Biketronics PowerGrill BT100 User manual
Page 1 of 2
Page 1 of 2
PowerGrill Installation BT100
Harley FLHT Fairing
1996 to Present
Kit Contents:
(2) Speaker Adapters
(2) Speaker Grills
(4) #10x2” Screws
WARNING!
Use new #10x2”
screws in these
two locations
Re-use short Harley
screw here
Notch on side of
adapter mates
with fairing
Do not place
screw in
lower-inside
hole
PowerGrill Installation BT100
Harley FLHT Fairing
1996 to Present
Kit Contents:
(2) Speaker Adapters
(2) Speaker Grills
(4) #10x2” Screws
WARNING!
Use new #10x2”
screws in these
two locations
Re-use short Harley
screw here
Notch on side of
adapter mates
with fairing
Do not place
screw in
lower-inside
hole
Page 2 of 2
Page 2 of 2
Adapters should be
positioned so wide part
is facing top of fairing.
Biketronics recommends
positioning your speaker
so terminals are in the
12 o’clock position
If you require assitance with your
installation please contact us:
Toll Free: 800-735-2419
International: 208-875-2645
E-Mail: [email protected]
Web: biketronics.com
BIKETRONICS
Made in USA
Adapters should be
positioned so wide part
is facing top of fairing.
Biketronics recommends
positioning your speaker
so terminals are in the
12 o’clock position
If you require assitance with your
installation please contact us:
Toll Free: 800-735-2419
International: 208-875-2645
E-Mail: [email protected]
Web: biketronics.com
BIKETRONICS
Made in USA
