BIG FURNITURE WAREHOUSE BRUNEL G-BNLSIDMNG User manual

BRUNEL SIDEBOARD
ASSEMBLY INSTRUCTIONS
Thank you for purchasing the BRUNEL SIDEBOARD. Please read
the instructions carefully to ensure safe operation of the product.
Size: W 800 X D 400 X H 858
PLEASE READ this sheet prior to assembly to familiarise yourself with the various stages of construction.
Carefully open the pack supplied and check the contents against the parts and fittings check list. Do not destroy any of
the packaging until you are certain that you have all the necessary parts for the assembly.
CAUTION: There are small components used in the construction of this unit. These loose items should be kept away
form young children whilst assembling your unit to avoid the danger of choking hazards.
Tools Required
X 2 2Hour
Set Up
V1 02/20
Page 1 of 20

IMPORTANT - READ CAREFULLY - RETAIN THESE INSTRUCTIONS
FOR FUTURE REFERENCE.
V1 02/20
Page 2 of 20
BRUNEL SIDEBOARD
ASSEMBLY INSTRUCTIONS
INFORMATION
•Due to the size of this product we recommend that it is assembled in the room
intended for use.
•When you are ready to start, make sure that you have the right tools, plenty of
space and a clean, dry area for assembly.
•Unwrap all packaging materials and place the components on top of the carton
box or on a clean floor to prevent it from scratching.
•Check the pack and make sure you have all the parts listed.
•Ensure that this product is fully assembled and secured as illustrated before use.
•Check all screws or bolts are tightened and inspect regularly.
•This product should only be used on firm, level ground.
•Please dismantle for transportation.
•Tools not included.
WARNING
•Keep small parts out of reach of children.
•Make sure the legs remain in contact with the ground.
•DO NOT use power tools to construct this product.
•DO NOT tighten screws until fully assembled.
•DO NOT over tighten screws or bolts.
•DO NOT use this product if parts are missing, damaged or worn.
•DO NOT stand on the product.
•DO NOT place hot objects directly onto the surface. Always use a heat resistant
mat.
•Wipe Up any accidental spillage with a soft absorbent cloth.
•Please pay particular attention when children or animals are present to ensure
that no accidental entrapment occurs whilst operating this product.
•Incorrect installation could lead to injury, take care following instruction.
•It is essential that the unit is fitted to the wall with the Anti tilt brackets provided
for safety reasons .NB Wall fixings are not included. Please source suitable
fixings for your wall type. If in doubt please consult a qualified tradesperson.
•Always ensure area to be drilled is free from hidden electrical wires ,water or gas
pipes.
CARE INFORMATION
•Never use scourers, abrasives or chemical cleaners.
•To clean wipe with a sponge and warm soapy water. Do not use solvent based
cleaners or detergents as they can bleach or damage the product.

Please check the pack contents before assembling the product. If any components are missing, please
contact your retailer. The fittings pack contains small items that should be kept away from small children.
V1 02/20
Page 3 of 20
(P1)
(P3)
(P5)
(P2)
(P4)
(P8)
(P12)
(P9)
(P11)
(P10)
(P7)
(P17)
(P19)
(P14)
(P18)
(P13)
(P13)
(P16)
(P15)
(P6)
BRUNEL SIDEBOARD
ASSEMBLY INSTRUCTIONS

Parts
TOP FRAME & TOP PANEL
1PC
Carton No: 1
P1
SIDE FRAME LEFT
1PC
Carton No: 1
P2 P3
P5 P6
SIDE FRAME RIGHT
1PC
Carton No: 1
SHELF PANEL
1PC
Carton No: 1
P10
FRONT RAIL
1PC
Carton No: 1
P11 P12
BACK PANEL
2PCS
Carton No: 1
BOTTOM PANEL
1PC
Carton No: 1
P7
SIDE PANEL LEFT
1PC
Carton No: 1
P8
SIDE PANEL RIGHT
1PC
Carton No: 1
P9
BACK SUPPORT
1PC
Carton No: 1
TOP SHELF
1PC
Carton No: 1
BOTTOM SUPPORT
2PCS
Carton No: 1
P4
BRUNEL SIDEBOARD
ASSEMBLY INSTRUCTIONS
V1 02/20
Page 4 of 20

Parts
DOOR
2PCS
Carton No: 1
P13
DRAWER FRONT
1PC
Carton No: 1
P14
DRAWER BACK
1PC
Carton No: 1
P15 P16
V1 02/20
Page 5 of 20
P17
DRAWER SIDE RIGHT
1PC
Carton No: 1
P18
DRAWER SUPPORT
1PC
Carton No: 1
DRAWER SIDE LEFT
1PC
Carton No: 1
DRAWER BOTTOM
1PC
Carton No: 1
P19
BRUNEL SIDEBOARD
ASSEMBLY INSTRUCTIONS

10 20 30 40 50 60 70 80 90 100 110 120
Fixings (to scale)
Ref Dimensions Qty
H1 4
H2 16
H3
JCBCW SCREW M6 X 50MM
5
H4
JCBC SCREW M6 X 15MM
36
H5 4
CAUTION: There are many small components used in the construction of this product. Please keep
these components away from young children whilst assembling this product.
If you keep the fittings in a bowl during assembly you will be less likely to lose them
V1 02/20
Page 6 of 20
H6 14
H7 11
H8 11
CAM BOLT
CSK SCREW M4 X 38MM
CSK SCREW M3.5 X 16MM
HANDLE SCREW M4 X 19MM
DOWEL M8 X 25MM
CAM NUT 15MM
H13 2
PAN HEAD C/B M4 X 30MM
H15 6
PAN HEAD C/B M3.5 X 16MM
H16 2FLAT WASHER M6 X 16MM
BRUNEL SIDEBOARD
ASSEMBLY INSTRUCTIONS

(Not to scale)
Ref Dimensions Qty
H9 M4 ALLEN KEY 1
H10 METAL HANDLE 4
H11 DRAWER SLIDER 12" 1
H12 1
DRAWER SLIDER 12"
L
R
L
R
H14 HINGES 7/8" 4
H18 L SHAPE BACKPLY
STOPPER 4
CAUTION: There are many small components used in the construction of this product. Please keep
these components away from young children whilst assembling this product.
If you keep the fittings in a bowl during assembly you will be less likely to lose them
V1 02/20
Page 7 of 20
H19 L BRACKET 2
H20 3MM PVH 1
H17 SHELF SUPPORT 4
BRUNEL SIDEBOARD
ASSEMBLY INSTRUCTIONS

V1 02/20
Page 8 of 20
BRUNEL SIDEBOARD
ASSEMBLY INSTRUCTIONS

STEP 1 Parts
Required
(P6)
Top Shelf - 1pc
(P8)
Side Panel Left
- 1pc
(P9)
Side Panel Right
- 1pc
(P11)
Front Rail - 1pc
(P14)
Drawer Front
- 1pc
(P16)
Drawer Side Left
- 1pc
(P17)
Drawer Side Right
- 1pc
(P18)
Drawer Support
- 1pc
(H6)
Dowel M8x25mm
- 14pcs
(H7)
Cam Nut 15mm
- 11pcs
(H8)
Cam Bolt - 11pcs
(H17)
Shelf Support
- 4pcs
V1 02/20
Page 9 of 20
(H8)
(H7)
(P6)
(P8)
(P9)
(P11)
(P14)
(P16)
(P18)
(P17)
(H17)
(H17)
(H17)
(H7)
(H7)
(H7)
(H7)
(H7)
(H8)
(H8)
(H8)
(H8)
(H6)
(H6)
(H6)
(H6)
(H6)
(H6)
BRUNEL SIDEBOARD
ASSEMBLY INSTRUCTIONS
(H7)
Refer to page 8

Parts
Required
STEP 3 Parts
Required
STEP 2
(P8)
Side Panel Left
- 1pc
(P9)
Side Panel Right
- 1pc
(H4)
CSK Screw
M3.5x16mm
- 6pcs
(H11)
Drawer Slider 12"
L / R - 1pc
(P8)
Side Panel Left
- 1pc
(P9)
Side Panel Right
- 1pc
(P11)
Front Rail - 1pc
(H4)
(H11)
(P8)
(P9)
(P8)
(P11)
(P9)
V1 02/20
Page 10 of 20
BRUNEL SIDEBOARD
ASSEMBLY INSTRUCTIONS
Unlock Lock
Refer to page 8

V1 02/20
Page 11 of 20
Parts
Required
STEP 5 Parts
Required
STEP 4
(P7)
Bottom Panel
- 1pc
(P8)
Side Panel Left
- 1pc
(P9)
Side Panel Right
- 1pc
(H1)
JCBCW Screw
M6x50mm - 4pcs
(H9)
M4 Allen Key
- 1pc
(P7)
Bottom Panel
- 1pc
(P8)
Side Panel Left
- 1pc
(P9)
Side Panel Right
- 1pc
(P12)
Back Panel - 2pcs
(H20)
3mm PVH - 1pc
(H9)
(H1)
(P8)
(P9)
(P7)
(H20)
(P12) (P12)
(P9)
(P8)
(P7)
BRUNEL SIDEBOARD
ASSEMBLY INSTRUCTIONS

Parts
Required
STEP 6 Parts
Required
STEP 7
V1 02/20
Page 12 of 20
(P12)
Back Panel
- 2pcs
(H4)
CSK Screw
M3.5x16mm
- 8pcs
(H18)
L Shape Backply
Stopper - 4pcs
(P9)
(P12)
(P6)
(P8)
(P6)
Top Shelf - 1pc
(P8)
Side Panel Left
- 1pc
(P9)
Side Panel Right
- 1pc
(P12)
Back Panel - 2pcs
(H18)
(H18)
(H18)
(H18)
(H18)
(H4)
(H4)
BRUNEL SIDEBOARD
ASSEMBLY INSTRUCTIONS
Unlock Lock
Refer to page 8

Parts
Required
Parts
Required
(P2)
Side Frame Left
- 1pc
(P3)
Side Frame Right
- 1pc
(P4)
Bottom Support
- 2pcs
(P5)
Back Support
- 1pc
(H2)
JCBC Screw
M6x15mm - 6pcs
(H9)
M4 Allen Key
- 1pc
(P4)
Bottom Support
- 2pcs
(P7)
Bottom Panel
- 1pc
(H2)
JCBC Screw
M6x15mm - 6pcs
(H9)
M4 Allen Key
- 1pc
STEP 8
STEP 9
V1 02/20
Page 13 of 20
Bottom
View
(P2)
(P3)
(P5)
(P4)
(P4)
(H2)
(H9)
BRUNEL SIDEBOARD
ASSEMBLY INSTRUCTIONS
(P4)
(P7)
(H2)
(H9)
(P4)
(P2)
(P3)
(P7)
(H2)
(H2)
(H2)
(H2)
(H2)
(H2)
(H2)
(H2)
(H2)
(H2)
(H2)
(H2)
TIP : Do not fully tighten
all H2 screws until Cabinet
assembly is in place and aligned.
TIP : Do not fully tighten
all H2 screw until
frame fully assembled.

Parts
Required
Parts
Required
(P1)
Top Frame &
Top Panel - 1pc
(P2)
Side Frame Left
- 1pc
(P3)
Side Frame Right
- 1pc
(H2)
JCBC Screw
M6x15mm - 4pcs
(H9)
M4 Allen Key
- 1pc
(P5)
Back Support
- 1pc
(P6)
Top Shelf - 1pc
(H13)
Pan Head C/B
M4x30mm
- 2pcs
STEP 10
V1 02/20
Page 14 of 20
(P1)
(P3)
(P2)
(H2)
(H9)
(P5)
(H13)
(P6)
(P5)
(P3)
BRUNEL SIDEBOARD
ASSEMBLY INSTRUCTIONS
STEP 11
(H2)
(H2)
(H2)

Parts
Required
Parts
Required
(P8)
Side Panel Left
- 1pc
(P9)
Side Panel Right
- 1pc
(P13)
Door - 2pcs
(H4)
CSK Screw
M3.5x16mm
- 16pcs
(H5)
Handle Screw
M4x19mm
- 2pcs
(H10)
Metal Handle
- 2pcs
(H14)
Hinges 7/8"
- 2pcs
STEP 12
V1 02/20
Page 15 of 20
(P13) (P8)
(H4)
(H4)
(H14)
(H10)
(H5)
(P13)
P10
H17
(P10)
(P9)
(P8)
(P10)
Shelf Panel - 1pc
(H10)
(H5)
(H10)
(H5)
(P13)
(P13)
(P8)
(P9)
(P9)
BRUNEL SIDEBOARD
ASSEMBLY INSTRUCTIONS
STEP 13
Refer to page 8
Bottom
View
(P9)(P8)

Parts
Required
Parts
Required
(P17)
(P16)
(P15)
(P15)
Drawer Back
- 1pc
(P16)
Drawer Side Left
- 1pc
(P17)
Drawer Side Right
- 1pc
(H3)
CSK Screw
M4x38mm
- 4pcs
STEP 14
STEP 15
V1 02/20
Page 16 of 20
(H3)
(H3)
(P15)
Drawer Back
- 1pc
(P16)
Drawer Side Left
- 1pc
(P17)
Drawer Side Right
- 1pc
(P18)
Drawer Support
- 1pc
(P19)
Drawer Bottom
- 1pc
(H3)
CSK Screw
M4x38mm
- 1pc
(P15) (P17)
(P19)
(P16)
(H3)
(P18)
BRUNEL SIDEBOARD
ASSEMBLY INSTRUCTIONS

STEP 16
V1 02/20
Page 17 of 20
(P14)
Drawer Front
- 1pc
(P16)
Drawer Side Left
- 1pc
(P17)
Drawer Side Right
- 1pc
(P18)
Drawer Support
- 1pc
(P19)
Drawer Bottom
- 1pc
Parts
Required
Parts
Required
(H4)
(H12)
(P17)
(P16)
(P16)
Drawer Side Left
- 1pc
(P17)
Drawer Side Right
- 1pc
(H4)
CSK Screw
M3.5x16mm
- 6pcs
(H12)
Drawer Slider 12"
L / R - 1pc
(P14)
(P17)
(P16)
(P18)
(P19)
STEP 17
BRUNEL SIDEBOARD
ASSEMBLY INSTRUCTIONS
Unlock Lock
Refer to page 8

Parts
Required
(H10)
(H5)
(P14)
(P14)
Drawer Front
- 1pc
(H5)
Handle Screw
M4x19mm - 2pcs
(H10)
Metal Handle
- 2pcs
Parts
Required
(H10)
(H10)
(P14)
BRUNEL SIDEBOARD
ASSEMBLY INSTRUCTIONS
V1 02/20
Page 18 of 20
STEP 18
STEP 19
(H5)
(H5)

STEP 20 Parts
Required
STEP 1
BOTTOM VIEW
STEP 2
FRONT VIEW
(P1)
Top Frame - 1pc
(H15)
Pan Head C/B
M3.5x16mm
- 6pcs
(H16)
Flat Washer
M6x16mm - 2pcs
(H19)
L Bracket - 2pcs
(P1)
(H19)
(H16)
(P1)
(H19)
(H15)
BRUNEL SIDEBOARD
ASSEMBLY INSTRUCTIONS
(H15)
V1 02/20
Page 19 of 20

A- Width - 800mm
B- Depth - 400mm
C- Height - 858mm
D- Bottom Height - 100mm
OVERALL DIMENSIONS COMMENTS:
Sideboard Dimensions Template:
Keep instructions for future reference
Complete Assembly
Periodically check to ensure that the components are in their proper position, free from damage.
Also, make sure the end of connectors are tight and secure.
V1 02/20
Page 20 of 20
BRUNEL SIDEBOARD
ASSEMBLY INSTRUCTIONS
A
C
D
B