
3 Mount it
Remove the protective lm from the Velcro on the
back of the transmitter and mount it on the wall.
Alternatively use the supplied screw and plug.
4 Turn it on
Pull the battery tab to start the transmitter. The
indicators light up in green to show that it is on.
5 Connect it
Connect the USB cable to the power adapter.
Then plug the adapter into a wall outlet. If you
have a landline telephone, connect it to the
telephone jack using the supplied splitter.
6 Test the mobile phone
Have someone call your mobile. The yellow LED
on the Visit receiver blinks and it starts to ash,
sound or vibrate (depending on the receiver).
7 Test the landline phone
Call your landline phone. The yellow LED on the
Visit receiver lights up and it starts to ash, sound
or vibrate (depending on the receiver).
2Install the Visit app
Download the Bellman Visit app from
the App Store® or Google Play™ and
follow the setup instructions.
Installing the app
1 Turn on Bluetooth®
Swipe down from the top of the screen and tap
the Bluetooth icon.
100%
Music
10:02 IThu, 26 Sep
WiFi Sound Bluetooth Flight mode
10:02 IThu, 26 Sep
WiFi Sound Bluetooth Flight mode
The appearance of your
phone splitter may dier.
ENGLISH
7
6
5
4
3
Installing the transmitter