favorite.

4
Step 4:
Click Install to start the installation and files copying in processing ...
Step 5:
Click OK to ignore un-signed driver warning.
Step 6: If Bluetooth dongle is plugged in your PC now, his screen
will not be displayed, otherwise it will show up and one reminding
window will show up to ask you to plug in the USB adapter.
Plug in your USB adapter if it has not been plugged in before. Click
OK to continue.
Step 7: Installation is complete.
My Bluetooth places should appear on your desktop and a similar
icon also appears on the lower right corner of your screen.

5
When the first time Widcomm driver is installed, and USB Bluetooth
Dongle is plugged to your system, you can configure your Bluetooth
services for your system.
Step 1:
Double-click on the Bluetooth icon on the lower-right corner of
the screen, you will see configuration wizard, Click Next button.
Step 2:
Assign computer name and specify computer type, then click Next
button. These can be defined by customer.
Step 3:
Click Next button to configure Bluetooth services.

6
Step 4:The default setting is that all services are available, you can
check or uncheck one or more services, then click Next button..
Step 5: Click Skip.
Step 6: Configuration is completed. Click Finish.
P75352uk