
1. Plug-in the appliance and connect the LAN-port with your LAN.
2. After the device boots, it will receive an IP
address via DHCP. This should allow you
to find it on your Windows computer under
“Network” in “Other Devices”. Click to open.
3. You can also access the hypervisor by entering
its IP address into your browser. If the device
does not receive an IP address via DHCP, the default will be 10.0.0.4. You can use
the BFDetect tool to find and manage the appliance’s IP address which can be
downloaded at: www.beronet.com/bfdetect
4. Use the following credentials to access the beroNet Hypervisor:
• Username: admin
• Password: beronet
1. Navigate to “Gateways” in the menu.
2. Select your Gateway and login using:
• Username: admin
• Password: admin
3. We recommend that you set a static IP for your Gateway.
Initial Setup:
Link the Appliance with the integrated Gateway:
More information available at: wiki.beronet.com
Power VGA USB 3.0 LAN WAN HDMI Port 4 Port 3 Port 2 Port 1
USB 2.0
Integrated Gateway
Diagram: Telephony Appliance 2.0