BenQ VM01 User manual
VM01
Speakerphone
User Manual
i
Copyright and disclaimer
Disclaimer
BenQ Corporation makes no representations or warranties, either expressed or implied,
with respect to the contents of this document. BenQ Corporation reserves the right to
revise this publication and to make changes from time to time in the contents thereof
without obligation to notify any person of such revision or changes.
Copyright
Copyright 2022 BenQ Corporation.All rights reserved. No part of this publication may
be reproduced, transmitted, transcribed, stored in a retrieval system or translated into
any language or computer language, in any form or by any means, electronic, mechanical,
magnetic, optical, chemical, manual or otherwise, without the prior written permission of
BenQ Corporation.
Typographics
Icon /
Symbol
Item Meaning
Warning
Information mainly to prevent the damage to components, data, or
personal injury caused by misuse and improper operation or be-
havior.
Tip Useful information for completing a task.
Note Supplementary information.
In this document, the steps needed to reach a menu are shown in condensed form, for
example: System > Information.
ii
Product Support
This document aims to provide the most updated and accurate information to customers,
and thus all contents may be modied from time to time without prior notice. Please visit
the website for the latest version of this document and other product information.Avail-
able les vary by model.
• Make sure your computer is connected to the Internet.
• Visit the local website from www.BenQ.com.The website layout and content may vary
by region/country.
• User manual and related document: www.BenQ.com > Business > SUPPORT > Down-
loads > model name > User Manual
• (EU only) Dismantled information:Available on the user manual download page.This
document is provided based on Regulation (EU) 2019/2021 to repair or recycle your
product.Always dcontact the local customer service for servicing within the warranty
period. If you wish to repair an out-of-warranty product, you are recommended to go
to a qualied service personnel and obtain repair parts from BenQ to ensure compati-
bility. Do not disassemble the product unless you are aware of the consequences. If you
cannot nd the dismantled information on your product, contact the local customer
service for assistance.
Table of contents
Copyright and disclaimer .......................................................................i
Product Support.....................................................................................ii
Package contents................................................................................... 1
Overview................................................................................................ 2
Charging the speaker............................................................................ 3
Battery status ................................................................................................................................. 3
Turning on and off the product ................................................................................................... 4
Connections........................................................................................... 5
Pairing and connecting Bluetooth devices ................................................................................ 5
Connecting to smartphone/PC ............................................................................................... 5
Connecting to PC/display with USB adapter........................................................................ 5
Bluetooth LED indicator behavior.......................................................................................... 5
Connecting to your device using a cable .................................................................................. 6
Operations ............................................................................................. 6
Adjusting volume level................................................................................................................... 6
Answering/Hanging up calls.......................................................................................................... 6
Product information ............................................................................. 7
Dimensions ...................................................................................................................................... 8
Troubleshooting..................................................................................... 9
05/30/22
Package contents 1
Package contents
Open the sales package and check the contents. If any item is missing or damaged, please
contact your dealer immediately.
Speakerphone
Audio cable x1 Type-A toType-C USB cable x1 USB audio dongle
QSG
Regulatory
Statements
Quick start guide Regulatory statments
•Before discarding the package, check that you haven’t left any accessories inside the box.
•Dispose of packaging materials wisely.You can recycle the cardboard carton. Consider storing the
package (if possible) for future transport of the display.
•Do not leave plastic bags within reach of young children or babies.
Overview
2
Overview
See Connections on page 5 for connection details.
1 2
8
9
46
7 5
3
Connectors
1. USB Type-C connector
2. 3.5 mm audio input/output
port
Connect to external audio
equipment.
LED indicators
3. Battery/Volume status
See Battery status on page 3
&Adjusting volume level on page
6 for details.
Buttons
4. Volume up
5. Answer/End call
See Answering/Hanging up calls
on page 6 for details.
6. Volume down
7. Bluetooth
Press to connect with Bluetooth
device. See Pairing and connect-
ing Bluetooth devices on page
5for details.
8. Mute/Unmute
Press to mute or unmute the
microphone.
9. Power
Press and hold for 2 seconds to
turn it on or off.
•USB 2.0= 5V 2A
• : Direct Current / DC
•The maximum length for the cables to be used with the USB slots are 3m (USB 2.0).
Charging the speaker 3
Charging the speaker
Plug the product into a USB power source using the provided USB cable. If the battery is
charging, the LED of the power button will be flashing.
IN/OUT 5V=2A
USB Type-A
It takes the battery about 4 hours to fully charge when not in use.A fully charged battery
can power the speaker for up to 8 hours.
To prevent the battery from running out of power, the product needs to be charged if it has not
been used for more than six months.
Battery status
To view the current battery status, short press the power button.The LEDs around the
edge of the product will light up to indicate the current battery status.
LED indicator Battery status
Battery is at 80-100% charge.
Battery is at 60-80% charge.
Charging the speaker
4
LED indicator Battery status
Battery is at 40-60% charge.
Battery is at 20-40% charge.
Battery is at 0-20% charge.
Turning on and off the product
To turn on or off the product, press and hold power button for 2 seconds.
Anytime the product is inactive for 15 minutes, it will automatically turn off.
Connections 5
Connections
Pairing and connecting Bluetooth devices
Connecting to smartphone/PC
1. Long press the Bluetooth button to turn Bluetooth on or off.
2. The Bluetooth LED flashes blue to indicate that the product is in pairing state.
3. Enable Bluetooth function on mobile phone or other devices. Select “BenQ VM01
Speakerphone” from the device list to connect with the product.
4. Once your device is successfully connected to the product, the Bluetooth LED
indicator turns solid blue.
Connecting to PC/display with USB audio dongle
1. Plug the USB audio dongle into the USB port of your PC or display.
2. The product and the USB audio dongle are pre-paired and ready to use.
Ensure that the product is set as the playback device in your operating system’s audio settings.
Resetting the product and the USB audio dongle
1. Long press and hold the Bluetooth button for 9 seconds until the Bluetooth LED
flashes white.
2. Re-plug the USB audio dongle to your PC or display.
3. Then the speakerphone and the USB audio dongle will be rebound successfully within
30 seconds.
Bluetooth LED indicator behavior
LED indicator Speaker status
Off Bluetooth off
Solid blue Connected with your device
Flashing blue Waiting for Bluetooth connection
Flashing white Waiting to pair with USB audio dongle
Connections
6
Connecting to your device using a cable
Plug the product into either a USB or audio port on your device. Set the product as the
playback device in your operating system’s audio settings.
IN/OUT 5V=2A
USB Type-A
Operations
Adjusting volume level
The speaker’s volume has a range of 10 levels. Press either the volume up or down button
to adjust the volume incrementally.
Once the speaker has reached its highest (10) volume level, it will emit a sound when the
volume up button is pushed.
Answering/Hanging up calls
When there is an incoming call, press to answer the call.
During a calling state, press to hang up the call.
When there is an incoming call, long press and hold for 3 seconds to reject the call.
Product information 7
Product information
Specications
Item Specications
VM01
Speaker Output Power 5 W
Frequency Response 150 Hz - 16 kH
Audio
Microphone 6 microphone array
Pickup Distance 5 m
Frequency 150 Hz - 8 kHz
Voice optimization Acoustic noise cancellation
Noise reduction
Connectivity
IO Port USB type C (for audio in/out & charging)
AUX 3.5 mm in/out"
Bluetooth Bluetooth 4.2 with EDR
Battery Talk Time 8 h
Wired charging 5V/2A
Mechanical Dimensions (WxHxD) 121 x 121 x 35 mm
Weight 380 g
Environment
Operating Temperature 0°C ~ 40°C
Operating Humidity 10% ~ 90%
Storage Temperature -10°C ~ 60°C
Storage Humidity 10% ~ 90%
Accessory
USB Audio Dongle x1
USB type C cable x1
Audio cable x1
QSG x1
Regulatory statement x1
Specifications and functions are subject to change without notice
Product information
8
Dimensions
Ø120
36.5
28.8
Unit: mm
Troubleshooting 9
Troubleshooting
Problem Possible cause & Solution
Unable to turn on the speaker Low or no electricity. Connect the adapter to charge.
Shut down automatically after
not using for a while
Connect the adapter to charge to make sure the electric
quantity is sufcient.
No sound • Select the correct sound source input.
• Adjust the volume of the speaker.
Unable to work with USB cable Use the original USB cable to make a call.
Unable to work with audio
cable
Use the original audio cable (4 sections) to make a call.
Buttons not responding Long press and hold the power button for 8 seconds to
reset the system.
Unable to charge the speaker The charging device is in fault or the battery is already
full. Replace it with a charging device with normal
functions.
Table of contents
Other BenQ Telephone manuals
