Accent Antique OC2500 User manual

Assembly Instructions
Accent Table- Antique White

Parts List
Please review all parts and hardware before disposing of any packaging.
Call Customer Service if missing hardware. Do not return to store/retailer.
Using a screw that is too long will cause damage. Before beginning assembly,
separate each type of screw. Carefully study the screw diagrams below.
You may receive extra hardware with your unit.
A 1pc
Top
B 4pcs
Leg
C 1pc
Shelf
1 8pcs
Bolt (Ø1/4 X 1-3/8”)
2 4pcs
Screw (Ø1/8 X 1-3/4”)
3 1pc
Bolt (Ø1/8 X 7/8”)
4 1pc
Handle
5 1pc
Allen Wrench
Care and Cleaning Instructions:
Before using, wipe with a clean, dry cloth.
Periodically apply furniture wax to renew the finish.
Avoid rubbing or scratching the surface with rough or
abrasive objects.
Assembly Tool Required
Phillips and Flat Head
Accent Table
For replacement parts or questions, please call
customer service.

Step 1:
Attach 3 Legs (B) to Top
(A) using Bolts (1) and
Allen Wrench (5).
Note: Do not fully tighten
Bolts until Step 4 is
complete.
Step 2:
Insert Shelf (C) between
the 3 Legs.
Accent Table
Assembly Instructions

Step 3:
Attach the 4
th
Leg (B) and
use Bolts (1) to secure to
the top.
Step 4:
Secure Shelf (C) to Legs
(B) using Screws (2) and
tighten using Phillips
screwdriver.
Note: Make sure the
predrilled holes on Shelf
(C) are facing towards
the legs, you may have
to turn the Shelf around
until the holes align.
Bolts can be fully
tightened at this time.
Turn the table right side
up.

Step 5:
Attach Handle (4) using
Bolt (3).
Assembly is complete.