Bestisan SR02 User manual
User Manual
1. Read these Instructions.
2. Keep these Instructions.
3. Heed all Warnings.
4. Follow all instructions.
5. Do not use this apparatus near water.
6. Clean only with a dry cloth.
7. Do not block any ventilation openings. Install in
accordance with the manufacturer's instructions.
8. Do not install near any heat sources such as radiators,
heat registers, stoves, or other apparatus (including
amplifiers) that produce heat.
9. Do not defeat the safety purpose of the polarized or
grounding-type plug. A polarized plug has two blades
with one wider than the other. A grounding type plug
has two blades and a third grounding prong. The wide
blade or the third prong is provided for your safety.
When the provided plug does not fit into your outlet,
consult an electrician for replacement of the obsolete
outlet.
10. Protect the power cord from being walked on or pinched
particularly at plugs, convenient receptacles, and the
point where they exit from the apparatus.
11. Only use attachments/accessories specified by the
manufacturer.
12. Use only with a cart, stand, tripod, bracket, or table
specified by the manufacturer, or sold with the
13. Unplug this apparatus during lightning storms
or when unused for long periods of time.
14. Refer all servicing to qualified service personnel.
Servicing is required when the apparatus has
been maged In any way, such as power-supply
cord or plug is damaged, liquid has been spilled
or objects have fallen into the apparatus, the
apparatus has been exposed to rain or moisture,
does not operate normally, or has been dropped.
Special note: When placing your unit on a lacquered
or natural finish, protect your furniture with a cloth or
other protective materia.
FCC Warnings
WARNING: Changes or modifications to this unit not
expressly approved by the party responsible for
compliance could void the user's authority to operate
the equipment.
NOTE: The equipment has been tested and found to
comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits
are designed to provide reasonable protection ainst
harmful interference in a residential installlation. This
equipment generates, uses, and can radiate radio
frequency energy and if not installed and used in
accordance with the instructions, may cause harmful
interference to radio communications. However, there is
no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful
interference to radio or television reception, which can be
determined by turning the eauipment off and on. the user
is encouraged to try to correct the interference by one or
more of the folg measures:
Important Safety Instructions
SR02 Bookshelf Speaker PAGE 01
apparatus. When a cart is used, use
caution when moving the cart/apparatus
combination to avoid injury from tip-over.
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the eguipment into an outlet on a circuit different from that
to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
Additional Warnings
he apparatus shall not be exposed to dripping or splashing
and that no objects filled with liquids, such as vases, shall
be placed on apparatus.
Battery shall not be exposed to excessive heat such as
sunshine, fire or the light.
Caution marking is located at the rear or bottom of the
apparatus.
he marking information is located at the rear or bottom of
apparatus.
SR02 Bookshelf SpeakerPAGE 02
In The Box
Box Contents:
User Manual
User manual
RCA to RCA audio cable (1.5M / 5ft)
3.5mm-RCA audio cable (1.5M / 5ft)
Speaker connecting cable (2. 5M / 8.2ft)
Power adapter
Passive speaker
Active speaker
Speaker Controls
PAGE 03SR02 Bookshelf Speaker
3. Bass dial
4. Line in 1 input port
5. Line in 2 input port
6. Power cord
7.Speaker output
1. Master volume control / input selection
Press in to navigate between audio sources:
Line in 1 -> Line in 2 -> Bluetooth
2. LED indicator
Light Blue: Line in 1
Orange: Line in 2
Blue: Bluetooth
Red: Standby
VOLUME
MODE
+-
LED
LED Indicators
Red Standby
Optical
Bluetooth
LINE IN 1
White
Blue
Light Blue
LINE IN 2Orange
Product Description
Mode SR02
19V/1.89A
50W
Input
Power
DC IN
L R
L R
BASS
0
-4 +4
+2-2
+6-6
LINE IN 2
LINE IN 1
1
3
5
6
2
4
7
Connections
PAGE 04 SR02 Bookshelf Speaker
1. Connect the speakers with the included
speaker connecting cable.
2. Connect to power source, then the indicator is Iight.
Red line connecting red port
VOLUME
MODE
+-
LED
LED Indicators
Red Standby
Optical
Bluetooth
LINE IN 1
White
Blue
Light Blue
LINE IN 2Orange
Product Description
Mode SR02
19V/1.89A
50W
Input
Power
DC IN
L R
L R
BASS
0
-4 +4
+2-2
+6-6
LINEIN 2
LINEIN 1
Silver wire to black port
When connecting the audio cable, one-to-one correspondence is required.
If the connection is reversed, the sound quality will be affected.
PAGE 05SR02 Bookshelf Speaker
1. Press the master volume control on the active speaker to select LINE IN input.
The indicator turns to Light Blue(Line in 1) or Orange (Line in 2).
2. Using audio cable to connect audio source to the speaker.
3. Play from your device and adjust the volume accordingly.
Line in Input
VOLUME
MODE
+-
LED
LED Indicators
Red Standby
Optical
Bluetooth
LINE IN 1
White
Blue
Light Blue
LINE IN 2Orange
Product Description
Mode SR02
19V/1.89A
50W
Input
Power
DC IN
L R
L R
BASS
0
-4 +4
+2-2
+6-6
LINE IN 2
LINE IN 1
PAGE 06 SR02 Bookshelf Speaker
Pairing:
1. Turn on speaker and switch to Bluetooth mode by press the master volume control on back panel of the active speaker, The indicator turns to blue.
2. Go to setup section on your source devices (mobile phones, tablets, etc )and search for nearby Bluetooth devices, you will find "BESTISAN SR02"
in the ist.
3. Pair your device with "BESTISAN SR02".
4. Play audio tracks on your device and adjust the volume to a desired level.
5. Quick double-tap to disconnect Bluetooth.
Note:
1. Bluetooth connectivity and compatibility may be different among different source devices, depending on the software versions of source devices.
2. To enjoy the full Bluetooth functions of this product, please ensure your mobile device supports ADP and AVRCP profile.
Bluetooth Input
PAGE 07SR02 Bookshelf Speaker
Specifications
Power output:
Signal to noise ratio dB(A):
L/R: 25W + 25W
L/R: ≥95dB (A)
≤25dB (A)
LINE IN1: R/L: 500±50mV
LINE IN2: R/L: 700±50mV
Noise level:
Input sensitivity:
Bluetooth: R/L: 700±50mFFS
40HZ-20KHZ
4 inch (116mm)
Frequency response:
Bass unit:
1.25 inch (32mm)
Tweeter unit:
PAGE 08 SR02 Bookshelf Speaker
Troubleshooting
Problem Solution
No sound
Cannot connect via Bluetooth
The SR02 Bookshelf Speaker does not turn on
Check if the power indicator light is ON.
Try to turn up the volume using either the master volume control.
Ensure the audio cables are firmly connected and the input is set correctly on the speakers.
Check if there is signal output from the audio source.
Make sure the speaker is switched to Bluetooth input, in other audio input mode Bluetooth can not be paired or connected.
Effective Bluetooth transmission range is 10 meters, please make sure operation is within the range.
Try another Bluetooth device for connection.
Check if mains power is connected. or if the wall outlet is switched on.
Disconnect from any Bluetooth device by press and hold the volume dial in Bluetooth mode, then try again.
Thanks for reading!
BESTISAN
Best Artisan & Better Than Most
801 DUPONT AVE SUITE F & G, ONTARIO, CA, 91761.
Best Artisan Corp.
Version 1.0
Table of contents
Other Bestisan Speakers manuals
