Bermuda Pond Skimmer User manual

Instruction Manual
Pond Skimmer
IMPORTANT: Please read this instruction manual carefully before
using this product. Keep the manual safe for future reference.

Thank you for purchasing a Bermuda Pond Skimmer. To ensure that
this product is safely and correctly used, and at its optimal performance,
please read this instruction booklet carefully before use.
Attention
1. Keep out reach of children
2. A drip loop should be installed in the
power cable to ensure that water cannot
travel down it, and into an electrical socket.
Ensure the power cable and plug are
higher than the water level in the skimmer.
3. An RCD, (of which the rated working current is not over 30mA) must be
installed when using the skimmer / pump, and the power sockets must be
connected to an Earth.
4. The pump included inside the Bermuda Pond Skimmer is designed for
outdoor, underwater use only. Do not run the pump dry.
5. Do not use this pond skimmer when there is a lot of solid sludge in the
pond, or when water temperature is higher than 40°C.
6. Always disconnect the power supply when handling, servicing or
maintaining the skimmer / pump.
7. Do not attempt to unplug or unwire the skimmer / pump with wet hands.
8. Do not carry or retrieve the skimmer / pump by the electrical cables.
9. Power cables to the skimmer / pump cannot be replaced. If damaged or
cut too short, discard the unit. Do not attempt to access the electricals
inside.
10. The depth of water in the pond must be higher than the pond skimmer,
do not use this pond skimmer when the water level is too low.
11. Only use in pond water, do not use in any any other liquid or chemicals.
Outlet is higher than
the highest water level
Drip loop

Features
- Compact, floating pond surface skimmer
- Automatically collects and filters debris
- Ideal for removing leaves and uneaten food from surface of pond
- Built-in 3,000 lph pump
- Easy to clean ad remove skimmer basket
Usage
Only suitable for outside in garden ponds.
1. Install the floating body on the skimmer and check if all components are
well installed. PLEASE NOTE that the filter cup and adjustable ring are
removable.
2. Connect the power cable to an RCD power socket as referenced on page 2.
3. Ensure a drip loop is installed on the cable as referenced on page 2.
4. The skimmer should be placed in the pond, in an area where it can float
and the water level is deep enough.You can leave the skimmer to float
freely, or tie it up to secure its position.
5. When the skimmer is floating, the regulating ring will automatically adjust
the height of the skimmer once the power is switched on. The top edge
of the skimmer will be lower than the water level and the debris such as
leaves will be drawn into the skimmer basket.
6. Remove and clear the skimmer basket regularly. ALWAYS disconnect from
the mains supply before touching the skimmer / pump.
7. If the skimmer is not being used for a long period of time, disconnect it and
keep it stored in a dry environment.

Trouble shooting
1. If the skimmer / pump are not working, unplug and check the power
connections. Consult a qualified electrician for advice on electrical
connections.
2. Inspect the power cable for signs of damage. If it is damaged it cannot be
repaired or replaced. Do not use the product and dispose of responsibly.
3. If the adjustment ring is too low or too high, check if there is dirt on the
ring or on the body. This will affect the performance of the skimmer.
Unplug the skimmer and clean immediately.
4. If debris is overflowing or not collecting in the skimmer, it is likely the
skimmer basket is full and needs emptying and cleaning.
Specifications
MODEL BER CODE VOLTAGE FREQUENCY POWER MAX. PUMP FLOW
Pond Skimmer BER0150 230V 50/60Hz 43W 3000 LPH

Floating Body
Adjustable Ring
Collection Basket
Base Support
Pump
Bottom Case
Exploded view

Guarantee
This product is guaranteed against defects in material and workmanship
for one year from the date of purchase, under normal usage.
The guarantee DOES NOT APPLY in case of improper use, negligence,
lack of maintenance or accidental damage to the pump. If the pump fails
due to a manufacturing fault within this period it will be either repaired
or replaced free of charge. Moving parts or wearable parts including the
impeller and any washers are not covered by the guarantee.
Should your Bermuda product stop working refer first to trouble shooting
and if this does not help, return the product to the place of purchase.
Liability is limited to replacement of the faulty product only. No other
costs will be reimbursed. This guarantee is not transferable and does not
affect your statutory rights.
Do not attempt to tamper with or access electrical components inside
the pump body. Doing so will invalidate the warranty.
The manufacturer or supplier shall not be responsible, or held liable
for any damages caused by defective components or materials of
this product, or for loss incurred by interruption of service, or any
consequential/incidental damages and expenses arising from the
production, sale use or misuse of this product or any other
consequential loss.
Any warranty claim must be accompanied by a valid, dated proof of
purchase. Evolution Aqua, Bermuda, its distributors and dealers shall not
be held liable for any loss of fish, plants or any other livestock as a result
of any failure or defect of this product.
The installation and use of your product outside of our recommendations
as printed in this manual may also void the warranty.