Bertazzoni Modern Series User manual

REF60…BBNPTC/-S
REF704BBNPTC
WWW.BERTAZZONI.COM
BERTAZZONI
EN
REFRIGERATOR
USER MANUAL
IT
FRIGORIFERO
MANUALE UTENTE

3
EN
CONTENTS
1. IMPORTANT SAFETY AND ENVIRONMENTAL INFORMATION ..............4
1.1 Safety information....................................................................................................................................................................4
1.2 Scrapping old appliances........................................................................................................................................................5
1.3 Conformity...................................................................................................................................................................................5
1.4 Energy saving.............................................................................................................................................................................5
1.5Beforefirstuse............................................................................................................................................................................5
2. USE ..............6
2.1 Using the fridge..........................................................................................................................................................................6
2.2 Using the freezer........................................................................................................................................................................6
2.3 Chiller zone drawer....................................................................................................................................................................6
2.4 Storage.........................................................................................................................................................................................7
2.5 Control panel..............................................................................................................................................................................8
3. CARE AND MAINTENANCE ......... . .10
3.1 LED light replacement instructions...................................................................................................................................10
3.2CareandCleaning.....................................................................................................................................................................10
3.3 Defrosting............................................................................................................................................................................... .. 10
3.4 Troubleshooting..................................................................................................................................................................... . 10
4. INSTALLATION INSTRUCTIONS ......... . .12
4.1 Preparing for installation.....................................................................................................................................................12
4.2 Ventilation.............................................................................................................................................................................. .. 12
4.3 Installation Instructions (sliding hinge).......................................................................................................................... . 15
4.4 Mounting the cabinet door(s)............................................................................................................................................. . 15
4.5 Installation Instruction (door on door hinge)................................................................................................................... . 17
4.6 Reversing the appliance doors.......................................................................................................................................... . 20
4.7 Ensuring the door seals correctly..................................................................................................................................... . 20
5. CARE AND SERVICE ......... . .21
5.1 Care & Service........................................................................................................................................................................ . 21

4
Thank you for purchasing this product.
In order to get the most out of your refrigerator,
please read this instruction manual carefully
before use. Keep all documentation for use at
a later date or for future owners. This product
is intended solely for residential use or similar
applications, such as:
The sta kitchen areas of shops, oces and other
working environments; on farms, by guests at
hotels, motels, bed and breakfasts (B&Bs) and
other residential-type environments.
It may be used for catering services and similar
applications, provided it is not used to store
products for retail sale.
This appliance must be used only for purposes of
foodstorage;anyotheruseisconsideredhazardous
and the manufacturer will not be held liable in the
event of such use. Also, it is recommended that you
take note of the warranty conditions.
1.1 Safety information
WARNING:
Risk of fire / Flammable materials
This appliance is not intended for use by
persons (including children) with reduced
physical, sensory or mental capabilities
or lack of experience and knowledge
unless they are supervised or have been
given instruction concerning the use of the
appliance by a person responsible for their
safety.
Children should be supervised to ensure
that they do not play with the appliance.
If the power cord is damaged, it must be
replaced by the manufacturer, its service
agent or a similarly qualified person in
order to ensure against hazards.
WARNING:
Keep ventilation openings in the enclosure
or built-in structure where the appliance is
housed free of obstructions.
WARNING:
Do not use mechanical devices or other
means to accelerate the defrosting process
unless they are recommended by the
manufacturer.
WARNING:
Do not damage the refrigerant circuit.
WARNING:
Do not use electrical appliances inside the
unit's food storage compartments unless
these are of a type recommended by the
manufacturer.
WARNING:
When positioning the appliance, make
sure that the power cord does not become
trapped or damaged.
WARNING:
Do not place multi-outlet power strips or
portable power supplies at the rear of the
appliance.
Do not store explosive substances, such as aerosol
cans with a flammable propellant, inside this
appliance.
This appliance is intended to be used in residential
and other similar applications, such as:
– sta kitchen areas in shops, oces and other
working environments;
– in farm houses and by guests at hotels, motels
and other residential type environments;
– bed and breakfast type environments;
– catering and similar non-retail applications.
Please comply with local regulations when
disposing of the appliance, due to its flammable
refrigerant and insulation-blowing gas.
If the LED lamp is damaged, it must be replaced by
the manufacturer, its service agent or a similarly
qualified person in order to ensure against hazards.
WARNING:
To prevent hazards associated with
appliance instability, the appliance must be
anchored according to the instructions.
1. IMPORTANT SAFETY AND ENVIRONMENTAL INFORMATION

5
EN
1.2 Scrapping old appliances
This appliance is marked according to European
Directive 2012/19/EU on Waste Electrical and
Electronic Equipment (WEEE).
WEEE contains both basic components (which can
be re-used) and polluting substances (which can
have negative impacts on the environment). It is
important that WEEE undergo specific treatments
in order to remove and properly dispose of all
pollutants and recover and recycle all re-usable
materials.
Individuals can play an important role in ensuring
that WEEE does not become an environmental
problem; it is essential to follow some basic rules:
- WEEE should not be treated as household waste;
- WEEE should be disposed of at the appropriate
collection points managed by the municipality or
by registered companies. In many countries, for
large WEEE, at-home pick-up may be available.
In many countries, when you buy a new appliance,
the old one may be returned to the retailer, who is
obliged to collect it free of charge on a one-to-one
basis, as long as the equipment is of an equivalent
type and has the same functions as the equipment
being supplied.
1.3 Conformity
By placing the mark on this product, we are
confirming compliance with all relevant European
safety, health and environmental requirements
which are applicable to this product by law.
1.4 Energy saving
For optimal energy saving, we recommend the
following:
• Install the appliance away from heat sources, out
of direct sunlight and in a well-ventilated room.
• Avoid putting hot food into the refrigerator,
which would raise the internal temperature, thus
causing the compressor to run continuously.
• Do not overfill the compartments, as this prevents
air from circulating properly.
• If ice should form, defrost the appliance in order
to facilitate the transfer of cold.
• In the event of an electrical power failure, it is
advisable to keep the refrigerator door closed.
• Open the appliance doors as infrequently and for
the briefest amounts of time possible.
• Do not adjust the settings to extremely cold
temperatures.
• Remove any dust that accumulates on the back
of the appliance
1.5 Before first use
You must allow the fridge to settle for at least
four hours prior to switching the power on.
It is recommended that you clean the interior of
the appliance prior to first use using a solution
of bicarbonate of soda and warm water, then
thoroughly dry the interior. The fridge may have an
odour to it at first use. This will disappear as the
appliance cools.
NOTE:
The appliance will start operating at 5°C
for the fridge and -18°C for the freezer and
work continuously until it comes down to
the correct temperatures. If the appliance
is switched o, you should allow five
minutes before switching it on again in
order to prevent unnecessary damage to
the compressor. Never store inflammable
or explosive items, strong corrosive acids
or alkalis in the appliance. This fridge cools
your food by making the inside back of the
cavity cold. It is normal for frost to build up
on this surface; it then dissipates and drains
through a small drain at the bottom, where
it evaporates harmlessly. The presence of
frost at the back does not mean that the
fridge is malfunctioning.

6
2.1 Using the fridge
>Never put liquids into the refrigerator uncovered.
>Never put hot foods into the refrigerator. Warm
food should be allowed to cool to room temperature
before being put into the refrigerator.
>Nothing should rest against the rear wall of the
refrigerator, as this will cause the formation of
frost, which will be dicult to remove, and possible
condensation problems.
>Make sure food is clean and that any excess water
is wiped o before putting it into the fridge.
>Wrap or cover food before putting it into the
fridge. This will help impede the loss of moisture,
keep food fresh and prevent unpleasant odours.
>Sort foods prior to storing. Any foods to be used
soon should be stored at the front of the shelves.
This will help to prevent deterioration, which could
occur when the door is kept open for long periods
of time.
>Do not overfill the fridge.There should be sucient
space between foods to allow cool air to circulate.
>Thawing frozen foods in the fridge compartment
will help to keep the temperature low and save
energy.
>Never store raw meats on shelves above cooked
meats or produce. This will help to prevent juices
from raw meat from contaminating other foodstus.
2.2 Using the freezer
>The freezer compartments are designed to store
frozen food only.
>Never put hot or warm foods into the freezer;
allow them to cool fully before putting them into the
freezer.
>When storing frozen food, follow the instructions
on the food packaging. If no information is provided,
foods should not be stored for longer than three
months after the purchase date.
>Store food in small packages (ideally less than 1
kg). This reduces freezing time and improves the
quality of the food after thawing.
>Wrap food before putting it into the freezer. To
stop the wrapping from sticking together, ensure it
is dry.
>Label food before freezing, with information
including type of food and dates of storage and
expiration.
>Once food is thawed, it must not be refrozen. In
order to prevent wastage, only defrost as much
food as is required.
>Bottled or canned drinks should not be stored in
the freezer compartments, as they could explode.
>The maximum amount of fresh food that can be
frozen within a 24-hour period is 2.6 kg.
>Do not attempt to freeze more than the maximum
amount.
2.3 Chiller Zone drawer
>The temperature inside the chiller drawer can be
regulated within a range of between +3°C and -3°C.
This is the ideal drawer for storing meat and fish.
2. USE

7
EN
2.4 Storage
The fridge section is for short-term food storage.
Although low temperatures can be maintained,
it is not recommended to store food for extended
periods.
The temperature can vary between the dierent
sections as the cold air circulates within the fridge.
For this reason, foods should be stored in dierent
sections according to type.
1. Butter, cheeses, etc.
2. Food in jars and bottles
3. Beverages, e.g. milk
4. Cooked food
5. Yoghurt, preserves, etc.
6. 75 cl bottles, ready-made meals, etc.
7. Fruit and vegetables
8. Fresh meat and fish / Fruit and vegetables
The fridge shelves can be moved within the
refrigerator compartment depending on storage
requirements. To move a shelf, lift up the rear
section and then pull it outwards.
To replace, slide the shelf back into the slot and
then lower the rear section.
The most energy-saving configuration requires the
drawers, door bins and shelves to be installed in
the appliance; please see the
pictures above.

8
2. USE
2.5 Control panel
1. When the appliance is switched on for the
first time, it will be operating at the following
settings: 5°C for the fridge, 0°C for the Chiller
and -18°C for the freezer. If you wish to adjust
the temperature or functions manually, use
the appropriate button to perform the desired
operation. The temperature range for the Chiller
is from -3°C to 3°C.
2. Fridge temperature adjustment: Press the
button on the left-hand side of the control panel
to adjust the temperature within a range of
between 2°C and 8°C.
3. Freezer temperature adjustment: Press the
button on the right-hand side of the control
panel to adjust the temperature within a range
of between -15°C and -25°C.
4. Chiller drawer temperature adjustment: The
button controls temperature. By pressing
on this button, you can adjust the temperature
within a range of between -3° and +3°. This
function can be turned on/o by pressing and
holding the button for three seconds (OFF is
displayed).
5. Super Cool: Press the button; the button
lights up and the fast cooling function is turned
on. The fridge automatically begins running at
a temperature setting of 2°C and continues for
24 hours, after which it returns to its normal
setting and the symbol is no longer lit.
6. Holiday Mode: Press the button; the button
lights up, the holiday function is turned on
and the whole appliance automatically begins
running at the following settings: fridge at 17°C
and freezer at -18°C.
7. Eco Mode: Press the button on the control
panel; the Eco function is turned on and the
button lights up. The fridge compartment runs
at a setting of 5°C and the freezer compartment
runs at a setting of -18°C. The Chiller works at a
setting of 3°C.
8. Super Freeze: Press the button; the button
lights up and the freezer begins to run the fast
freezing function, with a temperature setting of
-25°C. After 24 hours, the fast freezing function
quits automatically.
9. Press and hold the power button for 3 seconds
to switch o your appliance. The button lights
up and the power is shut o. The interior lamps
switch o and the compressor stops operating.
Press and hold the button for 3 seconds to
switch on your appliance. The symbol lights up
and power is restored.
10. No Frost models are equipped with a manual
defrosting function. Press and hold buttons
+ for 5 seconds to switch on the
manual defrosting function to clean the freezer
evaporator. The freezer temperature symbol
remains steadily lit. Press and hold buttons
+ for 3 seconds to switch o the manual
defrosting function. The freezer temperature
symbol goes dark.
11. Fault Display
This appliance has a "Fault Display & Alarm"
function. Once the sensors detect a fault, alerts
are shown on the temperature display; the
appliance still cools, but a professional service
engineer should be called in to check it.
F2 – Chiller sensor
F3 – Fridge compartment sensor
F4 – Freezer compartment sensor
F5 – Defrosting sensor
2E – Freezer fan/motor fault
CE– Communication fault between main board
and display panel
The above Faults are only shown on the display;
there is no audible alarm signal.

9
EN
Maximum freezer temperature exceeded alarm: If,
after the freezer reaches the set temperature, the
temperature rises to above -1°C, the alarm will
sound, accompanied by simultaneous flashing of
the freezer temperature display. Press any button to
cancel the audible alarm. The flashing will continue
until the temperature falls below -1°C.
NOTE:
The main board is located in the compressor
compartment.
Position Conditions
5°C / -18°C Summer or ambient temperature
between 25-35°C
5°C / -18°C Spring, autumn or ambient temperature
between 15-25°C
5°C / -18°C Winter or ambient temperature
between 5-15°C
Super Freezing
function Super Freeze
Super Cooling
function Super Cool

10
3. CARE AND MAINTENANCE
3.1 LED light replacement instructions
NOTE:
The LED light is intended to be non-
replaceable by the user; it needs to be
replaced by a service professional.
Lighting parameters: 12V / 10W
1. Unplug the power plug.
2. Remove the aluminium alloy trim strip on the top
of the LED surface light source, then remove the
left and right mounting screws.
Steps 1 and 2 are shown below.
3. Install the new LED light board.
4. Finally, replace the aluminium alloy trim strip.
3.2 Care and Cleaning
Always disconnect the appliance from the
mains power before performing any cleaning or
maintenance.
The fridge and freezer sections should be cleaned
using a solution of bicarbonate of soda and
lukewarm water. Do not use abrasive products
or detergents. After washing, rinse and dry
thoroughly.
Clean the shelves and door bins separately by
hand with a mild solution of washing-up liquid and
water. Do not put them in the dishwasher.
If the appliance is not going to be used for an
extended period of time, unplug and clean the
appliance. The doors should be left slightly ajar to
prevent the formation of mildew and unpleasant
odours.
3.3 Defrosting
The product has a No Frost system, which is
designed to prevent heavy build-up of ice. Under
normal conditions of use, there should be no need
to regularly defrost the freezer system.
NOTE:
If you are regularly finding a heavy build-
up of ice or puddles of water in the freezer
section, then it is likely that the door is not
sealing properly. This could be due to a
defective door seal or an incorrectly fitted
or overly heavy cabinet door panel. For
more information, see the troubleshooting
section about ice.
3.4 Troubleshooting
If you have any problems with your appliance, you
should check this troubleshooting section prior to
calling Customer Care.
If the appliance is not working, check that:
>The appliance is receiving electrical power.
>The fuses in the home are intact and the fuse in
the plug has not blown.

11
EN
>The fridge has not been turned o.
>The electrical outlet is functioning properly. To
check this, plug another electrical appliance into
it to see if the outlet is faulty.
If the appliance is working, but not very well,
check that:
>The appliance is not overloaded.
>The thermostat is set to an appropriate
temperature.
>The doors are closing properly.
>The cooling system on the back of the appliance
is clean and free of dust and is not touching the
rear wall.
>There is enough ventilation around the side and
rear walls.
If the appliance is noisy, check that:
>The appliance is level and stable.
>The side and rear walls are clear and there is
nothing resting against the appliance.
NOTE:
The coolant gas in the refrigerator may
make a slight bubbling or gurgling noise,
even when the compressor is not running.
If the appliance is beeping, check that:
>The doors are closed. An alarm will sound after a
door has been open for 60 seconds.
If ice has formed on the back wall of the fridge:
>It is normal for some ice droplets to form on the
back wall of the fridge. This does not constitute a
fault with the appliance.
>Ensure that no items inside the fridge are in
contact with the back wall.
>Check that there is some resistance when
opening the appliance door. If it opens at the
slightest touch, it may mean that the door seal
needs to be replaced.
>Check the door seal for any kinks, debris or
damage. If you notice any, and are unable to
resolve the issue yourself, contact Customer
Care so that the seal can be replaced.
>This can be due to the cabinet door(s) not being
properly fitted. If you are at all unsure, ask your
installer to check the cabinet doors.
If excessive ice has formed in the freezer:
>Check that there is some resistance when
opening the appliance door. If it opens at the
slightest touch, it may mean that the door seal
needs to be replaced.
>Check the door seal for any kinks, debris or
damage. If you notice any, and are unable to
resolve the issue yourself, contact Customer
Care so that the seal can be replaced.
>This can be due to the cabinet door(s) not being
properly fitted. If you are at all unsure, ask your
installer to check the cabinet doors.
If one or more of the LED units inside the appliance
is not working:
>Contact Customer Care to arrange a service visit.

12
4. INSTALLATION INSTRUCTIONS
4.1 Preparing for installation
This appliance must not be installed close to heat
sources, e.g. heating elements or cookers, or in a
damp location.
Seek the help of one or two other individuals
when installing this appliance. This appliance
may have sharp edges. Wear PPE appropriate to
the task and the environment.
>Use the height-adjustable feet at the front of the
appliance to ensure that the appliance is level.
>The cooling system on the back of the appliance
must not touch the rear wall. The larger the gap,
the better.
>The appliance must be installed with adequate
ventilation. Ensure that there is clearance above
the appliance to allow air to escape and that
there is space between the rear of the appliance
and the wall.
4.2 Ventilation
The main consideration when installing any
refrigeration unit into a
fitted kitchen is ventilation.
The heat removed from
the cooling compartment
needs to be dissipated
into the air around the
appliance. Incorrect
ventilation can lead to
premature compressor
failure, excessive power consumption and total
system failure, and it may invalidate the warranty
provided with the appliance. For appliances
intended to be installed inside a tall housing
cabinet, the following requirements must be met:
Do not tilt beyond 40° from the vertical.
REF603BBNPTC
REF603BBNPTC-S

13
EN
min200c
㎡
min200c
㎡
Center point
of two doors
REF604BBNPTC
REF604BBNPTC-S
REF704BBNPTC
Center point between
the two doors

14
4. INSTALLATION INSTRUCTIONS
The clearance at the rear of the appliance is
clearly shown. In order for the appliance to operate
properly, it is important that the top of the housing
cabinet not be blocked o. A channel depth of
40-50 mm is normal for most units.
A ventilation hole is required in the base of the
cabinet; this allows for air to be drawn over the
compressor and for heat exchange.
As a rule, the more air can get in and out, the
better and more eciently the product operates.
There should be an
air intake somewhere
inside the cabinet
to allow air into
flow freely in. In this
example, a base vent is
shown underneath the
refrigerator.
A cut-out should be
made in the base
beneath the fridge/
freezer and this
finished neatly around
the air vent grille.
Alternatively, a thin
section of the base can
be removed to allow
air into the unit (the
recommended size is
600 mm x 10 mm).
The top of the cabinet needs to
be vented into the room.
Recommended size of vent
opening: 500 x 30 mm
If the cabinet does not allow
air to flow freely into the room,
then a base vent or other
means of ventilation needs to
be provided to ensure a natural
flow of air.
There should be space at the
rear of the cabinet to allow
cool air to be drawn over the
condenser.
Recommended: 500 x 35 mm
min. 30 mm
Plan view of rear ventilation gap
Refrigerator
outline

15
EN
4.3 Installation Instructions (sliding
hinge)
With the help of one or two other
individuals, move the appliance
into the cabinet. There are two
metal plates at the base of the appliance. Fit the
supplied white spacers to these plates; when
finished, snap o the inverted "T" section.
1. Insert the appliance into the cabinet, placing
it on the far side with respect to the hinges,
making sure to leave a 3-5 mm gap.
2. After checking the alignment of the appliance
door and the cabinet door, mount the plastic
covers from the accessories bag.
3. Tighten the screws for the appliance's lower
part.
4. Fit the seal onto the appliance, cutting o any
excess as necessary. Mount the plastic covers
on the bottom parts.
5. Use a crosshead screwdriver to loosen the
connecting pin underneath the right middle
hinge and adjust it to screw onto the right
cabinet wall.
4.4 Mounting the cabinet door(s)
> Ensure that there is a gap of 3 to 4 mm between
the non-hinged side of the fridge and the cabinet
wall.
> Locate the slider in the bracket and mount the
slider on the cabinet door, 20 to 22 mm from
the long edge of the cabinet door, as shown in
the following image, ensuring that the slider is
positioned centrally and horizontally within the
bracket. Tighten securely by hand.
> Fill the gap on the non-hinged side with the
gasket/sealing strip provided.
> The finished look for the door sliders should be
similar to those shown in the following image,
which shows 2 sliders in place.
Ensure the appliance doors open, close and seal
properly.
Once complete, and if you are happy with the fit of
the appliance in the cabinet, bend and snap o the
parts of the white spacers marked "S", as shown by
the dotted outline.
Leave the remaining portions of the spacer covers
in place over the metal plates.
top
bottom

16
4. INSTALLATION INSTRUCTIONS
IMPORTANT
After completing the installation, check
that the appliance is secure within the
cabinet and that the door(s) close and open
properly. If there is no resistance from the
door seals when opening the door(s), then
it is probable that the appliance and/or
cabinet door(s) are not fitted properly.
Cabinet door
Seal

17
EN
4.5 Installation Instruction (door on
door hinge)
Tools and parts
Spacer for hinge A
Spacer for hinge B
Hinge cover
Crosshead screws
3.9 x 12, T20
3.9 x 16, T20
Spanner
Left cover for control-panel spacer
Right cover for control-panel spacer
Decorative strip
1. Push the appliance into the wooden cabinet;
it is better to approach the cabinet's left side
first.
NOTE:
The appliance must be plugged in before
installation.

18
4. INSTALLATION INSTRUCTIONS
2. Adjust the position of appliance, then screw
the top and bottom of the appliance into the
cabinet.
NOTE:
Please remove the tails from the white
spacers after mounting the cover for the
bottom part.
3. Screw the hinge onto the cabinet; attach the
decorative strip on the product's left side.
NOTE:
When mounting the hinge on the cabinet,
use a spacer.
4. Measure the dimensions of A and B.
top
bottom
Upper hinge cover
Junction panel
Disassemble the junction
panel before measuring

19
EN
5. Mount the junction panel onto the cabinet door.
6. Mount the appliance door on cabinet door.
The junction panel needs to
be mounted in the middle of
the cabinet door.
Mounting
base

20
4.6 Reversing the appliance doors
We recommend you seek the help of another
individual to support the doors while you perform
this operation.
1. Remove the upper right hinge cover and hinge
using a screwdriver.
2. Remove the upper door.
3. Remove the middle hinge and its connecting
pin underneath.
4. Remove the bottom door.
5. Remove the bottom right hinge and left plastic
plugs, and remount them on the opposite sides.
6. Mount the right upper hinge on the bottom left
corner and install the cover.
7. Remount the doors and hinges, working from
bottom to top (from 1-4).
4.7 Ensuring the door seals correctly
It is normal for the seal to be compressed after
the door has been reversed. With the door closed,
use a hair dryer to expand the seal and fill the gap
between the door and the body of the
appliance. Take care not to hold the hair dryer too
close to the appliance, which could damage the
seal.
A distance of approximately 10 cm should be
suitable. When completed, allow the seal and door
to cool before touching them. Once done, the seal
should remain in position.
4. INSTALLATION INSTRUCTIONS