BIG FURNITURE WAREHOUSE ASHBOURNE G-ASH2DBGRY User manual

Thank you for purchasing the ashbourne 2 drawer bedside Please read the
instructions carefully to ensure safe operation product.
ASHBOURNE 2 DRAWER BEDSIDE
Size :480 X 350MM X 560MM
Colour : Dark Grey
page 1 of 9
PLEASE READ this sheet prior to assembly to familiarise yourself with the various stages of construction.
Carefully open the pack supplied and check the contents against the parts and fittings check list. Do not
destroy any of the packaging until you are certain that you have all the necessary parts for the assembly.
CAUTION: There are small components used in the construction of this unit. These loose items should be
kept away from young children whilst assembling your unit to avoid the danger of choking hazards.
Tools Required
NOT INCLUDED
V1 03/19
0.2
1

IMPORTANT - READ CAREFULLY - RETAIN THESE INSTRUCTIONS FOR
FUTURE REFERENCE.
INFORMATION
The drawers of this Unit are designed to hold a maximum load of 8kg each spread evenly
throughout the drawer. Do not exceed this weight.
Incorrect installation could lead to injury, take care following instructions.
Due to the size of this product we recommend that it is assembled in the room intended for use
When you are ready to start, make sure that you have the right tools, plenty of space and a clean,
dry area for assembly
Unwrap all packaging materials and place the components on top of the carton box or on a clean
floor to prevent it from scratching
Check the pack and make sure you have all the parts listed
Ensure that this product is fully assembled and secured as illustrated before use
Check all screws or bolts are tightened and inspect regularly.
This product should only be used on firm, level ground.
Dismantle for transportation.
Only use recommended accessories.
Tools are included.
WARNINGS
DO make sure the legs remain in contact with the ground.
DO keep small parts out of reach of children.
DO NOT use power tools to construct this product.
DO NOT tighten screws until fully assembled.
DO NOT over tighten screws or bolts.
DO NOT use this product if parts are missing, damaged or worn. DO NOT stand on the product.
CARE INFORMATION
Never use scourers, abrasives or chemical cleaners
To clean wipe with a sponge and warm soapy water. Do not use solvent based cleaners or
detergents as they can bleach or damage the product
ASHBOURNE 2 DRAWER BEDSIDE
page 2 of 9
V1 03/19

parts
Please check the pack contents before assembling this product.if any componers are missing,
please contact your retailer.The fittings pack contains small items that should be kept away
from small children.
ASHBOURNE 2 DRAWER BEDSIDE
1
2
3
page 3 of 9
V1 03/19

Bolt-1/32*35mm 2
A
10 20 30 40 50 60 70 80 90 100
Fixings(to scale)
Ref Qty
Dimensions
12
Description:Ashbourne 2 drawer
bedside
Qty:1pc
Description:Feet
Qty:4pcs
CAUTION: There are many small components used in the construction of this product.Please
keep these components away from young children whilst assembling this product.
if you keep the fittings in a bowl during assembly you will be less likely to lose them!
ASHBOURNE 2 DRAWER BEDSIDE
Description:Wooden handle
Qty:2pcs
page 4 of 9
3
V1 03/19

Layout Parts on Soft Surface
Lay out all 2 sides on a soft surface i.e.Rug,Carpet or Packaing Carton
page 5 of 9
ASHBOURNE 2 DRAWER BEDSIDE
V1 03/19

STEP 1 Parts
Required
1.Ashbourne
2 drawer
bedside X 1
3.Wooden
handle X 2
ASHBOURNE 2 DRAWER BEDSIDE
First remove the wooden handle
3
1
page 6 of 9
V1 03/19

STEP 2 Parts
Required
1.Ashbourne
2 drawer
bedside x1
3.Wooden
handle X 2
A X 2
ASHBOURNE 2 DRAWER BEDSIDE
A
3
1
page 7 of 9
V1 03/19

STEP 3 Parts
Required
1.Ashbourne
2 drawer
bedside
2.Feet X 2
ASHBOURNE 2 DRAWER BEDSIDE
222
2
1
page 8 of 9
V1 03/19

Complete Assembly
Periodically check to ensure that the components are in their proper position,free from damage.
Also,make sure the connectors are tight and secure
Keep instructions for future reference
ASHBOURNE 2 DRAWER BEDSIDE
page 9 of 9
V1 03/19