DNA PROTECTED DL305-B User manual

DL305-B Smart Bluetooth Bicycle Lock
User Guide
Accessories List
Hose clamp X2 Buckle X2 Screws X2 USB charger

Light
USB
charge
Unlock
button
Product parameters
Material：PA66+GF30%+Aluminum alloy
Net weight：450g
Waterproof Level：IP66 Dimension：
159 X 136 X 36mm
Indicator
Hole spacing：78mm
Standard OBL36A
Size of hose clamp：20-40mm
Solar panel：6V 20mA
USB charge：500mA 5V
Battery：700mAh 3.7V
Charging red light on. full charging red off.
Charging time：3 hours
Solar panel OBL36B Standby：60days（excluding solar charging）
Product Features
1.Two options to Unlock setting in APP Homepage: ①by APP ②Manual control
2. Abnormal movement when bike is locked, lock alarm works.
3.Support to charge by solar panel. (Solar version only)
Installation Introduction

Operation Procedure
1. Download APP/Register/Login
IOS Android
2. Turn on
Turn on the lock by charging . when plug in USB charger ,Red light on
and Sounds "Bibi" means turn on successfully.
3. Add device
3.1、Click in the lower right corner to jump to the scan QR code interface, scan
the QR code or barcode on the device, and automatically connect to the device after
the scan is successful.

3.2 、When the mobile phone cannot scan the QR code of the device, click in the
upper right corner to jump to the search nearby device interface, find the device named
OBL36, and click Connect.
3.3 、After the connection is successful, the lock will have a beep of di, and then enter any
device name, click OK to bind successfully, and automatically connect after binding,
means connected, means not connected

4. Unlock mode selection
Click on the device in the list through the APP
to enter the device details to set the unlock
method, you can choose Bluetooth unlock or
Bluetooth + button to unlock
Bluetooth unlock: only use APP to unlock
Bluetooth + button unlock: APP unlock and
button unlock can be used
4.Lock
Push the lock to the end manually
to close the lock.
6.Equipment management
6.1 Disconnection: After disconnecting, should reconnect lock before use it.
6.2 Power off: Three beeps when off means successful shutdown.
Precautions:
1. In order to ensure the normal use of the equipment,
it is recommended that the battery power is not less
than 15%.
2. Please do not disassemble the equipment by y
ourself, man-made damage will not be covered by
the warranty.
3. Support Bluetooth 4.0 or higher for Android phones