Bender COMTRAXX CP700 User manual

Manual
EN
COMTRAXX® CP700
Condition Monitor
for the connection of Bender BMS devices
and universal measuring devices
to TCP/IP networks
Software version: V1.8
CP700_D00005_02_M_XXEN/06.2014

Bender GmbH & Co. KG
P.O.Box 1161 • 35301 Grünberg • Germany
Londorfer Straße 65 • 35305 Grünberg • Germany
Tel.: [phone] • Fax: [phone]
E-mail: [email protected] • www.bender.de
© Bender GmbH & Co. KG
All rights reserved.
Reprinting only with permission
of the publisher.
Subject to change!
Photos: Bender archives and bendersystembau archives.

3
Table of Contents
CP700_D00005_02_M_XXEN/06.2014
1. Making effective use of this document ............................................................... 9
1.1 How to use this manual ......................................................................................................... 9
1.2 Quick start ................................................................................................................................... 9
2. Safety instructions ............................................................................................... 11
2.1 Work activities on electrical installations ..................................................................... 11
2.2 Intended use ........................................................................................................................... 11
2.3 Address setting and termination .................................................................................... 12
2.4 Delivery conditions, guarantee, warranty and liability ........................................... 12
3. Product description ............................................................................................. 13
3.1 Scope of supply ..................................................................................................................... 13
3.2 Device features ...................................................................................................................... 13
3.3 Possible applications ........................................................................................................... 13
3.4 Description of function ....................................................................................................... 14
3.4.1 Interfaces .................................................................................................................................. 14
3.4.2 Process image ........................................................................................................................ 14
3.4.3 CP700-compatible devices ................................................................................................ 14
3.4.4 Functions available via touch screen ............................................................................. 15
3.4.5 Functions available via the web user interface .......................................................... 15
3.5 Software products used ...................................................................................................... 16
4. Installation, connection and commissioning .................................................. 17
4.1 Preliminary considerations ................................................................................................ 17
4.2 Installing the device ............................................................................................................. 17
4.2.1 Essential information on mounting ............................................................................... 17
4.2.2 Type of installation ............................................................................................................... 18
4.2.3 Practice ..................................................................................................................................... 18
4.3 Connection of the device ................................................................................................... 20
4.3.1 Overview of the bus device interfaces .......................................................................... 20
4.3.2 DC 24 V power supply ........................................................................................................ 21
4.3.3 Earthing .................................................................................................................................... 21
4.3.4 BMS bus, Modbus/RTU ........................................................................................................22
4.4 Commissioning ...................................................................................................................... 23

Table of Contents
4CP700_D00005_02_M_XXEN/06.2014
5. Display and operating elements ....................................................................... 25
5.1 Operating elements at the rear of the device ............................................................. 25
5.1.1 Status LEDs ............................................................................................................................... 26
5.1.2 Battery ....................................................................................................................................... 26
5.1.3 CompactFlash card ............................................................................................................... 26
5.2 Touchscreen ............................................................................................................................ 27
5.3 Operation via touch screen ................................................................................................ 28
5.3.1 Main menu ............................................................................................................................... 28
5.3.2 "Settings" menu ..................................................................................................................... 29
5.3.2.1 "Interface" menu ............................................................................................................. 29
5.3.2.2 "Language" menu ........................................................................................................... 31
5.3.3 "Alarms" menu ........................................................................................................................ 32
5.3.4 "Bus overview" menu ........................................................................................................... 32
5.3.5 Displaying the device info for CP700 ............................................................................. 33
5.3.6 Using the functions for Bender PEM… universal measuring devices ............... 33
6. Web user interface of the CP700 ....................................................................... 35
6.1 Menu structure of the web user interface .................................................................... 35
6.2 Browser configuration ......................................................................................................... 37
6.3 Initial operation of the web user interface: .................................................................. 37
6.4 Start page and operating language ................................................................................ 38
6.4.1 Opening the start page ....................................................................................................... 38
6.4.2 Changing the language ....................................................................................................... 38
6.5 Menu bar ................................................................................................................................... 39
6.6 Bus overview and device information ........................................................................... 40
6.6.1 Creating a password protection for CP700 .................................................................. 40
6.6.2 Buttons for the list of bus devices ................................................................................... 42
6.6.3 CP700 on the internal BMS bus ........................................................................................ 43
6.6.4 Querying device information ............................................................................................ 43
6.6.5 Displaying the help text ...................................................................................................... 44
6.6.6 Loading the menu of a bus device .................................................................................. 45
6.6.7 Displaying the settings of a bus device ......................................................................... 45
6.6.8 Creation and further processing of a bus device Back-up/Report ....................... 46
6.6.8.1 Creating a backup ........................................................................................................... 46
6.6.8.2 Show the backup ............................................................................................................ 47
6.6.8.3 Creating a new backup with a comparison of the device parameters ........ 47
6.6.8.4 Using a backup for parameter setting .................................................................... 48
6.6.9 History memory ...................................................................................................................... 50
6.6.9.1 Displaying the history memory ................................................................................. 50
6.6.9.2 Evaluating the history memory ................................................................................. 51

Table of Contents
5
CP700_D00005_02_M_XXEN/06.2014
6.6.9.3 Exporting the history memory .................................................................................. 52
6.6.9.4 Delete the history memory ......................................................................................... 52
6.6.9.5 Displaying the history memory of BMS devices ................................................. 52
6.6.10 Data logger .............................................................................................................................. 53
6.6.10.1 Data logger setting ........................................................................................................ 53
6.6.10.2 Displaying the data logger ......................................................................................... 53
6.6.10.3 Evaluating the data logger ......................................................................................... 54
6.6.10.4 Apply the filter to the graphical representation ................................................. 58
6.6.10.5 Exporting the data logger ........................................................................................... 58
6.6.10.6 Deleting the data logger ............................................................................................. 59
6.6.10.7 Displaying the data logger of BMS devices .......................................................... 59
6.7 Parameter setting for bus devices .................................................................................. 60
6.7.1 Operating elements for parameter setting ................................................................. 60
6.7.2 Setting the parameters for RCMS460-L ......................................................................... 61
6.7.3 Parameter setting of the CP700 using the "Settings" menu ................................. 62
6.8 Entering individual texts ....................................................................................................65
6.8.1 Enter individual texts for an RCMS460-L ...................................................................... 65
6.8.2 Displaying, filtering, exporting and importing individual texts ........................... 67
6.8.2.1 Displaying individual texts ......................................................................................... 67
6.8.2.2 Filtering entries ............................................................................................................... 67
6.8.2.3 Exporting individual texts ........................................................................................... 68
6.8.3 Editing and importing individual texts ......................................................................... 69
6.9 E-mail notification in the event of an alarm ................................................................ 71
6.9.1 Create templates: To whom and when is an e-mail to be sent ............................ 71
6.9.2 Select devices and channels that are to trigger an e-mail notification ............. 74
6.9.3 Displaying an e-mail overview ......................................................................................... 75
6.10 Using the device failure monitoring function ............................................................ 76
6.10.1 Activating/deactivating device failure monitoring function
in the bus overview .............................................................................................................. 77
6.10.2 Displaying overview device failure monitoring
and adding devices ..............................................................................................................78
6.11 Alarms ....................................................................................................................................... 80
6.12 Tools ........................................................................................................................................... 81
6.12.1 BMS recording ........................................................................................................................ 82
6.12.2 BMS analyser ........................................................................................................................... 83
6.12.3 BMS Log files ........................................................................................................................... 86
6.12.4 Network parameters ............................................................................................................ 86
6.12.5 Socket state ............................................................................................................................. 87
6.12.6 Software update .................................................................................................................... 88
6.12.7 Software options and licensing ....................................................................................... 90
6.12.7.1 Identifying activated software options .................................................................. 90

Table of Contents
6CP700_D00005_02_M_XXEN/06.2014
6.12.7.2 Acquiring licences for additional software options and loading the licence
file ......................................................................................................................................... 91
6.12.7.3 Activate acquired software options ......................................................................... 92
6.12.8 Modbus register ..................................................................................................................... 93
6.12.8.1 Modbus representation of device information .................................................... 93
6.12.8.2 Modbus representation of a BMS channel ............................................................ 94
6.12.9 Modbus control commands for BMS devices .............................................................. 95
6.12.10Individual texts, device failure monitoring, e-mail configuration ....................... 96
6.13 Visualisation ............................................................................................................................. 97
6.13.1 Create visualisation ............................................................................................................... 97
6.13.1.1 Creating a new view page ........................................................................................... 99
6.13.1.2 Adding a link to view pages ..................................................................................... 101
6.13.1.3 Adding new elements ................................................................................................ 102
6.13.1.4 Adding a new text line ............................................................................................... 104
6.13.1.5 Adding a new data logger ........................................................................................ 105
6.13.2 Save, export, import and exit configuration ............................................................. 106
6.13.2.1 Save and exit configuration ..................................................................................... 106
6.13.2.2 Export configuration ................................................................................................... 106
6.13.2.3 Import configuration .................................................................................................. 106
6.13.3 Using the visualisation function .................................................................................... 107
6.13.4 Open the operating manual as PDF file ..................................................................... 109
6.13.5 System visualisation .......................................................................................................... 110
6.13.5.1 Start system visualisation ......................................................................................... 110
6.13.5.2 Check the activation of the application memory ............................................. 110
6.13.5.3 Add new device to system visualisation ............................................................. 111
6.13.5.4 Change or delete the device .................................................................................... 111
6.13.5.5 Export system visualisation ...................................................................................... 112
6.13.5.6 Import system visualisation ..................................................................................... 112
6.13.5.7 Sort system visualisation ........................................................................................... 112
6.13.5.8 Use system visualisation ............................................................................................ 113
6.14 Manage Modbus devices ................................................................................................. 114
6.14.1 Adding a new Modbus device ....................................................................................... 114
6.14.2 Delete Modbus device ......................................................................................................115
6.14.3 Editing a Modbus device ................................................................................................. 115
6.14.4 Creating, editing or deleting templates ..................................................................... 115
6.14.4.1 Add new template ....................................................................................................... 116
6.14.4.2 Delete template ............................................................................................................ 116
6.14.4.3 Change template .........................................................................................................116
6.15 Manage virtual devices ..................................................................................................... 117
6.15.1 Adding a new virtual device ........................................................................................... 117
6.15.2 Deleting a virtual device .................................................................................................. 118

Table of Contents
7
CP700_D00005_02_M_XXEN/06.2014
6.15.3 Changing a virtual device ................................................................................................ 118
6.15.4 Setting the channels of a virtual device ...................................................................... 119
7. Data access using the Modbus/TCP protocol ............................................... 121
7.1 Exception code .................................................................................................................... 121
7.2 Modbus requests ................................................................................................................ 121
7.3 Modbus responses .............................................................................................................122
7.4 Structure of an exception code ..................................................................................... 122
7.5 Modbus address structure for BMS devices .............................................................. 122
8. Process image in the memory of the CP700 ................................................. 123
8.1 Data request ......................................................................................................................... 123
8.1.1 Modbus function code ...................................................................................................... 123
8.1.2 How are memory areas organised? .............................................................................. 123
8.2 Memory scheme of the process image ...................................................................... 124
8.2.1 BMS device address assignment within the Modbus ............................................ 124
8.2.2 Memory scheme of an individual BMS device .......................................................... 124
8.2.3 Device type ............................................................................................................................ 126
8.2.4 Timestamp ............................................................................................................................. 126
8.2.5 C = Common alarm and D = Device lost (device failure) ...................................... 126
8.2.6 Channels 1 to 32 with analogue and/or digital values .......................................... 126
8.2.6.1 Float = Floating point value of the BMS channels ........................................... 127
8.2.6.2 A&T = Alarm type and test type (internal) .......................................................... 127
8.2.6.3 R&U = Range and unit ................................................................................................ 128
8.2.6.4 Channel description .................................................................................................... 129
8.2.6.5 Channel 33 to 64 .......................................................................................................... 130
8.3 Reference data records of the process image .......................................................... 131
8.3.1 Address assignment of the reference data record .................................................. 131
8.3.2 Reference value on channel 1 ........................................................................................ 131
8.3.3 Reference value on channel 2 ........................................................................................ 132
8.3.4 Explanation of how to access floating point values ............................................... 132
8.4 Channel descriptions for the process image ............................................................ 133
8.5 Modbus control commands for BMS devices ........................................................... 138
9. Monitor for Power quality ................................................................................ 141
9.1 Displaying alarms/measured values ............................................................................ 141
9.2 Triggering alarm messages in the case of events ................................................... 142
9.2.1 Making settings for events .............................................................................................. 142
9.2.1.1 Creating template for events ................................................................................... 142
9.2.1.2 Activate template for events .................................................................................... 143

Table of Contents
8CP700_D00005_02_M_XXEN/06.2014
9.2.2 Acknowledging alarm messages for events ............................................................. 143
9.2.3 Acknowledging alarm messages for events ............................................................. 143
9.3 Displaying a PEM…'s voltages/currents .................................................................... 144
9.4 Displaying the phasor diagram of a PEM… .............................................................. 145
9.5 Displaying harmonics by means of PEM… ............................................................... 146
9.6 Waveform recorder of a PEM575 universal measuring device .......................... 148
9.6.1 Using the waveform recorder ........................................................................................ 148
9.6.2 Setting the waveform recorder ..................................................................................... 152
9.6.3 Setting the trigger event for the waveform recorder ............................................ 153
9.6.3.1 Setting the trigger event undervoltage/overvoltage (SAG/SWELL) ......... 153
9.6.3.2 Setting the trigger event transients ...................................................................... 154
9.7 Displaying the power diagram of a PEM… ............................................................... 155
9.7.1 Set the options .................................................................................................................... 156
9.8 Data recorders and high-speed data recorders ....................................................... 157
10. Technical data ................................................................................................... 159
10.1 Data in tabular form ........................................................................................................... 159
10.2 Dimension diagram ...........................................................................................................161
10.3 Control panel cut-out ........................................................................................................ 161
10.4 Standards, approvals, certifications ............................................................................. 162
10.5 Ordering information ........................................................................................................162
10.6 Disposal .................................................................................................................................. 162
11. Troubleshooting .............................................................................................. 163
11.1 Damage in transit ............................................................................................................... 163
11.2 Malfunctions ......................................................................................................................... 163
11.2.1 What should be checked? ............................................................................................... 163
11.2.2 Fault messages with error code .................................................................................... 164
11.2.3 Frequently asked questions ............................................................................................ 164
11.2.4 Where do you get help? ................................................................................................... 164
11.2.5 Battery change ..................................................................................................................... 165
INDEX ......................................................................................................................... 167

9
CP700_D00005_02_M_XXEN/06.2014
1. Making effective use of this document
1.1 How to use this manual
This operating manual will concern qualified experts in electrical engineering and communica-
tion technology!
To make it easier for you to understand and revisit certain sections of text and instructions in the
manual, we have used symbols to identify important instructions and information. The meaning of
these symbols is explained below:
1.2 Quick start
Connection of the CP700
If you are familiar with the installation and connection of electrical devices as well as networking,
particularly with Ethernet, you can start right away with the wiring diagram on "Connection of the
device" on page 20.
Using the web user interface
You can easily access the CP700 using a standard web browser. For details refer to page 35.
Using the Modbus/TCP functions
Information about this complex field can be found as of page 121.
The signal word indicates that there is a high risk danger that will result in elec-
trocution or serious injury if not avoided.
This signal word means that there is a medium risk of danger that can lead to
death or serious injury, if not avoided.
This signal word indicates a low level risk that can result in minor or moderate
injury or damage to property if not avoided.
This symbol denotes information intended to assist the user
to make optimum use of the product.
DANGER
WARNING
CAUTION

Making effective use of this document
10 CP700_D00005_02_M_XXEN/06.2014

11
CP700_D00005_02_M_XXEN/06.2014
2. Safety instructions
2.1 Work activities on electrical installations
Compliance with applicable regulations governing work on electrical installations, and with the
regulations derived from and associated with them, is mandatory. EN 50110 is of particular
importance in this regard.
If the device is being used in a location outside the Federal Republic of Germany, the applicable
local standards and regulations must be complied with. European standard EN 50110 can be
used as a guide.
2.2 Intended use
The Condition Monitor CP700 connects the following devices to Ethernet TCP/IP networks:
Devices on the Bender internal serial BMS bus
Bender universal measuring devices PEM… to Modbus/RTU or Modbus/TCP.
The CP700 converts alarms, measured values and statuses into Modbus/TCP protocols and HTTP.
That allows connection to Modbus/TCP networks as well as visualisation and evaluation using stand-
ard web browsers with SilverlightTM plugin.
The CP700 has been designed, developed and produced for normal use in the industrial sector. The
CP700 has not been designed for use bearing high risks and dangers, which can result in death, in-
jury, serious physical harm or any other loss unless exceptionally high safety measures are ensured.
In particular, its application for the monitoring of nuclear reactions in nuclear power stations, moni-
toring of flight control systems, for air traffic control, control of means of mass transport, medical life
support systems, and weapon system control involve these risks.
Risk of fatal injury from electric shock
Any work on electrical installations which is not carried out properly can lead to
death and injury!
►Only skilled persons are permitted to carry out the work necessary to
install, commission and run a device or system.
The device is only suitable for use in the industrial sector. The emissions of the de-
vice may exceed the permissible limits for residential, business or commercial ar-
eas or small companies.
The CP700 is not intended for use on smartphones or
tablet PCs.
DANGER
CAUTION

Safety instructions
12 CP700_D00005_02_M_XXEN/06.2014
2.3 Address setting and termination
In order to ensure proper functioning of the Condition Monitor CP700, correct address assignment
and termination of the connected bus systems according to their specification is of utmost impor-
tance.
2.4 Delivery conditions, guarantee, warranty and liability
The conditions of sale and delivery set out by Bender apply.
Conditions of sale and delivery can be obtained from Bender in printed or electronic format.
Assigning addresses that are already used by existing devices on the bus systems
concerned may cause serious malfunctions.
►Ensure correct address setting and termination of the CP700.
The five year guarantee "5forU" does not include parts subject to wear, such as
the touch screen and the battery.
CAUTION

13
CP700_D00005_02_M_XXEN/06.2014
3. Product description
3.1 Scope of supply
You will receive:
The CP700
This operating manual as pdf file in the device memory,
accessible via the web user interface under "Tools" > "Manual"
A short operating instruction
A pluggable screw clamp for the voltage supply
Two RS-485 cables for the connection to the BMS bus and the Modbus/RTU, 2 m
Two terminating resistors each for BMS bus and Modbus/RTU (bus termination set)
Four mounting brackets for panel mounting
3.2 Device features
Condition Monitor for Bender BMS devices and universal measuring devices
7“ TFT WVGA Colour Display
Analogue resistive touch screen
Small mounting depth
Fanless operation
Integrated gateway to Ethernet (TCP/IP), 10/100/1000 Mbit/s
Remote access via LAN, WAN or Internet
Support of devices connected to the internal bus via Modbus/RTU or Modbus/TCP
Access to all devices connected to the BMS bus using the web server
Can be operated on Modbus/RTU
History memory for 1000 entries
12 data loggers, freely configurable with 1000 entries each
3.3 Possible applications
Clearly presented information about the status of devices and systems via 7“ touch screen
Specific system overview according to individual system description
Display und visualisation of device and system statuses via web browser
Selective e-mail notification to various user groups in the event of alarms
Support of professional visualisation programs
Observing and analysing of compatible Bender products (universal measuring devices, RCMS,
Isometer, EDS systems)
Parameter setting for devices, storing, documentation and restoring of parameters in a clear
and practice-oriented manner
Remote diagnosis, remote maintenance

Product description
14 CP700_D00005_02_M_XXEN/06.2014
3.4 Description of function
3.4.1 Interfaces
The CP700 communicates with the associated devices via three different interfaces:
BMS bus (RS-485) for Bender systems such as EDS46x/49x, RCMS46x/49x and MEDICS. The
CP700 can be operated as master or slave. With the CP700 in master mode, requests can be
answered faster. The CP700 can only be operated on the internal BMS bus.
Modbus/RTU (RS-485) CP700 in master mode for Bender universal measuring devices PEM..3
and also PEM..5 with reduced functionality (*).
Modbus/TCP Ethernet) for Bender universal measuring devices PEM..5
The CP700 can usually be integrated into existing LAN structures, but can also be operated on a sin-
gle PC via Ethernet/TCP/IP. The CP700 can also be used as master for Bender BMS devices and/or uni-
versal measuring devices without being connected to a PC.
3.4.2 Process image
Using the information from communication with the assigned devices, the CP700 creates and saves
a process image. This process image contains all alarms, status information and measured values of
the associated devices.
The CP700 combines the information of three different interfaces and makes it available for:
indication on the integrated touch screen
the operation of a PC via the web user interface
the transmission to external visualisation programs or PLCs via Modbus/TCP.
The CP700 provides a uniform user interface for the devices associated via different interfaces (max.
247 devices). In order to be able to identify each individual device, one individual address is available
for each device on this interface. BMS and Modbus/RTU devices receive the appropriate address for
their interface. A virtual address is assigned to Modbus/TCP devices.
3.4.3 CP700-compatible devices
For an up-to-date list ofthe Bender BMS devices compatible with CP700 and the universal measuring
devices PEM…. refer to:
http://www.bender-de.com/en/products/system-components/cp700-compatible-devices.html
Condition
Monitor
CP700
PEM..5
PEM..3, PEM..5*
Modbus/RTU
Modbus/TCP
BMS-Bus
PC
Ethernet/TCP/IP

Product description
15
CP700_D00005_02_M_XXEN/06.2014
3.4.4 Functions available via touch screen
Display of current alarm messages including help texts
 Bus overview of the assigned devices. Indication of alarm and measured values. Indication of the
interfaces of the devices in use. In case of universal measuring devices, also the indication of the
harmonics in tabular form or as a chart. Waveform recorder and graphical representation of meas-
uring values (bar graph, phasor diagram, power triangle).
Interface settings with password protection
Operating language, selectable
3.4.5 Functions available via the web user interface
The device utilises an integrated web server which can be used to display data in a convenient way
on any PC by means of a web browser and SilverlightTM plug-in.
In addition, it provides a Modbus/TCP server which converts data of the associated devices for a
Modbus client. Also, the CP700 contains an FTP server for file access. Functions available via the web
user interface are:
Bus overview of the associated devices (max. 247 devices).
– Indication of alarm and measured values.
– Indication of the interfaces of the devices in use.
– In case of universal measuring devices, also the indication of the harmonics in tabular form
or as a chart. Waveform recorder and graphical representation of measuring values (bar
graph, phasor diagram, power triangle).
– Parameter setting
– Device failure monitoring
– The "Backup/Report" function saves measured values and settings. Saved settings from pre-
vious configurations can be compared with the current settings made on the CP700. The
saved settings can be reloaded into the CP700.
– Assignment of individual texts for devices, measuring points (channels) and alarms.
– E-mail notifications to different user groups according to a time controlled schedule in the
event of alarms and system faults. The sender's e-mail address can be entered.
– Display of virtual devices. A virtual "measuring point" is obtained by evaluating "real" meas-
ured values of devices connected to the CP700 logically or numerically.
Manage Modbus devices
– Adding/deleting devices to/from the bus overview.
– Creating a template with selected measured values
Visualisation
– Fast and simple visualisation without any programming. Measured values or alarms can be
displayed in front of a graphic (system diagram, room plan).
– Displaying an overview page. Click to jump to another view. Return to the overview page.
 From an external application (e.g. visualisation software) commands can be sent to BMS devices.
The "Modbus control commands" menu provides Modbus control commands for selected BMS
commands. These commands can be copied to the clipboard of the PC and then included in the
programming for external application.
A graphical representation for the CP700 data logger and compatible Bender devices is avail-
able. The time axis can be varied to view different periods.

Product description
16 CP700_D00005_02_M_XXEN/06.2014
System visualisation: Displaying several gateways (COM460IP, CP700) on one website. Display-
ing common alarms of the devices. Clicking on a device being displayed will open its web user
interface.
Displaying the CP700 operating manual
3.5 Software products used
MIT license (http://opensource.org/licenses/mit-license.php)
– jQuery-Scrollbar
–jQueryTimerPlugin
– jQuery NiceScroll Plugin
– jsmn JSON parser (http://zserge.bitbucket.org/jsmn.html)
FJCore and jqPlot under the MIT license (http://www.opensource.org/licenses/mit-license.php)
AES256 implementation:
– Copyright (c) 2007-2009 Ilya O. Levin, ?http://www.literatecode.com
– Other contributors: Hal Finney(modified to AES128)
Silk icons. This work is licensed under a Creative Commons Attribution 2.5 License.
[ http://creativecommons.org/licenses/by/2.5/ ]
GPLv2 license (http://www.gnu.org/licenses/old-licenses/gpl-2.0.html):
mongoose web server (https://code.google.com/p/mongoose/)
GPL 3 (http://code.google.com/p/rootaufs/)
(C) 2008 Kishore Nallan for DesignShack
(http://www.kishorelive.com) kishore.nc@… (jquery Keyboard (modified))

17
CP700_D00005_02_M_XXEN/06.2014
4. Installation, connection and commissioning
4.1 Preliminary considerations
1. Have all the questions as regards the installation been answered by the technician responsible
for the installation?
2. Do you know the BMS address to be set?
Can CP700 be operated as the master (BMS address 1)? If apart from the CP700, an alarm indi-
cator and test combination MK800 is connected to the internal bus, the CP700 must not have
address 1 (Master).
You will find more detailed information on the BMS topic, in particular about the wiring of bus
devices, in the separate document "BMS bus". You can download the document from the
download area of the website www.bender.de.
3. Does the computer network comprise a DHCP server?
Otherwise, the network data such as the IP address and netmask allocated by the person
responsible for the electrical installation have to be set manually.
4. Ask for the IP address of the NTP server, which is required for automatic time setting.
5. Are suitable PC hardware and software available for commissioning?
Minimum system requirements: 1.6-GHz prozessor/512 MB RAM/Windows XP/Vista/7/web
browser with Microsoft SilverlightTM (version 5.0 or higher).
System requirements (recommended): Dual-Core processor/1024 MB RAM/
Windows XP/Vista/7/web browser with Microsoft SilverlightTM (version 5.0 and higher)
For initial connection, the basic configuration of the CP700 is to be undertaken outside the installa-
tion, depending on the specific situation.
4.2 Installing the device
4.2.1 Essential information on mounting
Mounting is to be carried out with suitable equipment and tools according to the documenta-
tion.
The device must only be installed by appropriately qualified personnel in de-energised state.
Disconnect the switchboard cabinet from the power supply and protect the system against
accidental switch-on.
The general safety conditions as well as the prevailing national accident prevention regulations
are adhered to. Electrical installation is to be carried out according to all applicable local laws
(e.g. wire cross section, protection, PE connection).
The climatic conditions must be complied with. The device is only permitted to be used in
enclosed rooms. The device must not be exposed to direct sunlight.
If you are familiar with the configuration of computer networks, you can carry
out the connection of the CP700 yourself. Otherwise please contact your EDP
administrator!

Installation, connection and commissioning
18 CP700_D00005_02_M_XXEN/06.2014
The device must be installed on a flat surface. While tightening the screws, irregularities may
damage the display.
The ventilation holes must not be covered.
When installing the device, the permissible mounting positions are to be observed.
Take into consideration that the wall or the sheet metal of the switchboard cabinet can hold
four times the total weight of the device.
When connecting the cables it is essential to note the bending radius.
The device should be positioned in such a way that it is visible for the user and that reflexions
on the screen are avoided as far as possible.
4.2.2 Type of installation
The CP700 is preferably installed into consoles and control panel doors using the mounting brackets
supplied with the device. Strength of the material to be clamped: minimum 2 mm, maximum 6 mm.
4.2.3 Practice
1. Insert the device frontally into the prepared, plane and smooth installation cut-out. The dimen-
sions for the installation cut-outs can be found on page 161.
2. Attach the mounting brackets to the CP700. For this purpose, insert all mounting brackets into
the slots (marked with orange circles) at the CP700 and slide them down.

Installation, connection and commissioning
19
CP700_D00005_02_M_XXEN/06.2014
3. Fix the mounting brackets to the wall resp. to the sheet metal of the switchboard cabinet by
tightening the screws using a large flat-tip screwdriver. A tightening torque of approx. 0.5 Nm
is recommended.

Installation, connection and commissioning
20 CP700_D00005_02_M_XXEN/06.2014
4.3 Connection of the device
4.3.1 Overview of the bus device interfaces
Details on the items 2 and 4:
"Terminating resistor/bus bias voltage" switch for Modbus/RTU interface:
"Terminating resistor/bus bias voltage" switch for BMS interface.
Key
1Modbus/RTU interface. (cable included in the scope of delivery)
2Switch for terminating resistor/bus bias voltage for Modbus/RTU interface.
3BMS bus (Bender measuring device interface, cable included in the scope of delivery)
4Switch for BMS bus termination/bus bias voltage.
5USB interface, is not used
6Connection to the supply voltage,
"see chapter "DC 24 V power supply" on page 21
7Functional earth, see chapter "Earthing" on page 21
8USB interfaces, are not used
9Ethernet 10/100/1000, RJ45 socket for connection to a personal computer or to the local
network (hub, switch, router)
10 RS-232 interface, is not used
Communication
mode Switch position Terminating resistor/
bus bias voltage LED
MASTER left activated on
Communication
mode Switch position Terminating resistor/
bus bias voltage LED
MASTER left activated on
Slave right deactivated off
15
910
234
678