Big Save Furniture SW 5532 User manual

WARNING!!
·Remove hardware from box and sort by size.
·Please check to see that hardware and parts are
present prior start of assembly.
·Please follow attached instruction in the same
sequence numbered to ensure fast and
easy assembly.
·Do not use this table if any part is broken, torn or
missing.
·The assembly of this product requires two
people.
·Do not use any power tools as this may damage
the frame and will invalidate any claim.
PART LIST
HARDWARE LIST
Attach the newspaper
rack (P3) and upper rail (P4)
to the table leg (P2).
Complete one side first
and repeat the same for the
other side of table leg (P2).
You will need to use
hardware:
1.
Place the table top (P1)
upside down on a
non-abrasive surface. Attach
the table top (P1) to the
upper rail (P4).
You will need to use
hardware :
ALLEN KEY M4
M4 X 25MM SCREW
2.
3.
P1
P2
P3
P4
TABLE TOP
TABLE LEG
NEWSPAPER RACK
UPPER RAIL
D
E
A = 8 pcs
B = 8 pcs
C = 8 pcs
D = 1 pcs
= 1pcs
= 2pcs
= 1pcs
= 2pcs
= 1pcs
AM6 X 50MM JCBC = 8pcs
= 8pcs
= 6pcs
SW 5532 - TABLE
SW8120Q/K
FULLY SET UP
BBARREL NUT = 8pcs
C
O8 X 30MM WOOD DOWEL = 8pcs
B
B
A
D
C
C
(This assembly method also apply to side table)
(CT)
(ST)
E
E = 8pcs (CT)
6pcs (ST)
*For side table only 3pcs
screw each side apply only*

WARNING!!
·Remove hardware from box and sort by size.
·Please check to see that hardware and parts are
present prior start of assembly.
·Please follow attached instruction in the same
sequence numbered to ensure fast and
easy assembly.
·Do not use this sofa if any part is broken,torn
or missing.
·The assembly of this product requires two
people.
·Do not use any power tools as this may damage
the frame and will invalidate any claim.
PART LIST
HARDWARE LIST
Attach the backrest (P1) and
front rail (P2) between the
handle (P3).
You will need to use
hardware:
1.
Put the seat (P4) down and
fix it with backrest (P1) and
front rail (P2).
You will need to use
hardware :
ALLEN KEY M4
M4 X 32MM SCREW(1S)
(2S)
(3S)
3.
4.
P1
P2
P3
P4
Backrest
Front Rail
Handle
Seat
F
D
A = 2 pcs
B = 2 pcs
C = 4 pcs
E = 4 pcs
F = 1 pcs
G = 1 pcs
D = 4pcs (1 seater)
8pcs (2 seater)
12pcs (3 seater)
= 1pcs
= 1pcs
= 2pcs
= 1pcs
= 1pcs
A
ALLEN KEY M5 = 1pcs
G
M6 X 70MM JCBC = 2pcs
= 4pcs
SW 5503 CHAIR
SW8120Q/K
A
F
E
G
C
D
D
FULLY SET UP
WOODEN PLUG
E
M6 X 50MM JCBC = 2pcs
B
M8 X 16MM JCBB = 4pcs
C
B
2. Attach the support leg (P5) to
the bottom of the seat (P4).
Fix the adjuster (H) to the
bottom of the support leg (P5).
You will need to use
hardware :
P5 Support Leg = 2pcs
ADJUSTER
H= 2pcs
H = 2 pcs
H
= 4pcs
* 3 Seater only
= 8pcs
= 12pcs
*THIS STEP ONLY APPLY TO
3 SEATER SOFA ONLY*
(This assembly method also apply to 1 seater and 2 seater)
* 3 Seater only