Bender DPM2x16FP User manual

Manual
EN
DPM2x16FP_D00296_01_M_XXEN/09.2017
For use in electric vehicle (EV)
charging stations, wall boxes
and street light charging points
DPM2x16FP Module

Bender GmbH & Co. KG
Postbox 1161 • 35301 Grünberg • Germany
Londorfer Str. 65 • 35305 Grünberg • Germany
Tel.: [phone] • Fax: [phone]
E-Mail: [email protected] • www.bender.de
©Bender GmbH & Co. KG
All rights reserved.
Reprinting only with permission of the publisher.
Subject to change!
Photos: Bender archive

Table of Contents
3
DPM2x16FP_D00296_01_M_XXEN/09.2017
1. Important information .................................................................................... 5
1.1 How to use this manual ................................................................................. 5
1.2 Technical support: service and support ................................................... 5
1.3 Delivery conditions .......................................................................................... 5
1.4 Inspection, transport and storage .............................................................. 6
1.5 Disposal ............................................................................................................... 6
1.6 Intended use ...................................................................................................... 6
2. Display module ................................................................................................ 7
2.1 Dimensions for mounting ............................................................................. 8
3. Display texts on the Display module ........................................................... 9
4. Technical data ............................................................................................... 13
4.1 Tabular data .................................................................................................... 13
4.2 Standards, approvals, certifications ........................................................ 14
4.3 Ordering information .................................................................................. 14

5
DPM2x16FP_D00296_01_M_XXEN/09.2017
1. Important information
1.1 How to use this manual
Always keep this manual within easy reach for future reference.
1.2 Technical support: service and support
Technical support by phone or e-mail for all Bender products
 Questions concerning specific customer applications
 Commissioning
 Troubleshooting
Telephone: [phone]*
Fax: [phone]
In Germany only: 0700BenderHelp (Tel. and Fax)
E-mail: [email protected]
*Available from 7.00 a.m. to 8.00 p.m. 365 days a year (CET/UTC+1)
1.3 Delivery conditions
Bender sale and delivery conditions apply. These can be obtained from Bend-
er in printed or electronic format.
This manual is intended for qualified personnel working in
electrical engineering and electronics!
This symbol denotes information intended to assist the user
in making optimum use of the product.

Important information
6DPM2x16FP_D00296_01_M_XXEN/09.2017
1.4 Inspection, transport and storage
Inspect the dispatch and equipment packaging for damage, and compare the
contents of the package with the delivery documents. In the event of damage
in transit, please contact Bender immediately. The devices must only be
stored in areas where they are protected from dust, damp, and spray and drip-
ping water, and in which the specified storage temperatures can be ensured.
1.5 Disposal
Abide by the national regulations and laws governing the disposal of this de-
vice. Ask your supplier if you are not sure how to dispose of the old equip-
ment. For more information on the disposal of Bender devices, refer to our
homepage at www.bender.de -> Service & support.
1.6 Intended use
This manual provides a description of the Display module, which can only be
used in combination with Bender charge controllers. The charge controller is
designed for use in electric vehicle (EV) charging stations, wall boxes and
street light charging points. This document should be used together with the
Charge Controller operating manual(s), which can be downloaded from:
www.bender.de/en/service-support/downloads.
The Display module is a separate board and displays the current status infor-
mation as well as the charge status. The Display module can be connected to
the charge controller, the main component of a charging point, using a
standard RJ45 cable. The second RJ45 cable can be connected to the RFID
module.
Electrostatic discharge (ESD) may cause damage to electron-
ic components. Observe precautions for handling electro-
static sensitive devices according to DIN EN 61340-5-1 and
DIN EN 61340-5-2.
CAUTION

7
DPM2x16FP_D00296_01_M_XXEN/09.2017
2. Display module
The Display is controlled via the CC612 charge controller. The Display module
shown below contains an LED display with 2 x 16 characters and two RJ45 in-
terface sockets.

Display module
8DPM2x16FP_D00296_01_M_XXEN/09.2017
The Display module can be connected to the charge controller, the main com-
ponent of a charging point, using a standard RJ45 cable. The second RJ45 ca-
ble interface socket is used to connect to the RFID module. The CC612 and the
RFID module can be connected using either RJ45 cable interface socket. The
RJ45 sockets are interchangeable.
The power supply is taken from the available RJ45. The voltage ranges corre-
spond to the bus system of the CC612. Software control of the Display module
is carried out via the CC612.
2.1 Dimensions for mounting
The maximum length of the RJ45 cable is 1 meter.
82.50 mm
2.30 mm
33.56 mm
39.10 mm
44.40 mm
48.20 mm
3.85 mm
11.90 mm
65.90 mm
73.90 mm
78.85 mm

Display texts on the Display module
9
DPM2x16FP_D00296_01_M_XXEN/09.2017
3. Display texts on the Display module
The display is selected under the menu item "Type of Display" on the Manu-
facturer page (URL: http://192.168.123.123/manufacturer).
The preferred display language is selected under the menu item "Language of
Display" on the Operator page (URL: http://192.168.123.123/operator). The
selectable languages are English, German and a multiple language option
consisting of English, German, French and Dutch.

Display texts on the Display module
10 DPM2x16FP_D00296_01_M_XXEN/09.2017
The Display module displays the following text:
Status: Error
English: "General system error"
German: "Allgemeiner Systemfehler"
Multi-Language: "General system error"
"Allgemeiner Systemfehler"
"Erreur système non spécifiée"
"Algemene systemfout"
Status: Idle
English: "Available"
German: "Frei"
Multi-Language: "Available - Frei- Libre - Gereed"
Status: Idle vehicle detected
English: "Please authorize..."
German: "Bitte autorisieren..."
Multi-Language: "Please authorize..."
"Bitte autorisieren..."
"Veuillez autoriser..."
"Gelieve te autoriseren..."
Status: Reserved
English: "Reserved"
German: "Reserviert"
Multi-Language: "Reserved - Reserviert"
"Réservé "
"Gereserveerd"

Display texts on the Display module
11
DPM2x16FP_D00296_01_M_XXEN/09.2017
Status: Reserved vehicle detected
English: "Please authorize..."
German: "Bitte autorisieren..."
Multi-Language: "Please authorize..."
"Bitte autorisieren..."
"Veuillez autoriser..."
"Gelieve te autoriseren..."
Status: Authenticating
English: "Processing authorization..."
German: "Autorisierung läuft..."
Multi-Language: "Processing authorization..."
"Autorisierung läuft..."
"En attente de autorisation..."
"Autorisatie in behandeling…"
Status: Authorized no vehicle
English: "Vehicle not connected..."
German: "Auto nicht eingesteckt..."
Multi-Language: "Vehicle not connected..."
"Auto nicht eingesteckt..."
"Aucune connexion avec la voiture"
"Auto niet verbonden"
Status: Charging
English: "Charging for: x d:y d"
"Charging for: 1 day y h"
"Charging for: x days y h"
"Charging more than 99 days"

Display texts on the Display module
12 DPM2x16FP_D00296_01_M_XXEN/09.2017
German: "Lädt seit: x d:y d|"
"Lädt seit: 1 Tag y h|"
"Lädt seit: x Tagen y h|"
"Lädt seit mehr als 99 Tagen"
Multi-Language: "Charging for: x d: y d"
"Lädt seit: x d:y d"
"Chargement en c. depuis x d:y h"
"Bezig met laden sinds: x d:y d"
"Charging for: 1 day y h"
"Lädt seit: 1 Tag y h"
"Chargement en c. depuis 1jour y h"
"Bezig met laden sinds 1 dag y h"
"Charging for: x days y h" (h = hours)
"Lädt seit: x Tagen y h"
"Chargement en c. depuis x j. y h"
"Laadt gedurende x dagen y h"
"Charging more than 99 days"
"Lädt seit mehr als 99 Tagen"
"Chargement plus de 99 jours"
"Laadt gedurende meer dan 99 dagen"
Status: Unavailable
English: "Not operational"
German: "Ausser Betrieb"
Multi-Language: "Not operational/Ausser Betrieb"
"Hors service/Buiten gebruik"

Technical data
13
DPM2x16FP_D00296_01_M_XXEN/09.2017
4. Technical data
4.1 Tabular data
Insulation coordination acc. to IEC 60664-1/IEC 60664-3
Rated voltage ........................................................................................................................................................ 12.5 V
Overvoltage category.....................................................................................................................................................III
Pollution degree............................................................................................................................................................. 2
Rated impulse withstand voltage .......................................................................................................................... 800 V
Rated insulation voltage ...................................................................................................................................... 12.5 V
Altitude ..................................................................................................................................≤ 2000 m above sea level
Nominal voltage/nominal current
Nominal voltage DC 3.3/5 V
Nominal voltage tolerance....................................................................................................................................± 5%
Nominal current < 100 mA
Environment/EMC
EMC ........................................................................................................................................................... EN 61851-22
Operating temperature.............................................................................................................................-25…+75 °C
Classification of climatic conditions acc. to IEC 60721:
Stationary use (IEC 60721-3-3) 3K5 (except condensation and formation of ice)
Transport (IEC 60721-3-2) ....................................................................................................................................... 2K3
Long-term storage (IEC 60721-3-1).........................................................................................................................1K4
Classification of mechanical conditions acc. to IEC 60721:
Stationary use (IEC 60721-3-3) .............................................................................................................................. 3M4
Transport (IEC 60721-3-2) ..................................................................................................................................... 2M2
Long-term storage (IEC 60721-3-1)........................................................................................................................ 1M3
Connection
Connection to charge controller................................................................................................................via RJ45 cable
Connection to RFID module ......................................................................................................................via RJ45 cable
Cable length.......................................................................................................................................................... < 1 m

Technical data
14 DPM2x16FP_D00296_01_M_XXEN/09.2017
Other
Brightness of display background illumination ........................................................................................to 0. . . 100 %
Bus............................................................................................................................................................................... I2C
Protection class ......................................................................................................................................................... IP00
Weight..................................................................................................................................................................... 150 g
4.2 Standards, approvals, certifications
The RFID has been developed in compliance with:
 EN 61851-1 :2011
 EN 61851-22 :2002
 EN 61439-1 :2011 (pending)
 DIN IEC/TS 61439-7 :2014 (pending)
4.3 Ordering information
Type Art. No.
DPM2x16FP B94060120

Bender GmbH & Co. KG
Postbox 1161 • 35301 Grünberg • Germany
Londorfer Str. 65 • 35305 Grünberg • Germany
Tel.: [phone] • Fax: [phone]
E-Mail: [e-mail] • www.bender.de
Photos: Bender archive BENDER Group