Cyrusher RD100 User manual

Cyrusher Cycling Ltd. Co.
Assembly Manual
RD100 Folding Mountain Bike

1 get the bike out of box 2 prepare assemble tools
3 remove the packaging
P1

4 take off screws on top of
stem 5 take off screws on side of stem
P2
6 turn the stem with 180 degree 7 screw off the cap of stem

8 take off the stem cap
P3
8 take off the stem cap
9 put the handle bar on the stem
And screw on the cap
10 finish the handle bar assemble

11 remove the plastic protector
on disc brake of front wheel
12 remove the protector on end
of front fork
P4
14 install with quick release
and lock the wheel
13 put the front wheel under front fork,
make sure wheel center aligns with
fork holes

P5
15 distinguish the pedals, WL
means left, WR means rights,
16 assemble pedals on correct
side with wrench

17 put the saddle on seat
tube, adjust the height and
18 make sure to remove the rear
derailleur protector before riding
P6
tube, adjust the height and
lock it with the metal clamp
derailleur protector before riding
Congratulations!
You have finished
the assemble.
Ready to ride.