Belkin VISION N1 User manual

N1 Wireless Router Quick Installation Guide
Setup OverviewSetup Overview
11
StepStep
Hardware Connections: Hardware Connections:
Use the instructions in thisUse the instructions in this
Guide to connect your Router,Guide to connect your Router,
computer, and modem.computer, and modem.
22
StepStep
Automatic Confi guration:Automatic Confi guration:
Insert the CD into yourInsert the CD into your
computer and follow thecomputer and follow the
on-screen instructions.on-screen instructions.
33
StepStep
Connect other Computers:Connect other Computers:
The CD can assist you in The CD can assist you in
connecting other computersconnecting other computers
to your new network.to your new network.
Step 1 - Hardware Connections



A
Unplug your modem’s power cord.
Put the Router next to the modem.
Raise the Router’s antennas.
B
Locate the networking cable that connects your
modem and computer.
Unplug that cable from your modem, and plug it into
any gray port on the back of the Router.
C
Find your new networking cable (it came in the box
with your Router) and connect it to the yellow port on
the back of the Router.
Connect the other end to your modem, in the port
that’s now free.
(Optional)(Optional)

Belkin provides free technical support via phone and the Web. Belkin provides free technical support via phone and the Web.
However, we encourage you to attempt (or retry) Steps 1 and However, we encourage you to attempt (or retry) Steps 1 and
2 before contacting Support. The Setup Assistant has built-in 2 before contacting Support. The Setup Assistant has built-in
intelligence to help diagnose and fi x common problems.intelligence to help diagnose and fi x common problems.
If you’re still having trouble, contact Belkin Support.If you’re still having trouble, contact Belkin Support.
UKUK
http://www.belkin.com/uk/http://www.belkin.com/uk/
Click on Support Centre > Click on Support Centre >
Networking SupportNetworking Support
0845 607 77870845 607 7787
Step 1 - Hardware Connections (continued)
D
Plug in your modem’s power cord.
Wait 60 seconds for the modem to start up.
Plug the Router’s power supply into the black port
on the back.
Plug the other end into the wall outlet.
E
Wait 20 seconds for the Router to start up.
Look at the display on the front of the Router.
Make sure the “Wired” and “Router” icons are lit
up in blue.
If they are not, recheck your connections.
Insert the CD into your computer.
The Setup Assistant will automatically appear on your
computer’s screen.
Follow the instructions there.
Step 2 – Setup Assistant
SupportSupport
P75168ukP75168uk
F5D8231uk4F5D8231uk4
© 2006 Belkin Corporation. All rights reserved. All trade names are © 2006 Belkin Corporation. All rights reserved. All trade names are
registered trademarks of respective manufacturers listed.registered trademarks of respective manufacturers listed.