Better Homes and Gardens Pine Cove 5pc table User manual

Better Homes & Gardens Pine Cove 5pc table

2
Thank you for your purchase
Thank you for your purchase!
We are pleased that you have chosen Wal-mart for your outdoor furniture
purchase. We hope that you enjoy the unmatched quality, comfort, and
style of your new patio set. Every piece is meticulously considered all the
way down to the smallest details, exclusively for you, by our world class
design team. We know you have a choice when it comes to your
patio
furniture needs, so from our team to yours, thank you for letting us be a part
of your outdoors.
Table of Contents
TableofContents.......................................................2
SafetyInformation......................................................3
SafetyInformation......................................................4
SafetyInformation......................................................5
Warranty.....................................................................5
What IsCovered......................................................5
What isNot Covered................................................6
Pre-assembly..............................................................7
PlanningAssembly..................................................7
HardwareIncluded..................................................7
Pre-assembly(continued)..........................................8
PackageContents...................................................8
Assembly....................................................................9
Assembly(continued)...............................................10
Operation..................................................................11
Operation(continued)..............................................12
Maintenance.............................................................13
Care andCleaning....................................................13
Troubleshooting.......................................................14
Care And Maintenance........................................6

Safety Information
DANGER: If the information in this manual is not
followed exactly, a re or explosion may result,
causing property damage, personal injury, or loss of
life. Save this manual for future reference.
DANGER: If you smell gas, immediately:
1. Shut off gas to the re pit.
2. Extinguish any active, open ames.
3. Open the lid of the re pit.
4. If the gas odor persists, keep away from
the re pit, and immediately call your gas
supplier or your re department.
DANGER: Improper installation, adjustment,
alteration, service,or maintenance can cause
serious injury or property damage. Read and
understand the installation, operation, and
maintenance information thoroughly before
installing or servicing equipment.
DANGER: This appliance has been tested to and
complies with the ANSI Z 21.97-2012, CSA 2.41-
2012 Outdoor decorative gas appliances. The
installation must conform to local codes, or the
absence of local codes to the National Fuel Gas
Code. ANS Z223.1. Safety precautions are essential
when any mechanical or propane fueled equipment
is involved. Follow all precautions in this manual
carefully.
DANGER:
This appliance can produce carbon monoxide which has
no odor.
Using it in an enclosed space can kill you.
Never use this appliance in an enclosed space such as a
camper, tent, car or home.
DANGER: California Proposition 65 (1986)
Proposition 65 is a California law protecting
drinking water from toxic substances that cause
cancer and birth defects. Combustion by-products
produced when using this product contain
chemicals known to the State of California to cause
cancer, birth defects, and other reproductive harm.
WARNING: Do not use for cooking.
WARNING: Do not operate, light or use this
appliance within 10 feet of walls or structures.
WARNING: Never store your LP gas tank where
temperatures can exceed 125 degrees F. Never
keep a lled LP gas tank in a hot car or car trunk.
Heat will cause the gas pressure to increase, which
may openthe reliefvalve and allow gas to escape.
Do not store a spare gas tank under or near this re
pit.
WARNING: Do not attempt to move the outdoor
re pit table when in use. Allow the outdoor re pit
table to cool before moving or storing.
WARNING: This outdoor re pit table is not to be
used in or on boats or recreational vehicles.
WARNING: This outdoor re pit table is not to be
operated by children. Carefully supervise children
when they are in the area of the appliance. Do not
leave a lit outdoor re pit table unattended,
especially aroundchildren and pets.
WARNING: This outdoor re pit table should be
thoroughly cleaned and inspected on a regular
basis. Clean and inspect the hose before
each use ofthe appliance. If there is evidence ofan
abrasion, wear, cuts, or leaks, replace with a
manufacturer specied hose before using the re
pit.
WARNING: The burner should be inspected at
least annually by a qualied service professional.
Depending on amount of use, more frequent
cleaning may be required. Do not operate until any
worn or damaged parts have been repaired or
replaced.
WARNING: Follow all leak-checking procedures
before operating. To prevent re or explosion
hazard when testing for a leak:
Always perform a leak test before lighting the
outdoor re pit table and each time the tank is
connected for use.
No smoking. Do not use or permit any possible
sources of ignition in the area while conducting
a leak test.
Conduct the leak test outdoors in a well-
ventilated area.
Do not use matches, lighters, or a ame to
check for leaks.
Do not use the outdoor re pit table until any
and all leaks are corrected.
If youare unable to stop a leak, disconnect the LP
gas supply. Call a gas appliance serviceman or
your local LP gas company.
CARBON MONOXIDE HAZARD
3

Safety Information
WARNING: Clearances to Combustible
Construction:
Sidewalls: 60” (1.5 m) from edge of table top.
Ceiling: free of obstruction.
Flooring: 0” – Can be installed on deck, slab,
oor, etc.
CAUTION: To avoid personal injury or damage to
the re pit table, at least two people are needed to
carefully place the re pit table in the upright
position.
CAUTION: The maximum inlet gas supply pressure
is 250 psi.
CAUTION: Do not use this appliance if any part has
been under water. Immediately call a gas appliance
serviceman or your local LP gas company to
inspect the appliance and to replace any part of the
control system and any gas control that has been
under water.
WARNING: LP gas tank needed to operate. Only
tanks marked "Propane" may be used.
The LP gas tank must be constructed and
marked in accordance with the Specication
for LP gas tanks of the U.S. Department of
Transportation (DOT) or the Standard for
Cylinders, Spheres and Tubes for
Transportation of Dangerous Goods and
Commission, CAN/CSA -B339.
The LP gas tank must have a listed Overlling
Prevention Device (OPD).
The LP gas tank must have a cylinder
connection device compatible with the
connection for the appliance.
LP tank must be arranged for vapor
withdrawal.
Never use an LP tank with a damaged body,
valve, collar or footing.
The LP tank should not be dropped or handled
roughly.
Tanks must be stored outdoors, out of the
reach of children and must not be stored in a
building, garage or any other enclosed area.
WARNING: For outdoor use only.
WARNING: Solid fuels should not be burned in this
re pit.
WARNING: What to do if you smell gas:
Do not try lighting any appliance.
Do not touch any electrical switch;.
Do not call any phone in your building.
Immediately call your gas supplier from a
neighbor's phone.
Follow the gas supplier's instructions.
If you cannot reach your gas supplier, call the
re department.
WARNING:
Do not store or use gasoline or other
ammable liquids or vapors in the vicinity of
this or any other appliance.
An LP cylinder not connected for use shall not
be stored in the vicinity of this or any other
appliance.
WARNING: Properly locate the gas hose out of
pathways where people may tip over it or in areas
where the hose maybe subject to accidental
damage.
WARNING:
High Surface temperatures: Children and
adults should stay away to avoid burns or
clothing ignition.
Young children should be carefully
supervised when they are in the area of the
appliance.
Clothing or other flammable materials
should not be hung from the appliance, or
placed on or near the appliance.
Any guard or other protective device
removed during servicing the appliance shall
be replaced prior to operating the appliance.
Installation and repair should be done by a
qualified service person. The appliance
should be inspected before use and at least
annually by a qualified service person. More
frequent cleaning may be required as
necessary. It is imperative that the control
compartment, burners and circulating air
passageways of the appliance are kept
clean.
NOTED:Heat output: 40000 BTU's
4

Safety Information
SET UP YOUR FURNITURE PROPERLY
Ensure that all parts are assembled properly and fully tightened as per
the instructions.
When placing in the desired location, ensure that all legs are resting on
the same surface. You may adjust the leg levelers as required to
ensure that the item stands in a rigid position.
EXAMINE YOUR FURNITURE
Examine occasionally to ensure that there are no loose parts. If loose
parts are found, they must be retightened fully before additional use.
5
Warranty
1 YEAR LIMITED WARRANTY
What is Cove ed
one

urs: Monday to Friday
Care and Maintenance
Wash the frame with a mild solution of soap and water, rinse with clean
water, and dry thoroughly.
Cushions may also be cleaned by hand with a mild solution of soap and
water. Rinse the cushion cover thoroughly and allow to drip dry. The
back cushion and pillow should be spot cleaned with a soft cloth. Do not
machine wash or tumble dry, as cushions may shrink. Do not use bleach
or solvents on fabrics. Never use cleaners that contain acid or abrasive
materials.
Use and operation:To improve the lifespan of this furniture, cover when
not use and store in a dry place in the off season.
6
Warranty
What is Not Cove ed
Cold Climates:
Table top must be stored flat (not on its edge) in a dry location where temperatures will not fall
below 32° F (0° C).
If within the stated warranty period this product is found to be defective in material or
workmanship the purchaser must contact the customer service department at 1-877-931-7378.
Email: [e-mail]. Customer Service ho
for freight and packaging
tomer’s responsibility
consequential damages.
y other incidental or
includes time for
s warranty. Exclusion also
This warranty excludes: furniture used for commercial use contract or other non-residential
purposes freight damage furniture damaged by acts of nature abuse or lack of proper care
vandalism or improper assembly. Discoloration or fading of straps or fabric or finish as a result of
chemicals or spills is not covered. Glass tile and stone are not covered against breakage;
frames and hardware are not covered against corrosion or rusting and/or rust stains are not
covered.In addition purchased parts are not covered under thi
loss of use inconvenience travel packaging or an
If the product is not warranted it remains the cus
charges to and from our service center.
9:00AM-5PM CST

BOLT
60 minutes for two people to complete the assembly.
BOLT
Pre-Assembly
PLANNING ASSEMBLY
Toprevent damage, place all parts on a soft surface during assembly.
Remove all protective caps before beginning assembly. It takes about
NOTED:Hardware not shown
to actual size.
NOTED:Hardware not shown
to actual size.
HARDWARE INCLUDEDHARDWARE INCLUDED

















   
AAM6x1512 
BBM6x224
CCM8x282
DDM6x124
EE2
FF20
GG20
HH2
I I2
JJ2



BOLT
BOLT
METAL WASHER
METAL WASHER
PLASTIC BOLT CAP
ALLEN WRENCH
PLASTIC WASHER
M6
M6
M8
M8
M8
Part Description Size (mm) Quantity
7
PLASTIC BOLT CAP

Pre-assembly (continued)
PACKAGE CONTENTS
8
Safety Information

Every bolt needs to be used with a washer.



A
B
C
D
E
F
G
H
I
J
K
L
M





COVER 1
FIRE BOWL 1
GRANITE TOP 12
TABLE RIM 1
BACK PANEL 1
RIGHT PANEL 1
LEFT PANEL 1
FRONT PANEL 1
TANK SUPPORT 1
SUPPORT BRACKET 1
TANK STRAP 1
LAVA ROCK 4.5kg
CHAIN1
Part Description Quantity
NBELT 1
N

Assembly
1 2
□
□
□

Attaching the Panels
□
.
,
□
.
Attaching table base to the
table rim
Attach the tank support “I” to the front panel “H” using
Attach the right and left panels “F and G” to the back
Attach the support bracket “J” to the left and right panels
the four bolts “BB” and metal washers “FF”.
panel “E” using four bolts “AA” and metal washers “FF”.
“F and G” using four bolts AA” and metal washers “FF”.
Place the table rim “D” face down on a soft flat surface.
Attach the left and right panels “F and G to the table rim “D”
Using the Allen wrench “II”, tighten all the bolts in a cross x
Turn the table into the upright position.
Insert the front panel “H” in between the right and left panels
Using the Allen wrench “II”, tighten all the bolts. Cover the
using the four bolts “AA” and metal washers “FF”.
□
pattern to ensure that the table sits flush on the floor.
Cover all the bolts with the plastic bolt caps “GG”.
□
□
“F and G”. Attach the two Allen bolts “CC”, metal washers
“EE” and plastic washers “JJ” in the order of bolt “CC”, washer
“EE”, right panel “F”, plastic washer “JJ” and front panel “H”.
Repeat sequence for left panel “G”.
□
bolts with the plastic Allen bolt caps “HH”.
CAUTION: Do not fully tighten bolts until
indicated in step 2.
9


Assembly (continued)
3
□
□
Attaching the bowl
□
□
Remove any remaining packaging from the table rim “D”
Attach the control switch from the fire bowl to the left
Place the lava rock “L” in the fire bowl “B”. Make sure it
Open the front panel “H” and attach it to the left panel
and the fire bowl “B”.Clean out any remaining packaging
debris from the inside of the bowl.
panel “G” using the four bolts “DD” and metal washers
“FF”. Tighten all the bolts using the Allen wrench “II”.
Cover the bolts with the plastic bolt caps “GG”.
is evenly distributed and does not block the burner holes.
“G”, using the chain “M”.
Completing the assembly
Place the granite tops “C” into the table rim “D”
Place the cover “A” on the fire bowl “B” when not in use.
4
□
□
10


Operation
1 2
□Open the drawer and place the 20 pound gas tank
on the tank support (I).
□Secure the tank on the base by using the tank strap
(K). Attach the tank strap to the hook on the drawer
panel (H).
□Close the drawer (H).
NOTE: To operate, you will need a standard 20
pound propane tank.
WARNING: Follow all leak-checking procedures
before operating. To prevent fire or explosion
hazard when testing for a leak:
Always perform a leak test before lighting the
outdoor fire pit table and each time the tank is
connected for use.
No smoking. Do not use or permit any possible
sources of ignition in the area while conducting
a leak test.
Conduct the leak test outdoors in a well-
ventilated area.
Do not use matches, lighters, or a flame to
check for leaks.
Do not use the outdoor fire pit table until any
and all leaks are corrected.
If you are unable to stop a leak, disconnect the LP
gas supply. Call a gas appliance serviceman or
your local LP gas company.
Installing the LP gas tank Checking for leaks
11
connections of the metal corrugated pipe.
Apply several drops of solution on the two
connets to the control pipe.
Apply several drops of solution where the hose
□Mix two to three ounces of a soapy solution to check
for leaks. Use one part liquid dishwashing detergent
and three parts water.
□Apply several drops of solution where the hose
attaches to the regulator.
□Apply several drops of solution where the regulator
connects to the cylinder.
□Make sure all fire pit and ignition valves are off.
□Turn the cylinder valve on.
□If any soap bubbles are visible where the solution has
been applied, the connections must be tightened
another turn and the leak check must be performed
again.
NOTE: If burner fails to remain lit, close all
valves and wait 5 minutes before attempting to
light the fire pit again.
□
□

Operation (continued)
3 Lighting the fire pit
Make sure the "OFF" on the control knob is in line with
the "OFF" on the panel "G"
Turn the Ignition switch counterclockwise, and put the
battery in it, make sure the positive outward.
Open the panel "H" and fully open the LP cylinder valve.
Push in the gas control knob and turn counterclockwise
and depress the lgnition switch to ignite the fire pit. If
needed,keep depressing the lgnition switch and turning
the control knob counterclockwise until the burner lights.
You should hear a clicking sound.
Once the fire pit is ignited,push in the control knob and
turn conterclockwise to increase the flame, and turn
clockwise without pushing in to decrease the flame.
To turn off the fire pit,open the panel "H" and fully close
the LP cylinder valve.
12
NOTE:
WARNING: Be careful when attempting to
manually ignite this fire pit. Improper igniting
procedure may cause injury or property
damage.
When fire pit is on: The burner will
display blue and yellow flames. These flames
should not be yellow or produce thick black
smoke. This would indicate an obstruction of
airflow through the burners. The flames should
be blue with straight yellow tops. If excessive
yellow flames are detected, turn off the burner
and consult “Troubleshooting” on page 14.

Maintenance
□Air flow through the fire pit must remain unobstructed. Keep ventilation openings, controls, burner, and air
passages clean and clear of debris. Signs of possible blockage include the following:
oGas odor with extreme yellow tipping of flame.
oFire pit does not reach the desired temperature.
oFire pit glow is excessively uneven.
oFire pit makes popping noises.
□Spiders and insects can nest in the burner or other openings. This dangerous condition can damage the fire pit
and render it unsafe for use. Clean burner holes using a heavy-duty pipe cleaner. Compressed air may help clear
away smaller particles.
□Carbon deposits may create a fire hazard. Clean the dome and burner screen with warm soapy water if
any carbon deposits develop.
Care and Cleaning
To enjoy years of outstanding performance from your fire pit, make sure you perform the following maintenance activities
on a regular basis:
Keep exterior surfaces clean.
oUse warm soapy water for cleaning. Never use flammable or corrosive cleaning agents.
oWhile cleaning your unit, be sure to keep the area around the burner dry at all times.
oDo not submerge the control valve assembly. If the gas control is submerged in water, do NOT use it
again. It must be replaced.
Keep the appliance area clear and free from combustible materials, gasoline, and other flammable vapors and
liquids.
Do not obstruct the flow of combustion and ventilation air.
Clean burner holes by using a heavy duty pipe cleaner. Compressed air may help clear away smaller particles.
Storage BETWEEN USES
Turn the control knob OFF.
Disconnect the LP source.
Store the fire pit upright in an area sheltered from direct contact with inclement weather (such as rain,
sleet, hail, snow, dust, and debris).
If desired, cover the fire pit to protect the exterior surfaces and to help prevent build-up in air passages.
NOTE: Wait until the fire pit is cool before
covering.
During periods of extended inactivity or when transporting
Turn the control knob OFF.
Disconnect the LP source, and move it to a secure, well-ventilated location outdoors.
Store the fire pit upright in an area sheltered from direct contact with inclement weather (such as rain,
sleet, hail, snow, dust and debris).
If desired, cover fire pit to protect exterior surfaces and to help prevent build-up in air passages.
WARNING: Never leave LP cylinder exposed
to direct sunlight or excessive heat. Wait until
the fire pit is cool before covering.
CAUTION: Always the allow fire pit to cool
before attempting service.
Service
Only a qualified service person should repair gas passages and associated components.
13

Troubleshooting
PROBLEM POSSIBLE CAUSE CORRECTIVE ACTION
The burner will not light. □The propane cylinder is
frosted over.
□An opening is blocked.
□The control knob is not in the
ON position.
□There may be too much lava
rock covering the burner bowl
or small pieces may be
blocking the burner holes.
□Wait until the propane cylinder
warms up and becomes
unfrosted.
□Clear the blockage.
□Turn the control knob to ON.
□Remove a portion of the lava
rock.
The burner flame is too low. □The gas pressure is low.
□The outdoor temperature is
less than 40°F, and the tank is
less than ¼ full.
□Turn the cylinder valve off and
replace the cylinder.
□Use a full propane cylinder.
□Check the burner and
openings for blockage.
Carbon build-up and/or thick black
smoke is present.
□There is dirt or film on the
reflector and burner screen.
□The burner is blocked.
□Clean the reflector and burner
screen.
□Remove any blockage, and
clean the burner inside and
outside.
14