Benelli Mantus MTB User manual

USER MANUAL
Benelli Mantus MTB
This manual contains important safety, performance and service
information. Read it before you take the first ride on your new bicycle
and keep it for reference.

2
BENELLI BRAVO 2
Table of Contents
1. Preface..............................................................................................................3
1.1 Welcome ......................................................................................................3
1
1
.
.
2
2
Illustrations..................................................................................................3
2. Safety ...............................................................................................................3
3. Vehicle and parts................................................................................................4
4
4
.
.
Quick Installation Instruction ...............................................................................4
4.1 How to set up the front wheel .......................................................................5
4.2 How to set up the handlebar and display.........................................................6
4.3 How to install/remove the battery ..................................................................7
4.4 Pedal ...........................................................................................................8
4.5 Adjust the handle bar position........................................................................8
5. Check before riding .............................................................................................8
6. Riding a Mantus MTB ..........................................................................................9
7. The display .......................................................................................................10
7.1 850C button LCD color screen (LCD) ...........................................................10
7.2 ON/OFF operation .......................................................................................10
7.3 Pedal Assist Selection.................................................................................10
7.4 Speed mode and mileage mode switch ..........................................................10
7.5 Headlight switch/display mode switch ...........................................................11
8. Technical documents:........................................................................................12
8.1 Battery and Charger ...................................................................................12
8.2 Storage and Cleaning ..................................................................................13
8.3 Routine checkup and maintenance: ...............................................................14
9. Technical Parameters........................................................................................18
10. Legal documentation ......................................................................................18
10.1 Service and warranty ..................................................................................18
10.2 Warranty conditions....................................................................................19
11. Fault and troubleshooting
...............................................................................22
BENELLI BRAVO 3
fi

3
BENELLI BRAVO 2
BENELLI BRAVO 3
1. Preface
1.1 Welcome
Dear Benelli owner:
Thank you for your love of Benelli electric bicycles, and warmly welcome you to become a
Benelli user. Before you start your journey riding with the wind, please read this user
manual carefully.
1
1
.
.
2
2
Illustrations
Illustrations shown in this document may differ in detail from the exact configuration
on your particular e-bike model. The illustrations are a general reference for
instruction and description purposes only.
2. Safety
E-Bike laws differ by State - check your local laws and only ride in legally permitted
areas. Use helmets, protective gear and always ride responsibly.
Mantus MTB is suitable for hard ground roads, such as asphalt, bicycle paths or
gravel roads. When driving on public roads, please follow the traffic rules. Mantus MTB
bike is not suitable for off-road driving, otherwise it may cause unpredictable
consequences or accidents.
1) Please strictly abide by the traffic laws and regulations, prepare helmets,
protective equipment and other protective equipment before riding, and pay
attention to cycling safety.
2) It is strictly forbidden for people under the age of 16 to drive electric bicycles
on the road;
3) Don't lend electric bicycles to people who are not suitable to ride this bicycle
4) When riding in wet weathers, the braking distance will be extended;
5) Avoid traveling in bad weather such as heavy rain/snow
6) Don't touch or use metal to touch the charging port on the bike, otherwise it
will cause a short circuit.
7) Bicycles are vehicles with certain risks, break the rear wheel first, and then
the front wheel in emergency braking, especially when the cycling speed is too
high, you may fall over if you use the front brake suddenly. Please ride carefully.
8) Please consult your insurance company or insurance broker on the insurance
coverage of riding an electric bike.
9) Do not park bikes in building lobby, evacuation stairs, walkways, and safety
entrances.
10) Do not charge the bike in residential buildings, stay away from combustible,
and do not charge for prolong period of time.
11) Maximum load for this bike is 105kg.

4
BENELLI BRAVO 4
3. Vehicle and parts
Benelli Mantus MTB
1
、
Tyres
2
、
Rim
3
、
FrontHub
4
、
BrakeDisc
5
、
FrontFork
6
、
ForkHeadset
7
、
PowerSwitch
8
、
Frame
9
、
Saddle
10
、
SeatPost
11
、
SeatPostClamp
12
、
Battery
13
、
BrakeCaliper
14
、
CenterMotor
15
、
Chainwheel&Crank
16
、
Pedal
17
、
Chain
18
、
Reflector
19
、
Rearderailleur
20
、
Cassette
21
、
Speedsensor
22
、
HandleGrip
23
、
BrakeLever
24
、
Thumbshifter
25
、
Handlebar
26
、
Displayer
27
、
Stem
28
、
DisplayButton
BENELLI BRAVO 5

5
BENELLI BRAVO 4
1、Tyres2、Rim3、FrontHub
4、BrakeDisc
5、FrontFork 6、ForkHeadset 7、PowerSwitch
8、Frame
9、Saddle 10、SeatPost 11、SeatPostClamp
12、Battery
13、BrakeCaliper 14、CenterMotor 15、Chainwheel&Crank
16、Pedal
17、Chain 18、Reflector 19、Rearderailleur
20、Cassette
21、Speedsensor 22、HandleGrip 23、BrakeLever
24、Thumbshifter
25、Handlebar 26、Displayer 27、Stem
28、DisplayButton
BENELLI BRAVO 5
4
4
.
.
Quick Installation Instruction
4.1 How to set up the front wheel
1. Insert the front wheel in-between the
front fork, make sure the brake disc sits
between the brake pads
2. Take the quick release lever, slide off the
ends, and insert the lever rod through the
hub from opposite side of the brake disc.
Then, slide the spring and nut onto the rod,
tighten the nut. Continue to tighten the
nut while opening and closing the lever until
a good resistance is achieved.
3. Make sure the lever is flipped up
towards the frame to avoid snapping

6
BENELLI BRAVO
6
4.2 How to set up the handlebar and display
4. Unscrew the cap from the handlebar holding stem,
insert and adjust the position of handlebar. Then
tighten the screw back with the cap to secure the
handlebar in place.
5. Install the display on handlebar. Secure it in
place by tighten the screws
6. Then connect the blue wire on display to blue
wire on bike and green wire on display to green wire
on bike.
7. Install the control button on the left side of the
handlebar.
BENELLI BRAVO 7

7
BENELLI BRAVO 6
7. Install the control button on the left side of the
handlebar.
BENELLI BRAVO 7
4.3 How to install/remove the battery
1. Support the battery cover with your hand, as the battery might drop after the
it is unlocked.
2. Insert the key into the keyhole near the handlebar, rotate 90° counterclockwise
to unlock the battery.
3. Then insert/remove the battery. When installing the battery, first align the
bottom end of the battery with the holder, then move the upper end of the
battery closer to the holder and apply force until you hear a "click" sound.
4. The battery switch is located at the bottom, click to turn on or off the battery

8
BENELLI BRAVO 8
output.
4.4 Pedal
Pay attention to Left and Right before
installation
4.5 Adjust the handle bar position
1. Please turn the handlebar up, down, left
and right, and make sure that the handlebar
is not loose.
2. loosen the screws at
①
to adjust
handlebar alignment with the front wheel,
ensure it is perpendicular to the front wheel.
Loosen the screws at
②
to adjust the
handlebar position
3. When adjusting the height of the handlebar,
make sure that the safety wire on the stem
tube is not be exposed.
5. Check before riding
The power circuit and lighting are working.
The front and rear brake lever are working.
The handlebars are tightened.
The front & rear wheels are tightened.
BENELLI BRAVO 9

9
BENELLI BRAVO 8
①
②
BENELLI BRAVO 9
The tyre pressure is normal.
Check the reflector for contamination before cycling.
6. Riding a Mantus MTB
H
H
o
o
w
w
t
t
o
o
s
s
t
t
a
a
r
r
t
t
Press the power on/off button, the motor starts. When you sit firmly on the bike,
slowly rotate the throttle, and the bike will start moving, and then slowly accelerate.
H
H
o
o
w
w
t
t
o
o
c
c
h
h
a
a
n
n
g
g
e
e
g
g
e
e
a
a
r
r
s
s
To speed up, start with a lower gear and shift to a higher gear as you speed up
When going uphill, use a lower gear
On a flat terrain, use a higher gear
H
H
o
o
w
w
t
t
o
o
b
b
r
r
a
a
k
k
e
e
1) Release the throttle and stop pedaling.
2) squeeze the both brakes slowly and then tighten.
3) Do not brake or steer sharply. Emergency braking and sharp steering are the main
factors causing sideslip or rollover, which is extremely dangerous. If only the front or
rear wheels are braked, and the bike may slide horizontally, which is extremely
dangerous.

10
BENELLI BRAVO 10
7. The display
7.1 850C button LCD color screen (LCD)
Use function of LCD meter：
l 3.2 inch colour screen
l Speed
l battery level
l Mileage
l Time
l Headlight
l Brake
l Pedal Assist level
7.2 ON/OFF operation
1. To turn on/off the battery power, press the power button on the bike frame.
2. To turn on/off the display power, press and hold the power button on handlebar
switch for 1 second
3. The display will turn off automatically if the ebike is left idle for more than 5mins .
7.3 Pedal Assist Selection
short press the "+" or "-" button to change the Pedal Assist level. The lowest is Level 0
without any assistance, and the highest is Level 3 with maximum assistance. The
default is Level 1 when the e-bike is turned on.
7.4 Speed mode and mileage mode switch
1. short press the power button to switch the speed display information and
mileage display mode, and the following information is displayed in a loop: average
speed (AVG SPEED) →maximum speed (MAX SPEED) →real-time speed (RT
SPEED) →cruising range (RANGE)→Cumulative mileage (ODO) →riding time
(TIME) →single mileage (TRIP)
Ups
Time
Mileage
Power indi
c
ator
Gear indi
c
ation
Speed
Battery level
ON/OFF
Downshift
键
档位指示
电量显示
模式键
加档键
Pedal Assist
BENELLI BRAVO 11
※
（ ）
：

11
BENELLI BRAVO 10
：
l
l
l
l
l
l
l
l
→ →
→ → →
→
Ups
Time
Mileage
Power indi
c ator
Gear indi c ation
Speed
Battery level
ON/OFF
Downshift
键
档位指示
电量显示
模式键
加档键
Pedal Assist
BENELLI BRAVO 11
Speed mode and mileage mode switch display in
t
er
f
ace
※The meter will automatically return to the real-time speed display state after 5 seconds
7.5 Headlight switch/display mode switch
Long press the "+" button for 1 second, the indicator turns on the lights (supported
by the controller) and switches to display day/night modes. Long press the "+" button
for 1 second again, the indicator turns off the lights and switches the display mode.
Day ModeNight Mode
Walk assistance mode（6km/hr walk）
Press the “- ” button for 3 seconds, the bike enters walk-assistance mode, the
display shows the real-time speed, Pedal Assist level is P. Release the button, the
bike exits the walk assistance mode.
Brake indication：
Braking cut-off shows .

12
BENELLI BRAVO 12
8. Technical documents:
8.1 Battery and Charger
1. The battery can be charged directly in the
bike, or charged on its own.
2. Please fully charge the battery before
first use, otherwise battery life may be
reduced.
3. You can check the battery level by pressing
the display at the bottom of the battery or
the battery indicator on display.
4. Please turn off the battery when charging,
which will prolong the battery life.
5. Connect the charger to battery properly, before connecting on the wall plug
to wall socket. The red light on charger indicates the battery is charging;
while green light indicates that the battery is fully charged.
6. If the bike is not used for a long time, the power will gradually decrease due
to natural discharge. Please regularly charge the battery, before it is
exhausted.
7. if the bike will not be used for more than 1 months, the battery should be
removed from bike and stored separately. Please recharge it at least once
every three months.
8. The capacity of the battery will decrease after every re-charge. It is normal
see drop in range on a full charge after 6 months of frequent uses. Please
contact your dealer for battery replacement.
9. The operating environment is -20℃~60℃.
10. The charging time is about 2-4 hrs. Do not charge the battery for more
than 6hrs
BENELLI BRAVO 13

13
BENELLI BRAVO 12
℃ ℃
BENELLI BRAVO 13
W
W
a
a
r
r
n
n
i
i
n
n
g
g
1) The user must operate according to the instructions when charging;
2) Never use third party battery or charger for Benelli bikes.
3) When the charger is working, please place it in a safe, well ventilated place, out of
reach of children.
5) Do not leave the charger connect to AC power supply when not charging. This is
dangerous, and could cause fire hazards.
6) Do not cover the charger or adaptor when charging, please allow heat to dissipate
easily.
7) Store charger and battery in a dry, clear box when not in use, keep away from small
item that might fall inside the charging port.
8) Beware of falling and impact to avoid damage.
9) Do not disassemble or replace the parts in the charger by yourself. When
replacing the charger, use original charger that match the lithium battery model.
8.2 Storage and Cleaning
Do not use excessive water to wash the plastic. Use a soft cloth with a neutral solution to wipe
the dirt off the plastic shells. After that, wipe it dry with a clean soft cloth.
CAUTION: Do not use high-pressure water or air hoses for cleaning. It can force water into
electric components, which may cause malfunctioning.
CAUTION: Do not wash the E-bike components with excessive water. If the internal electrical
parts are infected with water, the insulator may corrode which leads to power-drain or other
problems.
CAUTION: Do not use non-neutral soap solutions to wash plastic components. Non-neutral
solutions may cause colour-change, distortion, scratching.

14
BENELLI BRAVO 14
8.3 Routine checkup and maintenance:
In order to prolong the service life of the bike and enable maintain its safety and
comfort, please check and maintain it regularly. When the bike is not used for a long
time, it should also be checked regularly. The new bike should be inspected by a
professional once the milage passes 300Km. All inspection must be carried out in a
safe and open environment. If an abnormality is found during regular inspections,
please avoid using the e-bike before the issue is resolved.
M
M
o
o
t
t
o
o
r
r
s
s
a
a
n
n
d
d
c
c
o
o
n
n
t
t
r
r
o
o
l
l
l
l
e
e
r
r
s
s
:
:
1.
R
R
e
e
g
g
u
u
l
l
a
a
r
r
l
l
y
y
r
r
e
e
m
m
o
o
v
v
e
e
d
d
i
i
r
r
t
t
f
f
r
r
o
o
m
m
t
t
h
h
e
e
l
l
i
i
d
d
s
s
o
o
n
n
b
b
o
o
t
t
h
h
s
s
i
i
d
d
e
e
s
s
o
o
f
f
t
t
h
h
e
e
m
m
o
o
t
t
o
o
r
r
to allow heat
dissipation during motor work and extend the degaussing time of the motor,
thus extending the life of the motor.
2.
R
R
e
e
g
g
u
u
l
l
a
a
r
r
l
l
y
y
i
i
n
n
s
s
p
p
e
e
c
c
t
t
a
a
n
n
d
d
t
t
i
i
g
g
h
h
t
t
e
e
n
n
t
t
h
h
e
e
c
c
o
o
v
v
e
e
r
r
s
s
c
c
r
r
e
e
w
w
s
s
a
a
n
n
d
d
n
n
u
u
t
t
s
s
at both ends of the
motor and shafts to avoid damage to the motor during riding.
3.
R
R
e
e
g
g
u
u
l
l
a
a
r
r
l
l
y
y
g
g
o
o
t
t
o
o
b
b
i
i
k
k
e
e
s
s
e
e
r
r
v
v
i
i
c
c
i
i
n
n
g
g
p
p
o
o
i
i
n
n
t
t
t
t
o
o
c
c
h
h
e
e
c
c
k
k
t
t
h
h
e
e
i
i
n
n
s
s
u
u
l
l
a
a
t
t
i
i
o
o
n
n
o
o
f
f
t
t
h
h
e
e
m
m
o
o
t
t
o
o
r
r
w
w
i
i
r
r
i
i
n
n
g
g
a
a
n
n
d
d
t
t
h
h
e
e
c
c
a
a
s
s
i
i
n
n
g
g
. If there is no insulation, find out the cause and repair it in time.
4. Regularly check whether the connecting plug-in of the controller is loose.
5. Regularly check whether the fuse box of the whole vehicle is loose, and deal with
it in time if it is loose.
6. You should start and accelerate the bike slowly to reduce the impact of high
currents on controllers, motors and lithium batteries and extend the life of
electrical components.
B
B
i
i
k
k
e
e
f
f
r
r
a
a
m
m
e
e
a
a
n
n
d
d
p
p
a
a
r
r
t
t
s
s
:
:
1. Check whether the front fork is bent or damaged,
2. Move the handlebar up and down, if there is any usual noise, please consult a
profession bike servicing center.
3. Check front and rear brakes respectively
4. Check if the gear can be changed within the range without abnormal resistance
5. Do not disassemble the bike by yourself unless you have mastered the
techniques, so as not to damage other parts.

15
BENELLI BRAVO 14
BENELLI BRAVO 15
6. Use original spare parts, otherwise it may impair the function of the bicycle or
cause damage.
T
T
y
y
r
r
e
e
:
:
1. Check the tyre pressure before riding.
2. If the tyre pressure is abnormal, check for cracks, damage and abnormal wear,
3. Stay away from stones, glass, nails or sharp objects on the ground when
riding.
4. Tyre can be hot to touch after riding.
5. Replace the tyre when more than 2/3 of the tread on tyre groove are worn
out.
C
C
h
h
a
a
i
i
n
n
a
a
d
d
j
j
u
u
s
s
t
t
m
m
e
e
n
n
t
t
:
:
A
A
d
d
j
j
u
u
s
s
t
t
m
m
e
e
n
n
t
t
s
s
s
s
h
h
o
o
u
u
l
l
d
d
o
o
n
n
l
l
y
y
b
b
e
e
p
p
e
e
r
r
f
f
o
o
r
r
m
m
e
e
d
d
w
w
i
i
t
t
h
h
p
p
r
r
o
o
p
p
e
e
r
r
t
t
o
o
o
o
l
l
s
s
b
b
y
y
a
a
t
t
r
r
a
a
i
i
n
n
e
e
d
d
m
m
e
e
c
c
h
h
a
a
n
n
i
i
c
c
.
.
P
P
l
l
e
e
a
a
s
s
e
e
c
c
o
o
n
n
s
s
u
u
l
l
t
t
p
p
r
r
o
o
f
f
e
e
s
s
s
s
i
i
o
o
n
n
a
a
l
l
b
b
i
i
k
k
e
e
s
s
h
h
o
o
p
p
s
s
i
i
f
f
y
y
o
o
u
u
a
a
r
r
e
e
u
u
n
n
s
s
u
u
r
r
e
e
,
,
i
i
n
n
c
c
o
o
r
r
r
r
e
e
c
c
t
t
c
c
h
h
a
a
i
i
n
n
a
a
d
d
j
j
u
u
s
s
t
t
m
m
e
e
n
n
t
t
c
c
a
a
n
n
c
c
a
a
u
u
s
s
e
e
i
i
n
n
j
j
u
u
r
r
i
i
e
e
s
s
w
w
h
h
e
e
n
n
r
r
i
i
d
d
i
i
n
n
g
g
.
.
H
H
o
o
w
w
t
t
o
o
c
c
h
h
e
e
c
c
k
k
t
t
h
h
e
e
c
c
h
h
a
a
i
i
n
n
:
:
To check the chain tension, hold the chain in the middle section between the front and rear
sprockets.
• Move the chain up and down to check the slack on the chain;
• There should be between 10-15 mm of vertical movement;
• If the movement is more or less, the chain tension needs to be adjusted.
H
H
o
o
w
w
t
t
o
o
a
a
d
d
j
j
u
u
s
s
t
t
t
t
h
h
e
e
c
c
h
h
a
a
i
i
n
n
:
:
P
P
l
l
e
e
a
a
s
s
e
e
c
c
o
o
n
n
s
s
u
u
l
l
t
t
p
p
r
r
o
o
f
f
e
e
s
s
s
s
i
i
o
o
n
n
a
a
l
l
b
b
i
i
k
k
e
e
s
s
h
h
o
o
p
p
s
s
i
i
f
f
y
y
o
o
u
u
a
a
r
r
e
e
u
u
n
n
s
s
u
u
r
r
e
e
,
,
i
i
n
n
c
c
o
o
r
r
r
r
e
e
c
c
t
t
c
c
h
h
a
a
i
i
n
n
a
a
d
d
j
j
u
u
s
s
t
t
m
m
e
e
n
n
t
t
c
c
a
a
n
n
c
c
a
a
u
u
s
s
e
e
i
i
n
n
j
j
u
u
r
r
i
i
e
e
s
s
w
w
h
h
e
e
n
n
r
r
i
i
d
d
i
i
n
n
g
g
.
.

16
BENELLI BRAVO 16
First loosen the rear axle nut and turn the
adjusting nut to the left or right to correct the
slack of the chain. While adjusting the chain,
you must also keep the front wheel chain
aligned with the rear. After adjustment, re-fix
the rear axle nut, lock the adjustment nut and
perform a final check to make the distance
between the two sprockets is 10-15 mm.
The open end of the chain spring should be
opposite to the chain movement direction
S
S
a
a
d
d
d
d
l
l
e
e
a
a
d
d
j
j
u
u
s
s
t
t
m
m
e
e
n
n
t
t
:
:
1. Pull the saddle to check whether the saddle is loose or skewed.
2. When adjusting the height of the saddle, pay attention to minimum and
maximum insert length.
3. Always tighten the saddle clamp after adjustment, and check the saddle before
each ride.
B
B
r
r
a
a
k
k
e
e
a
a
d
d
j
j
u
u
s
s
t
t
m
m
e
e
n
n
t
t
1. Check the condition of your brake regularly. To check, while ride normally, hold
front then rear brakes at different times. The rear wheels will lock the motion of
bike and the front wheels will quickly slow down and the bicycle will tip forward.
2. Adjust the distance between the brake pads and the rim to adjust braking
effect. Please consult professional servicing provider if unsure.
3. Replace the brake pads if they are severely worn (more than 2/3), always replace
the left and right brake pads together at the same time.
4. After adjusting the brake, be sure to tighten the brake wire fixing screws
5. Rubber brake pads should not be contaminated with any grease. If they are
contaminated with grease, their braking performance will be greatly reduced,
and they must be replaced.
Movement
direction
Chain
spring
BENELLI BRAVO 17

17
BENELLI BRAVO 16
Movement
direction
Chain
spring
BENELLI BRAVO 17
6. Disc brakes can produce a very high braking force. Sudden brake when riding
with speed can cause the whole bike to topple. Practice braking until you gain
full control of the bicycle.
7. Improper use of the additional shock-absorbing elements in the brake system
(power regulator) can cause serious accidents. The specified spring force of the
power regulator depends on the total weight of the bicycle
A
A
d
d
j
j
u
u
s
s
t
t
m
m
e
e
n
n
t
t
a
a
n
n
d
d
m
m
a
a
i
i
n
n
t
t
e
e
n
n
a
a
n
n
c
c
e
e
:
:
It is recommended to conduct a comprehensive inspection and maintenance of the
bike after the initial 300 kilometers of riding. After that, carry out a more
comprehensive inspection of the bike for every 1,000 kilometers of riding.
L
L
u
u
b
b
r
r
i
i
c
c
a
a
t
t
i
i
o
o
n
n
:
:
Appropriately lubricate the parts that need lubrication, such as chains, brake lines,
and bike supports.
DO NOT lubricate Rim surface, brake pad surface, tyre surface, electrical switch
R
R
e
e
c
c
o
o
m
m
m
m
e
e
n
n
d
d
e
e
d
d
t
t
i
i
g
g
h
h
t
t
e
e
n
n
i
i
n
n
g
g
t
t
o
o
r
r
q
q
u
u
e
e
o
o
f
f
f
f
a
a
s
s
t
t
e
e
n
n
e
e
r
r
s
s
*The above values are only reference values, please follow the attached parts
manufacturer’s
operating instructions
Parts Specifications Torque (N.m)
Crank arm M8 30
Pedals 9/16 of an inch 30
Axle, Front general 25
Axle, Rear
general
30
Stem wedge bolt
M8
23
Stem, fork end fixture
M5/M6/M7
M5:5/ M6:10/ M7:14
Stem, direction fixation device
M5/M6/M7
M5:5/ M6:10/ M7:14
Rod end, outer band
M5/M6
M5:5/ M6:10
Seat post, hoop M8/M6 M8:20/ M6:10
Seat post clamp M7/M8 M7:14/ M8:20
Brake pad
M6
10
Brake cable clamp M6 10
Brake handle clamp M5 5
V-type brakes, fastening screws M6 10
Flywheel fastens screw
None
40
Flywheel, lock ring
None
30

18
9. Te chnical Parameters
10. Legal documentation
10.1 Service and warranty
Dear user: Thank you for using the electric bicycle produced by our company. To
protect your safety and rights, please keep the manual properly.
M
M
O
O
D
D
E
E
L
L
M
M
a
a
n
n
t
t
u
u
s
s
M
M
T
T
B
B
D
D
i
i
m
m
e
e
n
n
s
s
i
i
o
o
n
n
s
s
(
(
L
L
*
*
W
W
*
*
H
H
)
)
1
1
8
8
9
9
0
0
*
*
7
7
0
0
0
0
*
*
1
1
1
1
4
4
0
0
m
m
m
m
W
W
h
h
e
e
e
e
l
l
b
b
a
a
s
s
e
e
1
1
1
1
6
6
0
0
m
m
m
m
W
W
e
e
i
i
g
g
h
h
t
t
2
2
5
5
k
k
g
g
M
M
a
a
x
x
S
S
p
p
e
e
e
e
d
d
2
2
5
5
k
k
m
m
/
/
h
h
R
R
e
e
c
c
h
h
a
a
r
r
g
g
e
e
M
M
i
i
l
l
e
e
a
a
g
g
e
e
7
7
5
5
k
k
m
m
1
1
0
0
0
0
k
k
m
m
p
p
o
o
w
w
e
e
r
r
c
c
o
o
n
n
s
s
u
u
m
m
p
p
t
t
i
i
o
o
n
n
0
0
.
.
5
5
8
8
（
（
k
k
w
w
h
h
）
）
/
/
1
1
0
0
0
0
k
k
m
m
D
D
e
e
a
a
d
d
w
w
e
e
i
i
g
g
h
h
t
t
1
1
0
0
5
5
k
k
g
g
T
T
y
y
p
p
e
e
o
o
f
f
B
B
a
a
t
t
t
t
e
e
r
r
l
l
i
i
t
t
h
h
i
i
u
u
m
m
b
b
a
a
t
t
t
t
e
e
r
r
y
y
B
B
a
a
t
t
t
t
e
e
r
r
y
y
C
C
a
a
p
p
a
a
c
c
i
i
t
t
y
y
1
1
4
4
.
.
5
5
A
A
h
h
M
M
o
o
t
t
o
o
r
r
t
t
y
y
p
p
e
e
C
C
e
e
n
n
t
t
e
e
r
r
M
M
o
o
t
t
o
o
r
r
R
R
a
a
t
t
e
e
d
d
P
P
o
o
w
w
e
e
r
r
2
2
5
5
0
0
W
W
R
R
a
a
t
t
e
e
d
d
S
S
p
p
e
e
e
e
d
d
1
1
2
2
0
0
r
r
/
/
m
m
i
i
n
n
R
R
a
a
t
t
e
e
d
d
V
V
o
o
l
l
t
t
a
a
g
g
e
e
3
3
6
6
V
V
C
C
o
o
n
n
t
t
r
r
o
o
l
l
l
l
e
e
r
r
u
u
n
n
d
d
e
e
r
r
v
v
o
o
l
l
t
t
a
a
g
g
e
e
p
p
r
r
o
o
t
t
e
e
c
c
t
t
i
i
o
o
n
n
v
v
a
a
l
l
u
u
e
e
3
3
1
1
±
±
0
0
.
.
5
5
V
V
C
C
o
o
n
n
t
t
r
r
o
o
l
l
l
l
e
e
r
r
o
o
v
v
e
e
r
r
c
c
u
u
r
r
r
r
e
e
n
n
t
t
p
p
r
r
o
o
t
t
e
e
c
c
t
t
i
i
o
o
n
n
v
v
a
a
l
l
u
u
e
e
1
1
5
5
±
±
0
0
.
.
5
5
A
A
BENELLI BRAVO 19
：

19
（（））
BENELLI BRAVO 19
M
M
a
a
i
i
n
n
t
t
e
e
n
n
a
a
n
n
c
c
e
e
a
a
n
n
d
d
p
p
r
r
e
e
c
c
a
a
u
u
t
t
i
i
o
o
n
n
s
s
：
1) Only use original parts purchased from manufacturer, authorized resellers, bike
service provider. The manufacturer will not be responsible for any loss or injuries
caused by using a third-party part.
2) It is recommended to go to the dealer or service station for a battery
maintenance after 3 months.
3) The user should not accelerate rapidly during driving, and try to avoid sudden
brakes.
4) Please do not modify the bike body, cables, electrical components, and the
structure and function of the bike without permission; unauthorized changes to
the parameters of cables and electrical components will cause deterioration of
handling performance, increased noise, failure of electrical performance and other
situations Occurs, resulting in the shortening of the life of the bike, causing safety
hazards, and the performance cannot be effectively guaranteed; the resulting
liability losses; the company is not responsible, and the user will be responsible for
it.
10.2 Warranty conditions
This warranty covers any defects in material or workmanship under normal use during
the "Warranty Period". Warranty does not cover tyres, tubes, brake pads or chains.
T
T
h
h
i
i
s
s
L
L
i
i
m
m
i
i
t
t
e
e
d
d
P
P
r
r
o
o
d
d
u
u
c
c
t
t
W
W
a
a
r
r
r
r
a
a
n
n
t
t
y
y
d
d
o
o
e
e
s
s
n
n
o
o
t
t
a
a
p
p
p
p
l
l
y
y
u
u
n
n
d
d
e
e
r
r
t
t
h
h
e
e
f
f
o
o
l
l
l
l
o
o
w
w
i
i
n
n
g
g
c
c
i
i
r
r
c
c
u
u
m
m
s
s
t
t
a
a
n
n
c
c
e
e
s
s
:
:
1. Damage caused by operating the product outside the permitted or intended
uses described by the manufacturer’s instructions
2. Damage caused by incorrect operations, such as negligent, improper
maintenance or incorrect use of the product.
3. Operation of the vehicle when it is overheating
4. Commercial use of the product, such as rental.

20
AUTHORISED
www.panmi.com.au/warranty
Email: [email protected]
BENELLI BRAVO 21
BENELLI BRAVO 20
5. The products are damaged, misused, or tampered with from the original state it
was delivered.
6. Unauthorised modifications to any part of the product, including but not
restricted to:
a. Modification to controller
b. Modification to battery
c. Modification to motor
d. Modification to charger
e. Modification to throttle
f. Modification to power system
g. Modification to suspension
h. Modification to brakes
7. The battery is un-sealed.
8. Installing performance parts or components on the vehicle that change the
original engineering.
9. Damage caused by servicing of the product (including upgrades and expansions)
performed by anyone who is not authorised by Panmi/ Benelli to perform such
services
10. Damage caused by nature or acts of God, for example, lightning strikes,
cyclones, and the like.
11. Damage caused by natural wear and tear.