Belkin F5L019 User manual

Quick Installation Guide
Mini Bluetooth
F5L019, F8T016
®Adapter

Table of Contents | 01
Table of Contents
Introduction........................................................2
System Requirements for Hardware .................................2
Product Contents .................................................2
Software Setup for Windows 2000, XP, and Vista .......................3
Bluetooth Service Selection ..........................................6
Information ........................................................8

Congratulations and thank you for purchasing the Belkin Bluetooth USB Adapter.
Now you can wirelessly connect your PCs and your Bluetooth devices. Please follow the steps on the
following pages to install drivers and software. Do not connect the Adapter until instructed. If your
laptop or desktop PC already has Bluetooth support, it is recommended that you first uninstall any
Bluetooth software found in Add/Remove Programs before running this installer.
System Requirements for Hardware
PC or Mac® computer with USB port
Windows® 98 SE, Me, 2000, XP, or Vista®
Mac OS® X v10.2.8 and higher (drivers provided by Apple)
Product Contents
Bluetooth USB Adapter
CD-ROM for software installation
Quick Installation Guide
Introduction
Introduction | 02

Software Setup for Windows 2000, XP, and Vista
Software Setup for Windows 2000, XP, and Vista | 03
1. Insert the CD into the PC’s CD-ROM drive.
After a few moments, the CD will run and the
opening install screen will appear.
2. This portion of the installer will load the
required Bluetooth software. Click “Next”
to proceed.
3. Choose “I accept the terms in the license
agreement” to accept the license agreement.
Click “Next” to continue.

Software Setup for Windows 2000, XP, and Vista
Software Setup for Windows 2000, XP, and Vista | 04
5. Confirm that the device software is ready to be
installed and click “Install”.
6. The install Wizard will begin to install the Belkin
Bluetooth software. This may take several
minutes.
4. Specify the location where the software
files will be installed on your hard drive. It is
recommended that you install the software in
the default directory. Click “Next” to continue.

Software Setup for Windows 2000, XP, and Vista
Software Setup for Windows 2000, XP, and Vista | 05
8. Confirm the completion of the Belkin Bluetooth
software installation. Click “Finish” to proceed
to the Bluetooth Service Selection portion of
the installation. Do not restart your computer
at this point.
7. You may now connect your Adapter to your
computer’s USB port. Click “OK” to continue
installation.

Bluetooth Service Selection
Bluetooth Service Selection | 06
2. Next, create a computer name and select the
computer type. Click “Next” after you identify
your computer name and type.
3. Click “Next” to proceed in configuring your
Bluetooth services.
After the driver is installed, you can configure your Bluetooth services for your system.
1. Begin the Service Selection by double-clicking
on the Bluetooth icon on the lower-right
corner of the screen. Once the Configuration
Wizard pops up, click the “Next” button
to proceed.

Bluetooth Service Selection
Bluetooth Service Selection | 07
4. The default setting will select all services that
are available. Select the services you want to
utilize and click “Next”.
5. To set up a connection now, click “Next”. It is
advised to set up connections later. To set up
later, click “Skip”.
6. Once configuration is complete, click “Finish”
to exit the installation process.

Information
Information | 08
FCC Statement
DECLARATION OF CONFORMITY WITH FCC RULES FOR
ELECTROMAGNETIC COMPATIBILITY
We, Belkin International, Inc., of 501 West Walnut Street, Compton, CA 90220,
declare under our sole responsibility that the product:
F5L019
to which this declaration relates:
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) this device may not cause harmful interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
.
Federal Communication Commission Interference Statement
This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This equipment generates, uses and can
radiate radio frequency energy and, if not installed and used in accordance with the instructions,
may cause harmful interference to radio communications. However, there is no guarantee that interference
will not occur in a particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on, the user is encouraged
to try to correct the interference by one of the following measures:
● Reorient or relocate the receiving antenna.
● Increase the separation between the equipment and receiver.
● Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
● Consult the dealer or an experienced radio/TV technician for help.