BIG TIME TOYS The Original Roller Racer Flying Turtle User manual

A unique product of American
ingenuity—This timeless toy
delights another generation!
How’s It Go?
1. Sit on the middle of the seat.
2. Place feet on the handlebars.
3. Grip the handlebars.
4. Swing the handlebars from side to side
(don’t just turn them—swing!!)
Safety Instructions
The Roller Racer®is a safe toy for children
following these guidelines.
1. Do not use on or near inclines, roadways,
bodies of water or stairs.
2. Always ride seated with feet on the
handlebars.
3. Wear shoes and a helmet.
4. Allow only one rider at a time.
5. Weight limit is 150 lbs.
The Roller Racer® has a One Year Limited Warranty. This product is designed
for home-use only. Usage in institutional or commercial settings voids warranty.
Replacement parts are available.Contact Big Time Toys to order. As per our
discretion, we will replace the defective part or the entire unit. This warranty does
not cover damages resulting from misuse of product.
Big Time Toys, LLC.
2823 Dogwood Place, Nashville, TN 37204
Toll Free 800-419-3810
www.bigtimetoys.com
Interested in ordering in bulk? Send an e-mail to [email protected] to learn more about placing wholesale orders. ©2020 Big Time Toys, LLC, All Rights Reserved
We are happy that you are happy. If you
don’t know how to express your happiness,
we’ve got a few recommendations...
Our friendly supportive service will work
hard to put a smile back on your face.
Here’s how we can connect:
Share your happy
experience with
an online review.
Email us at:
[email protected]
Happy? Not Happy?

Easy Assembly
Instructions
Thank you for your recent purchase of the original Roller Racer®. Within just a few moments and in five easy steps, you will have
your Roller Racer®completely assembled and ready for hours of fun in the years to come.
Post Bolt
(part A)
Post Lock Nut
(part C)
Seat
(part D)
Stickers
(part F)
Post Bearing
(part B)
Handle Bars
(part E)
Tools Needed
2 – ¾” Fork Wrenches - Included
Step One
Remove the ¾" Post Lock Nut (part C) from the Post Bolt that
extends through the hole in the Roller Racer Seat (part D).
Step Two
Gently tap the Post Bearings (part B), both top and bottom,
so that they fit snugly in the front of the seat (part D).
Step Three
Slide the Roller Racer®handlebars (part E) over the Post Bolt
(part A) that has been inserted through the top of the Roller
Racer®seat (part D ) (See Diagram).
Step Four
Attach the Post Lock Nut (part C) to the Post Lock Bolt. Place
one ¾" fork/socket wrench on the Post Bolt (part A) and the
other ¾" fork/socket wrench on the Post Lock Nut (part C).
Tighten. NOTE: The seat should move freely, with only a slight
amount of tension when you hold the handlebars and swing the
seat from side to side.
Step Five
Carefully apply the 3 stickers to the rear of seat and to both
sides as the photograph on the box shows.
Your Roller Racer®is now
ready for hours of fun!
©2020 Big Time Toys, LLC, All Rights Reserved