Big Save Furniture NOBILITY-ST 4856 User manual

Read instruction carefully . See Furniture Parts list and Hardware List for guidance . Be sure you have all parts before you start assembling .
Place and assemble furniture on a clean flat soft surface , such as carpet or rug to pervent being scratched .
Before you begin, please follow assembly instructions carefully, then follow them step by step.
Reminder:
Please ensure that all surfaces and edges with colours/laminations are facing forward/outward.
1
2
PART LIST
TOP PANEL MINI FIX
4
SIDE PANEL (L)
6
SIDE PANEL (R)
7
8
QTY
3
5
HARDWARE
A
B
C
D
E
F
G
6 SETS
ALLEN KEY M4 1 PC
BOTTOM PANEL
DRAWER FRONT
BACK PANEL
H
I
J
M6 X 5OMM
CSK CAP WOOD SCREW
A1 A2 A3
M8 X 30MM WOOD DOWEL 12 PCS
9DRAWER BOTTOM
MODEL : NOBILITY-ST 4856ASSEMBLY INSTRUCTIONS PAGE: /4
1
1 SET
6 PCS
1 PC
1 PC
1 PC
1 PC
1 PC
1 PC
M4 X 38MM C.B SCREW 8 PCS
28 PCS
2 PCS
DRAWER SIDE
DRAWER BACK
2 PCS
SCREWDRIVER HAMMER
SELF-PREPARED TOOLS: Tools below are NOT included in package.
1 PC
1 PC
M3.5 X 16MM C.B SCREW
M3 X 12MM C.B SCREW
GOLD METAL LEG 90 x 90 x 8 x H400MM 4 PCS
HANDLE EM 0071-100 X 30 X 20 1 PC
1
2
3
4
5
6
7
8
9
8
H
I
J1 ( L/R )
J2 ( L/R )
14" DRAWER SLIDE

STEP 1 STEP 2
STEP 3 STEP 4
MODEL : NOBILITY-ST 4856ASSEMBLY INSTRUCTIONS PAGE: /4
2
1
34
5
3
4
1
3
4
5
1
2
3
4
5
- Insert hardware A1 onto panel (3), (4) and (5).
(Repeat 6 times.)
- Insert hardware A2 onto panel (1).
(Repeat 6 times.)
- Insert hardware B onto panel (3), (4) and (5).
(Repeat 12 times.)
SCREWDRIVER
REQUIRED
* Ensure the arrows on hardware A1 point towards mounting positions.
PRESS
A1
x6
A2
x6
ROTATE
x12
PRESS
B
Fix hardware J1 (L/R) into panel (3) and (4) with hardware F.
(Repeat 3 times for each hardware.)
SCREWDRIVER
REQUIRED
x2
ROTATE
x2
ROTATE
J1(L)
FF
First hole from the edge. Small hole at the center.
J1(R)
- Attach panel (1) to panel (3), (4) and (5).
- Insert all hardware A2 into A1.
- Rotate all A1 until tight.
- Apply A3 onto all A1.
(Repeat 6 times.)
OR
HARDWARE
D
SCREWDRIVER
REQUIRED
* In this step hardware A1, A2 and B are pre-inserted.
ROTATE
Section View
x6
A2
A1
x6 PRESS
A3
Connect panel (2) to panel (3), (4) and (5)
by using hardware C and D.
(Repeat 6 times.)
ROTATE
x6
C
D
* In this step hardware B are pre-inserted.
HARDWARE
D
x2
ROTATE
F
Third hole from the edge.

STEP 5 STEP 6
STEP 7 STEP 8
MODEL : NOBILITY-ST 4856ASSEMBLY INSTRUCTIONS PAGE: /4
3
1
2
3
46
H
6
8
6
8
Assemble hardware I onto panel (2)
by using hardware F.
(Repeat 4 times for each hardware.)
SCREWDRIVER
REQUIRED
ROTATE
x16
FI
Fix hardware H onto panel (6) by using hardware E.
(Repeat 2 times.)
SCREWDRIVER
REQUIRED
ROTATE
E
x2
Assemble panel (8) to panel (6) by using hardware G.
(Repeat 4 times.)
SCREWDRIVER
REQUIRED
ROTATE
G
x4
8
Insert the panel (9) along the slot.
(Repeat 1 times.)
8
9

STEP 9 STEP 11
STEP 10
MODEL : NOBILITY-ST 4856ASSEMBLY INSTRUCTIONS PAGE: /4
4
6
78
9
1
2
3
4
6
8
9
6
7
89
Assemble panel (8) to panel (7) by using hardware G.
(Repeat 4 times.)
SCREWDRIVER
REQUIRED
ROTATE
G
x4
8
Assemble hardware J2 (L/R) to panel (8) by using hardware F.
(Repeat 3 times for each hardware.)
Hole at the center.
Third hole from the edge. Third hole from the edge.
x2
F
x2
F
x2
F
ROTATE ROTATE ROTATE
*Hardware J2 (L/R) shall be leaning against panel (6) when assembling.
SCREWDRIVER
REQUIRED
J2(R)
J2(L)
8
Put all the drawer in place along the drawer slides.
8
H
I