Belkin Keyboard Folio User manual

© 2012 Belkin International, Inc.
All rights reserved. All trade names are
registered trademarks of respective
manufacturers listed.
© 2012 Belkin International, Inc.
Tous droits réservés. Toutes les marques
de commerce sont des marques
déposées de leurs fabricants respectifs.
© 2012 Belkin International, Inc. Todos
los derechos reservados. Todos los
nombres comerciales son marcas
comerciales registradas de los
respectivos fabricantes enumerados.
belkin.com
8820tt01040 Rev. B00 • F5L104tt / F5L115tt
Belkin Tech Support
US: http://www.belkin.com/support

Quick Install Guide
Thank you for purchasing the Belkin
Keyboard Folio, a Bluetooth®keyboard
accessory to be used with tablet devices.
Keyboard Folio

Keyboard Folio
1. Folio
2. Tablet pocket
3. Detents for adjustable stand feature
4. Bluetooth®keyboard
5. Status LED
6. Charging port (micro-USB)
7. Bluetooth®pair button
2
3
4
Product Overview
6
1
5
7

Quick Install Guide
Package Contents
1. Keyboard Folio
2. Quick Install Guide
3. USB to Micro-USB Charging Cable
Contents may vary in different areas.
Quick Installation Guide
Keyboard Folio
Thank yo u for purchasi ng the Belkin Keyboard Folio, a Bluetooth®keybo ard accesso ry
to be used with iPad d evices.
23 1

Keyboard Folio
Setup
Insert tablet into tablet pocket ensuring correct orientation.
Fold keyboard away under tablet pocket to ensure tablet
screen is protected when folio is folded up.

Quick Install Guide
Stand Positions
The Keyboard Folio can be adjusted to several different angles using the detents in the folio.

Keyboard Folio
Charging the Keyboard
The Keyboard Folio contains an internal battery that is charged using the supplied USB to
USB-Micro cable. Connect the USB end to an appropriate USB power source (e.g., laptop,
desktop, USB wall charger, etc.). Connect the micro-USB end into the Keyboard Folio. When
the keyboard is plugged into a USB source, the Charge Status amber LED comes ON for
about 30 seconds and stays ON for as long as the battery is charging. When the battery is
fully charged, the Charge Status amber LED turns OFF.
The Keyboard Folio has been designed to be operational even when the battery is empty, as
long as it is connected via the USB to USB-Micro cable to an appropriate USB power source.
While it is charging, the Keyboard Folio will be fully operational whether the switch is set to an
on or off position.
Pairing the Keyboard
The Keyboard Folio connects to your tablet via Bluetooth technology.
Before using the Keyboard Folio, you must first pair it with your Bluetooth wireless-
technology-enabled tablet. Pairing is necessary for two Bluetooth devices to connect to each
other wirelessly. After creating a paired link, you do not need to repeat the pairing process; the
Keyboard Folio automatically links to the tablet when both devices are switched on. Pairing
must be performed every time you want to use the Keyboard Folio with a different tablet. If the
Keyboard Folio is not paired, the status LED will flash blue.

Quick Install Guide
To initiate pairing between the Keyboard Folio and tablet, ensure that they are in
close proximity:
For iPad 2:
1. Go to the Home screen on your iPad 2 and tap on “Settings > General > Bluetooth.”
2. Turn Bluetooth to “On.”
3. Turn on the Keyboard Folio and press and hold the “pair” key.
4. The Status LED will flash blue on the keyboard and the Keyboard Folio will show up under
“Devices” on the tablet. Select “Belkin Bluetooth Keyboard.”
5. A code will appear on the iPad 2 screen. Enter this code followed by the “Enter” key using
the keyboard of the Keyboard Folio.
6. When pairing is complete, the iPad 2 will notify you that the pairing was successful. The
Keyboard Folio will then be paired to your iPad 2.
7. If, after 60 seconds, pairing fails, you will have to repeat the steps above. You can view the
status from the screen of the iPad 2.
8. You can now use the Keyboard Folio to type onto your iPad 2.

Keyboard Folio
For Samsung Galaxy:
1. Go to the Home screen on your Samung Galaxy, and locate and tap on
“Settings > Wireless and Networks > Bluetooth.”
2. Turn Bluetooth to “On” by tapping on it.
3. Then choose “Bluetooth settings > Scan devices.”
4. Turn on the keyboard and press and hold the “pair” key.
5. The Status LED will flash blue on the keyboard and the keyboard will show up
under “Bluetooth Settings > Find Nearby Devices > Found Devices.” Select “Belkin
Bluetooth Keyboard.”
6. A code will appear on the Samsung Galaxy screen. Enter this code followed by the “Enter”
key using the keyboard.
7. When pairing is complete, the Samsung Galaxy will notify you that the pairing was
successful. The keyboard will then be paired to your Samsung Galaxy.
8. If after 60 seconds pairing fails, you will have to repeat the steps above. You can view the
status from the screen of the Samsung Galaxy.
9. You can now use the keyboard to type onto your Samsung Galaxy.

Quick Install Guide
Using the Keyboard
The Keyboard Folio is designed to prolong battery life and will enter into battery-saving
mode under prolonged inactivity. To wake the keyboard, press any button. The Status LED will
flash blue while the connection is being reestablished, and will be solid blue for two seconds
when the connection is successfully established. The Status LED then turns off during
ongoing operation.