BeSpoon OMLOX SmartAntenna User manual
© 2020 BeSpoon SAS
The copyrights in this user guide and the system described therein are owned
by the company BeSpoon SAS (hereafter also referred as "BeSpoon"). BeSpoon,
the BeSpoon logo, omlox and the omlox logo are registered trademarks. All
other brand names, product names, or trademarks belong to their respective
holders.
BeSpoon SAS, company registered at RCS de Chambéry
Registration number (SIRET) 521 277 319 00039
VAT-No. FR06521277319
Contact information: see back cover.
Proprietary Statement/Use
This document contains proprietary information of BeSpoon which may not be
used, reproduced, or disclosed to any other parties for any other purpose with-
out the express, written permission of BeSpoon. This document has been made
available as part of the license that has been granted to an authorized user of
BeSpoon software. It is intended solely for the information and use of parties
operating and maintaining the equipment described herein. Use of this docu-
mentation is subject to the terms and limitations of that license agreement. This
document describes all functionality that can be licensed for this product. Not
all functionality described in this document may be available to you depending
on your license agreement. If you are not aware of the relevant terms of your
license agreement, contact sales at BeSpoon.
Product Improvements
Continuous improvement of products is a policy of BeSpoon SAS. All specifica-
tions and designs are subject to change without notice.
Liability Disclaimer
BeSpoon takes steps to ensure that its published documentation is correct;
however, errors do occur. BeSpoon reserves the right to correct any such errors
and disclaims liability resulting there from.
Limitation of Liability
In no event shall BeSpoon, any of its licensors or anyone else involved in the
creation, production, or delivery of the accompanying product (including hard-
ware and software) be liable for any of the following (collectively referred to as
"Injuries"): injuries (including death) or damages to persons or to property, or
damages of any other kind, direct, indirect, special, exemplary, incidental or con-
sequential, including, but not limited to, loss of use, lost profits, lost revenues,
loss of data, business interruption, replacement costs, debt service or rental pay-
ments, or damages owing by you to others, whether arising out of contract, tort,
strict liability or otherwise, arising from or relating to the design, use (or inability
to use) or operation of these materials, the software, documentation, hardware,
or from any services provided by BeSpoon (whether or not BeSpoon or its licen-
sors knew or should have known of the possibility of any such Injuries) even if a
remedy set forth herein is found to have failed of its essential purpose. Some ju-
risdictions do not allow the exclusion or limitation of incidental or consequential
damages, so the above limitation or exclusion may not apply to you.
Table of contents
1. Introduction 1
2. Safety and compliance information 2
3. Specification 4
3.1. Datasheet 4
3.2. Hardware overview 5
3.3. Equipment needs 5
4. Deployment instructions 6
4.1. omlox SmartAntenna mounting (optional) 6
4.2. omlox SmartAntenna start 6
4.3. omlox SmartAntenna placement 6
4.4. omlox SmartAntenna control 7
5. Ask for support 7
1 omlox SmartAntenna User Guide
1. Introduction
omlox SmartAntenna is part of BeSpoon RTLS, a real-time locating system
which uses Ultra-Wideband (UWB) pulses for real-time 3D location of objects in
buildings in various industries.
omlox SmartAntennas are mainly used as mobile devices while omlox Satellites
are used as fixed bases in BeSpoon RTLS. In this case, the omlox Satellites are
synchronized with eachother. The mobile devices, such as omlox WTags or om-
lox SmartAntennas are tracked in two modes which can coexist: Multi-Tag Track-
ing (server-centric) and GPS-like Positioning (device-centric).
omlox SmartAntennas may also be provided as part of special mobile kits
without omlox Satellites and without server. In this case, BeSpoon RTLS works
in a particular device-centric mode, called Single Self-Positioning: only 1 omlox
mobile device is tracked, the others are used as fixed bases (then, unlike in the
main configuration, the fixed bases are not synchronized).
BeSpoon RTLS overview - main configuration
BeSpoon RTLS overview - omlox mobile kits
This document includes regulatory information, as well as a detailed hardware
specification and a description of its features.
For detailed features and user instructions regarding the complete system,
please refer to the BeSpoon RTLS documentation included in the RTLS
DELIVERY Pack. The RTLS DELIVERY Pack includes documentation and the
related software toolchain, to make the development processes easier. It
contents evolves according to BeSpoon RTLS developments.
x, y, z
x, y, z
x, y, z
device and server-centric
mobile devices location server
omlox satellites
x, y, z x, y, z
2 omlox SmartAntenna User Guide
2. Safety and compliance information
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) this device may not cause harmful interference,
and (2) this device must accept anyinterference received, including interference
that may cause undesired operation.
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed
to provide reasonable protection against harmful interference in a residential
installation.
This equipment generates, uses and can radiate radio frequency energy and, if
not installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that in-
terference will not occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which can be determined
by turning the equipment off and on, the user is encouraged to try to correct
the interference by one of the following measures:
–Reorient or relocate the receiving antenna.
–Increase the separation between the equipment and receiver.
–Connect the equipment into an outlet on a circuit different from that
to which the receiver is connected.
–Consult the dealer or an experienced radio/TV technician for help.
CAUTION
•BeSpoon RTLS equipments are configured to cover only the area inside
buildings, preventing omlox SmartAntennas and other UWB devices of the
system from emitting UWB signals outdoors.
Contact your system administrator if you are unsure as to the extent of
coverage.
•This equipment may only be operated indoors.
Operation outdoors is in violation of 47 U.S.C. 301 and could subject the
operator to serious legal penalties.
•UWB devices may not be employed for the operation of toys.
•Operation onboard an aircraft, a ship or a satellite is prohibited.
•omlox SmartAntennas and the real-time location system BeSpoon
RTLS may only be operated by qualified adult individuals. Installation
and operation in childcare facilities and other places hosting children
is prohibited.
•Any changes or modifications not expressly approved by BeSpoon
could void the user's authority to operate this equipment.
3 omlox SmartAntenna User Guide
•Opening the casing of an omlox SmartAntenna and/or replacing any of
its component is prohibited.
•omlox SmartAntennas only operate (i.e. receive and transmit UWB
signals) within a complete UWB real-time location system BeSpoon
RTLS, which must be professionally installed.
•In case omlox SmartAntennas must be disposed of, they must be
collected in compliance with Directive 2012/19/EU (Waste of Electrical
and Electronic Equipment).
4 omlox SmartAntenna User Guide
EU Conformity Declaration
PROVISORY FORMPROVISORY FORM
TO BE UPDATED WITH FINAL SCANTO BE UPDATED WITH FINAL SCAN
5 omlox SmartAntenna User Guide
3. Specification
3.1. Datasheet
•Data connections Bluetooth, UART, UWB
•Technology information
–BLE Frequency band : [2402 – 2480] MHz
Max power (EIRP) : 4dBm
–UWB Frequency band : [3250 – 4750] MHz
Max Mean power (EIRP) : -41.3dBm/MHz
•Dimensions 59 x 47 x 19 mm
•Power supply type USB C cable
•Power supply values Typ.: 5V (USB)
Min.: 4.35V
Max.: 5.5V
•Max. charging current default: 100 mA
adjustable to user requirements
•Operating temperature range -20° to 55°C
•Storage temperature range -20° to 25°C
•IP code 64
•Pre-programmed Unique ID 64 bits
•Light indicators see table below
Light indicators
Status LED Color Lighting details
Starting Point form LED
and wave form LED
3 colors
(green, orange, red)
All colors one after
another, 500ms
each
Supplied Point form LED
Orange Continuous
Temperature protection Fast blink (every
200 ms)
Scanning Wave form LED Green Slow breath
Calibrating Fast blink
Ranging Blink every 3s
6 omlox SmartAntenna User Guide
3.2. Hardware overview
front view back view
side view base view
individual label
CE certification mark
WEEE symbol – Directive 2012/19/EU
symbols
3.3. Equipment needs
BeSpoon RTLS main configuration (omlox Satellites used as fixed bases)
•Full system equipment such as defined at section 3.4. of the document
omloxSatellite_UserGuide.pdf
•Wireless charging devices
•Optional mounting screws – Type: M3 diameter, minimum length 8mm
e.g. Phillips Pozidriv Recess Countersunk Head, DIN 96 - White Zinc Steel
wave form led
(activity)
point form led
(power supply)
USB C
connector
individual
label
3 screw thread inserts
7 omlox SmartAntenna User Guide
BeSpoon RTLS mobile kits (mobile devices as fixed bases)
•At least 5 mobile devices
•Wireless charging devices and/or USB C cables
•Android tablet or smartphone
•PC (if UART transmission only)
•Optional mounting screws – Type: M3 diameter, minimum length 8mm
e.g. Phillips Pozidriv Recess Countersunk Head, DIN 96 - White Zinc Steel
4. Deployment instructions
4.1. omlox SmartAntenna mounting (optional)
If you need to fix the omlox SmartAntenna, 3 screw thread inserts are included
in the device's base.
▶ see illustration at section 3.2
Use all 3 screw thread inserts for each omlox SmartAntenna.
Warning: the equipment should not be used in places hosting children.
4.2. omlox SmartAntenna start
omlox SmartAntenna starts as soon the USB C cable is plugged and the board is
supplied with power.
▶ see table of light indicators at section 3.1
4.3. omlox SmartAntenna placement
One simple golden rule ensures the best results when it comes to the
deployment: avoid UWB signal deterioration and reflection by maximizing Line
of Sight links (LoS) among all the devices included in the system. LoS matters
among omlox Satellites for the quality of synchronization. Of course, it also
matters between omlox Satellites and SmartAntennas for the location precision.
Short animation sequences summarizing the points to pay attention to (online content)
UWB synchronization Non-Line of Sight Examples
How to place fixed devices
Dilution of precision
8 omlox SmartAntenna User Guide
4.4. omlox SmartAntenna control
omlox SmartAntennas are configured and controlled via the Web UI of BeSpoon
RTLS or via another application based on a compatible session protocol.
For more information, please refer to the corresponding documentation. It can
be either the documentation included in the RTLS DELIVERY Pack or the docu-
mentation dedicated to the compatible application.
5. Ask for support
We offer standardized as well as customized solutions. Please note that all
documents may be updated without notice to individual customers beforehand.
In case of support request, please indicate your system references.
17 rue Lac St André, bâtiment Koala
Savoie Technolac, BP10402
73372 Le Bourget du Lac CEDEX
France
+33 (0)4 58 82 88 88
www.bespoon.com
Table of contents
Other BeSpoon GPS manuals
