Biostar M7NCG400 User manual

M
M
M7
7
7N
N
NC
C
CG
G
G 4
4
40
0
00
0
0
i
FCC Statement and Copyright
This equipment has been tested and found to comply with the limits of a
Class B digital device, pursuant to Part 15 of the FCC Rules. These limits
are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses
and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. There is no guarantee that interference will not occur in
a particular installation.
The vendor makes no representations or warranties with respect to the
contents here of and specially disclaims any implied warranties of
merchantability or fitness for any purpose. Since our products are under
continual improvement, we reserve the right to make changes without
notice.
The material in this manual is the intellectual property of the vendor.
Further the vendor reserves the right to revise this publication and to
make changes to its contents without obligation to notify any party
beforehand. Duplication of this publication, in part or in whole, is not
allowed without first obtaining the vendor’s approval in writing. Even
thought we have taken every care in the preparation of this user’s manual,
no guarantee is given as to the correctness of its contents.
All the brand and product names are the property of their respective
owners.

C
C
Co
o
on
n
nt
t
te
e
en
n
nt
t
ts
s
s
ii
ENGLISH.................................................................................................1
M7NCG 400 Features ........................................................................................................... 1
Package contents................................................................................................................. 2
Layout of M7NCG 400.......................................................................................................... 3
CPU Installation.................................................................................................................... 4
CPU/ System Fan Headers: JCFAN1/ JSFAN1/ JNFAN1 ................................................. 4
DDR DIMM Modules: DIMMB1/DIMMB2/ DIMMA1............................................................ 5
How to install a DIMM Module ............................................................................................ 5
Jumpers, Headers, Connectors & Slots............................................................................ 6
ESPAÑOL..............................................................................................13
Características del M7NCG 400........................................................................................ 13
Contenido del Paquete ...................................................................................................... 14
Disposición del M7NCG 400 ............................................................................................. 15
Instalación de la CPU......................................................................................................... 16
Instalación de la CPU......................................................................................................... 16
Módulos DDR DIMM: DIMMB1/DIMMB2/ DIMMA1.......................................................... 17
Conectores, Cabezales, Puentes y Ranuras .................................................................. 18
DEUTSCH..............................................................................................25
M7NCG 400 Features ......................................................................................................... 25
Verpackungsinhalt..............................................................................................................26
Layout des M7NCG 400 ..................................................................................................... 27
Installation der CPU ........................................................................................................... 28
DDR-DIMM-Modules: DIMMB1/DIMMB2/ DIMMA1.......................................................... 29
Jumper, Header, Anschlüsse & Slots .............................................................................. 30
FRANÇAIS.............................................................................................37
M7NCG 400 Particularités ................................................................................................. 37
Dessin d’M7NCG 400 ......................................................................................................... 39
9TH TOUCHTM IS NICE TOUCH.............................................................40
BIOS STAR -[ FLASHER™ ]..................................................................41
WATCHDOG TECHNOLOGY.................................................................45
TROUBLE SHOOTING ..........................................................................46
SOLUCIÓN DE PROBLEMAS ...............................................................47
PROBLEMLÖSUNG ..............................................................................48

M
M
Mo
o
ot
t
th
h
he
e
er
r
rb
b
bo
o
oa
a
ar
r
rd
d
d
D D
De
e
es
s
sc
c
cr
r
ri
iip p
pt
t
ti
iio o
on
n
n
1
English
M7NCG 400 Features
CPU
- Supports the AMD® Socket462 processor up to XP 3200+.
- Running at 200/266/333/400MHz Front Side Bus.
Chipset
- North Bridge: nFORCE2 Crush 18G IGP Chipset.
- South Bridge: MCP Chipset.
High Speed 800Mb/s Hyper-Transport interface to the MCP.
Main Memory
- Supports up to 3 DDR devices.
- Supports 200/266/333 MHz (without ECC) DDR devices.
- High performance 128-bit DDR333 Twin Bank Memory Architecture.
- The largest memory capacity is 3GB.
Slots
- Three 32-bit PCI bus master slots.
- One CNR slot.
- One AGP slot: AGP3.0 8X interface at 533Mb/s.
Supports AGP 4X, 8X.
On Board IDE
- Supports four IDE disk drives.
- Supports PIO Mode 4, Master Mode and Ultra DMA 33/66/100/133 Bus
Master Mode.
On Board VGA
- GeForce 4MX Series graphics processing unit(GPU).
1394 Chip (optional)
- Realtek 8801BL.
- Support 2 ports with transfer rate up to 400Mbps.
Audio
- AC97 2.2 interface.
- PC99 complaint.
- Supports 6 channels.
- S/PDIF Out.
TV Out (optional)
- Support s-video output mode
- Display resolution up to 1024 x 768 (including all DOS modes)

M
M
Mo
o
ot
t
th
h
he
e
er
r
rb
b
bo
o
oa
a
ar
r
rd
d
d
D D
De
e
es
s
sc
c
cr
r
ri
iip p
pt
t
ti
iio o
on
n
n
2
- Support TV formats: NTSC-M (North America and Taiwan)
NTSC-J (Japan)
PAL (Europe and Asia)
On Board Peripherals
- Supports 360K, 720K, 1.2MB, 1.44MB and 2.88MB floppy disk drivers.
- Supports 2 serial ports.
- Supports 1 multi-mode parallel port. (SPP/EPP/ECP mode)
- Supports PS/2 mouse and PS/2 keyboard.
- Supports 2 back USB2.0 ports and 4 front USB2.0 ports.
- Supports S/PDIF Out connector.
BIOS
- AWARD legal Bios.
- Supports APM1.2.
- Supports ACPI.
- Supports USB Function.
Operating System
- Offers the highest performance for MS-DOS, Windows 2000, Windows Me,
Windows XP, SCO UNIX etc.
Dimensions
- MicroATXFormFactor:24.4cmX24.4cm(WXL)
Package contents
- HDD Cable X 1
- FDD Cable X 1
- Fully Setup Driver CD X 1
- User Manual X 1
- USB Cable X 2 (optional)
- SPDIF OUT Cable X1 (optional)
- IEEE 1394 Cable X1 (optional)

M
M
Mo
o
ot
t
th
h
he
e
er
r
rb
b
bo
o
oa
a
ar
r
rd
d
d
D D
De
e
es
s
sc
c
cr
r
ri
iip p
pt
t
ti
iio o
on
n
n
3
Layout of M7NCG 400
JCOM1
JKBMS1
JUSBLAN1
1
JKBV1
JPRNT1
IGP
IGPIGP
IGP
JSPKR1
SP-OUT
JGAME1
JMIC1
MIC-IN
JLIN1
LINE-IN
GAME Port
1JNFAN1
PCI3
PCI2
PCI1
1
1
2
9
10
Codec
CodecCodec
Codec
JUSB1
2
9
10
1
JUSB2
2
9
10
1
J1394A J1394B
2
9
10
1
2
9
10
1JPANEL1
1
2
JCMOS
23
24
1
1
JSFAN1
JWOL1
1
MCP
MCPMCP
MCP
BIOS
BIOSBIOS
BIOS
DIMMB2
DIMMB1
DIMMA1
FDD1
FLOPPY DISK CONN.
PRIMARY IDE CONN.
IDE1IDE2
SECONDARY IDE CONN.
JATXPWER1
BAT1
1
JCFAN1
JVGA1
Winbond
WinbondWinbond
Winbond
I/O
I/OI/O
I/O
JC1
1
1
JUSBV2
1
JCLK3
1J_CODECSEL
1
JUSBV1
1394A
1394A1394A
1394A
Chip
ChipChip
Chip
(optional)
(
o
p
tional
)(
o
p
tional
)
(optional)
Lan
LanLan
Lan
Chip
ChipChip
Chip
1
J_SPDIF1
JDJ1
1
5
1
24
3
JTV1
JUSBV4
1

M
M
Mo
o
ot
t
th
h
he
e
er
r
rb
b
bo
o
oa
a
ar
r
rd
d
d
D D
De
e
es
s
sc
c
cr
r
ri
iip p
pt
t
ti
iio o
on
n
n
4
CPU Installation
1. Pull the lever sideways away from the socket then raise the lever up to
90-degree angle.
2. Locate Pin A in the socket and lock for the white dot or cut edge in the CPU.
Match Pin A with the white dot/cut edge then insert the CPU.
3. Press the lever down. Then Put the fan on the CPU and buckle it and put the
fan’s power port into the JCFAN1, then to complete the installation.
CPU/ System Fan Headers: JCFAN1/ JSFAN1/ JNFAN1
CPU
JNFAN1
Ground
12V
1
JCFAN1
1Ground
12V
Sense

M
M
Mo
o
ot
t
th
h
he
e
er
r
rb
b
bo
o
oa
a
ar
r
rd
d
d
D D
De
e
es
s
sc
c
cr
r
ri
iip p
pt
t
ti
iio o
on
n
n
5
DDR DIMM Modules: DIMMB1/DIMMB2/ DIMMA1
For Dual-channel DDR (128-bit) high performance, at least 2 or
more DIMM modules must be installed. (It has to be the
combination of DIMMA and DIMMB.) With only one DIMM installed,
the memory performs only at 64-bit.
DRAM Access Time: 2.5V Unbuffered DDR 200/266/333 MHz Type required.
DRAM Type: 64MB/ 128MB/ 256MB/ 512MB/ 1GB DIMM Module (184 pin)
DIMM Socket
Location DDR Module Total Memory Size (MB)
DIMMB1 64MB/128MB/256MB/512MB/1GB
*1
DIMMB2 64MB/128MB/256MB/512MB/1GB
*1
DIMMA1 64MB/128MB/256MB/512MB/1GB
*1
Max is
3GB
~~~only for reference~~~
How to install a DIMM Module
1. The DIMM socket has a “ Plastic
Safety Tab”, and the DIMM memory
module has an “Asymmetrical notch”, so
the DIMM memory module can only fit
into the slot in one direction.
2. Push the tabs out. Insert the DIMM
memory modules into the socket at a
90-degree angle, then push down
vertically so that it will fit into the place.
3. The Mounting Holes and plastic tabs
should fit over the edge and hold the
DIMM memory modules in place.

M
M
Mo
o
ot
t
th
h
he
e
er
r
rb
b
bo
o
oa
a
ar
r
rd
d
d
D D
De
e
es
s
sc
c
cr
r
ri
iip p
pt
t
ti
iio o
on
n
n
6
Jumpers, Headers, Connectors & Slots
Hard Disk Connectors: IDE1/ IDE2
The motherboard has a 32-bit Enhanced PCI IDE Controller that provides PIO
Mode 0~4, Bus Master, and Ultra DMA / 33/ 66/ 100/ 133 functionality. It has two
HDD connectors IDE1 (primary) and IDE2 (secondary).
The IDE connectors can connect a master and a slave drive, so you can connect
up to four hard disk drives. The first hard drive should always be connected to
IDE1.
Floppy Disk Connector: FDD1
The motherboard provides a standard floppy disk connector that supports 360K,
720K, 1.2M, 1.44M and 2.88M floppy disk types. This connector supports the
provided floppy drive ribbon cables.
Communication Network Riser Slot: CNR1
The CNR specification is an open Industry Standard Architecture, and it defines a
hardware scalable riser card interface, which supports audio, network and modem
only.
Peripheral Component Interconnect Slots: PCI 1-3
This motherboard is equipped with 3 standard PCI slots. PCI stands for Peripheral
Component Interconnect, and it is a bus standard for expansion cards, which has,
supplanted the older ISA bus standard in most ports. This PCI slot is designated
as 32 bits.
AGP (Accelerated Graphics Port) Slot: AGP1
Your monitor will attach directly to that video card. This motherboard supports
video cards for PCI slots, but it is also equipped with an Accelerated Graphics Port
(AGP). An AGP card will take advantage of AGP technology for improved video
efficiency and performance, especially with 3D graphics.
Power Connectors: JATXPWER1
JATXPWR1
(ATX Main Power Conn.)
JATXPWR1
(ATX Power Conn.)

M
M
Mo
o
ot
t
th
h
he
e
er
r
rb
b
bo
o
oa
a
ar
r
rd
d
d
D D
De
e
es
s
sc
c
cr
r
ri
iip p
pt
t
ti
iio o
on
n
n
7
Wake On LAN Header:
JWOL1
Front USB Header: JUSB1/ JUSB2
5V/ 5V_SB Selection for Keyboard and Mouse: JKBV1
Note: 5V Standby only use for S3 Mode.
Front 1394 Header: J1394A/ J1394B (optional)
JUSB1/2
2
1
Pin Assignment Pin Assignment
12
43
56
87
910
+5V +5V
Data (-)Data (-)
Data (+) Data (+)
Ground Ground
Key NA
J1394A/ B
2
1Pin Assignment Pin Assignment
1
3
5
7
9
2
4
6
8
10
A+ A-
GroundGround
B+ B-
+12V +12V
GNDKEY
JWOL1
15V_SB
Wake up
Ground
JKBV1
5V Standby
Pin 1-2 on 5V
Assignment
1
Pin 2-3 on
1

M
M
Mo
o
ot
t
th
h
he
e
er
r
rb
b
bo
o
oa
a
ar
r
rd
d
d
D D
De
e
es
s
sc
c
cr
r
ri
iip p
pt
t
ti
iio o
on
n
n
8
5V/ 5V_SB Selection for USB: JUSBV1/JUSBV2/
(JUSBV4=>optional)
Note: 5V Standby only use for S3 Mode.
Front Panel Connector:
JPANEL1
Audio Subsystem: JF_AUDIO1/ JCDIN1
SPK
PWR_LED
HLED
SLP
RST
224
IR
123
IRON/OFF
SPK ==> Speaker Conn.
HLED ==> Hard Driver LED
RST ==> Reset Button
IR ==> Infrared Conn.
SLP ==> Sleep Button
PWR_LED ==> Power LED
ON/ OFF ==> Power-on Button
(+) (-)
(+) (-)(+)
1
2
JAUDIO1
(Front AudioHeader)
1
JCDIN1
(CD-ROM Audio-In Header)
1
2
JF_AUDIO1
(Front AudioHeader)
1
JCDIN1
(CD-ROM Audio-In Header)
JUSBV1/ 2/ 4
5V Standby
Pin 1-2 on
5V
Assignment
Pin 2-3 on
1
1

M
M
Mo
o
ot
t
th
h
he
e
er
r
rb
b
bo
o
oa
a
ar
r
rd
d
d
D D
De
e
es
s
sc
c
cr
r
ri
iip p
pt
t
ti
iio o
on
n
n
9
JF_AUDIO1 only support 2CH.
Clear CMOS Jumper: JCMOS
12
Front Panel Audio Connector/Jumper Block
910 Audio line out signals are routed
to the back panel audio line out connector.
Pin 5 and 6
Pin 9 and 10
Audio line out and mic in signals are
available for front panel audio connectors.
3
5
7
4
6
12
910
3
5
7
4
6No jumpers
installed
Jumper Setting Configuration
2
JF_AUDIO1
1
210
9
Pin
1
3
5
7
9
Pin
2
4
6
8
10
Mic In
Mic Power
RT Line Out
Reserved
LFT Line Out
Assignment Ground
Audio Power
RT Line Out
Key
Assignment
LFT Line Out
JCMOS
Clear CMOS
Data
Pin 1-2 on Normal
Operation
(default)
Assignment
1
Pin 2-3 on
1

M
M
Mo
o
ot
t
th
h
he
e
er
r
rb
b
bo
o
oa
a
ar
r
rd
d
d
D D
De
e
es
s
sc
c
cr
r
ri
iip p
pt
t
ti
iio o
on
n
n
10
Frequency Selection: JCLK3
Note: When overclock function failed and system is unable to boot-up, please
follow the instruction below:
1. Turn off the system.
2. Closed the JCLK3 jumper.
3. Turn on the system.
4. Enter CMOS setup menu and load defaults settings.
5. Turn off the system.
6. Open the JCLK3 jumper.
7. Turn on the system.
Case Open Connector: JC1
JC1
Ground
1
CaseOpen
Signal
JCMOS1
Pin2-3 close
Remove AC
power line wait 15
seconds JCMOS Pin1-2 close
Resetthe passwort asyour will
or clear CMOS data
AC power
on
1
JCLK3
Open==> User mode
(Default)
Close==> Safe mode or
CPU Clock 100MHz
1
JCLK3
Open==> User mode (Default)
(
133/ 166/ 200 MHz
)
Close==> Safe mode (100MHz)

M
M
Mo
o
ot
t
th
h
he
e
er
r
rb
b
bo
o
oa
a
ar
r
rd
d
d
D D
De
e
es
s
sc
c
cr
r
ri
iip p
pt
t
ti
iio o
on
n
n
11
CNR Codec Primary/Secondary Selection: J_CODECSEL
Digital Audio Connector: J_SPDIF1
Audio DJ Header: JDJ1 (optional)
TV Out Header: JTV1 (optional)
Pin 1-2 On-board Primary
Codec.
1Pin 2-3 CNR Primary Codec.
Assignment
J_CODECSEL
1
J_SPDIF1
1
GNDVCC5
SPDIF_OUT
1
5
Pin1 ==> SMBDT
Pin2 ==> SMBCK
Pin3 ==> -INTR_B
Pin4 ==> Key
Pin5 ==> PWRGD
JDJ1
1
24
3
Pin1 ==> TV_Y
Pin2 ==> Ground
Pin3 ==> Ground
Pin4 ==> TV_C
JTV1

M
M
Mo
o
ot
t
th
h
he
e
er
r
rb
b
bo
o
oa
a
ar
r
rd
d
d
D D
De
e
es
s
sc
c
cr
r
ri
iip p
pt
t
ti
iio o
on
n
n
12
Back Panel Connectors
The LED indicator for Lan port status:
Status
Speed Normal Download
10Mbps Right light: green
Left light: no Light: blink
100Mbps Right light: green
Left light: orange Light: blink
PS/2
Keyboard
PS/2
Mouse
COM1
Parallel Game Port
JPRNT1 JGAME1
JCOM1
JKBMS1
USB
LAN(Optional)
JUSBLAN1
Speaker
Out
Line In
Mic
In
COM2
(optional)
JCOM2
(optional)
PS/2
Keyboard
PS/2
Mouse
COM1
Parallel Game Port
JPRNT1 JGAME1
JCOM1
JKBMS1
USB
LAN(Optional)
JUSBLAN1
Speaker
Out
Line In
Mic
In
JVGA1
VGA1

M
M
Mo
o
ot
t
th
h
he
e
er
r
rb
b
bo
o
oa
a
ar
r
rd
d
d
D D
De
e
es
s
sc
c
cr
r
ri
iip p
pt
t
ti
iio o
on
n
n
13
Español
Características del M7NCG 400
CPU
- Soporta procesador AMD® Zócalo 462 de hasta XP 3200+.
- Corriendo a 200/266/333/400MHz FSB.
Chipset
- North Bridge: nFORCE2 Crush18G IGP Chipset.
- South Bridge: MCP Chipset.
High Speed 800Mb/s Hyper-Transport interface para el
MCP.
Memoria Principal
- Soporta hasta 3 dispositivos DDR.
- Soporto 200/266/333MHz (sin ECC) dispositivos DDR.
- High performance 128-bit DDR333 Twin Bank Memory Architecture.
- Capacidad máxima de memoria es 3GB.
Ranuras
- Tres ranuras de 32-bit PCI bus master.
- Una ranura CNR.
- Una ranura AGP: AGP3.0 8X interface a 533Mb/s.
Soporta AGP 4X, 8X.
On Board IDE
- Soporta cuatro discos IDE.
- Soporta Modo 4 PIO, Modo Master y Ultra DMA 33/66/100/133 Bus Modo
Master.
On Board VGA
- GeForce 4MX Series Unidad Gráficos de Proceso (GPU).
Chip 1394 (opcional)
- Realtek 8801BL.
- Soporta 2 puertos con transferencia de hasta 400Mbps.
Audio
- Interface AC97 2.2.
- PC99 complaint.
- Soports 6 canales.
- S/PDIF Out.
TV Out (opcional)
- Soporta modo s-video output.

M
M
Mo
o
ot
t
th
h
he
e
er
r
rb
b
bo
o
oa
a
ar
r
rd
d
d
D D
De
e
es
s
sc
c
cr
r
ri
iip p
pt
t
ti
iio o
on
n
n
14
- Resolución de pantalla de hasta 1024 x 768 (incluyendo todos los modos
DOS)
- Soporta formatos de TV: NTSC-M (América del Norte y Taiwan)
NTSC-J(Japón)
PAL (Europa y Asia)
Periféricos On Board
- Soporta 360K, 720K, 1.2MB, 1.44MB y 2.88MB unidad de disquete
- Soporta 2 puertos serie.
- Soporta 1 multi-modo del puerto paralelo (modos SPP/EPP/ECP)
- Soporta ratón PS/2 y teclado PS/2.
- Soporta 2 puertos USB2.0 traseros y 4 puertos USB2.0 delanteros.
- Soporta conector S/PDIF Out.
BIOS
- AWARD legal Bios.
- Soporta APM1.2.
- Soporta ACPI.
- Soporta función USB.
Sistemas Operativos
- Ofrece alto rendimiento en MS-DOS, Windows 2000, Windows Me,
Windows XP, SCO UNIX etc.
Dimensión
- Factor de Forma Micro ATX: 24.4cm X 24.4cm (W X L)
Contenido del Paquete
- Cable HDD X 1
- Cable FDD X 1
- Configuración Completa del Driver CD X 1
- Manual del Usuario X 1
- Cable USB X 2 (opcional)
- Cable SPDIF OUT X1 (opcional)
- Cable IEEE 1394 X1 (opcional)

M
M
Mo
o
ot
t
th
h
he
e
er
r
rb
b
bo
o
oa
a
ar
r
rd
d
d
D D
De
e
es
s
sc
c
cr
r
ri
iip p
pt
t
ti
iio o
on
n
n
15
Disposición del M7NCG 400
JCOM1
JKBMS1
JUSBLAN1
1
JKBV1
JPRNT1
IGP
IGPIGP
IGP
JSPKR1
SP-OUT
JGAME1
JMIC1
MIC-IN
JLIN1
LINE-IN
GAME Port
1JNFAN1
PCI3
PCI2
PCI1
1
1
2
9
10
Codec
CodecCodec
Codec
JUSB1
2
9
10
1
JUSB2
2
9
10
1
J1394A J1394B
2
9
10
1
2
9
10
1JPANEL1
1
2
JCMOS
23
24
1
1
JSFAN1
JWOL1
1
MCP
MCPMCP
MCP
BIOS
BIOSBIOS
BIOS
DIMMB2
DIMMB1
DIMMA1
FDD1
FLOPPY DISK CONN.
PRIMARY IDE CONN.
IDE1IDE2
SECONDARY IDE CONN.
JATXPWER1
BAT1
1
JCFAN1
JVGA1
Winbond
WinbondWinbond
Winbond
I/O
I/OI/O
I/O
JC1
1
1
JUSBV2
1
JCLK3
1J_CODECSEL
1
JUSBV1
1394A
1394A1394A
1394A
Chip
ChipChip
Chip
(optional)
(
o
p
tional
)(
o
p
tional
)
(optional)
Lan
LanLan
Lan
Chip
ChipChip
Chip
1
J_SPDIF1
JDJ1
1
5
1
24
3
JTV1
JUSBV4
1

M
M
Mo
o
ot
t
th
h
he
e
er
r
rb
b
bo
o
oa
a
ar
r
rd
d
d
D D
De
e
es
s
sc
c
cr
r
ri
iip p
pt
t
ti
iio o
on
n
n
16
Instalación de la CPU
1. Tire de la palanca del lado del zócalo, luego levante la palanca hasta un
ángulo de 90 grados.
2. Sitúe el contacto A del zócalo y busque el punto blanco o corte el borde en la
CPU. Empareje el contacto A con el punto blanco/ corte del borde, luego
inserte la CPU.
3. Presione la palanca para abajo. Ponga el ventilador en la CPU y abróchelo.
Luego ponga el puerto de corriente del ventilador en el JCFAN1. Y ya habrá
completado su instalación.
CPU/ Cabezal del Sistema de Ventilación: JCFAN1/ JSFAN1/
JNFAN1
CPU
JNFAN1
Tierra
12V
1
JCFAN1
1Tierra
12V
Sense

M
M
Mo
o
ot
t
th
h
he
e
er
r
rb
b
bo
o
oa
a
ar
r
rd
d
d
D D
De
e
es
s
sc
c
cr
r
ri
iip p
pt
t
ti
iio o
on
n
n
17
Módulos DDR DIMM: DIMMB1/DIMMB2/
DIMMA1
Para un alto funcionamiento, Dual-channel DDR (128-bit), por
lo menos 2 o más módulos DIMM debe ser instalado. (Tiene
que ser la combinación del DIMMA y DIMMB.) Con solamente
un DIMM instalado, la memoria funciona solamente a 64-bit.
DRAM Tiempo de Acceso: 2.5V Unbuffered DDR 200/266/333 MHz Tipo
requerido.
DRAM Tipo: 64MB/ 128MB/ 256MB/ 512MB/ 1GB Módulos DIMM (184 contactos)
Localización
del Zócalo
DIMM
Módulo DDR Total del
Tamaño de
Memoria (MB)
DIMMB1 64MB/128MB/256MB/512MB/1GB
*1
DIMMB2 64MB/128MB/256MB/512MB/1GB
*1
Máximo 3GB
~~~solamente para referencia~~~
Cómo instalar un módulo DIMM
1. El zócalo DIMM tiene una lengüeta
plástica de seguridad y el módulo de
memoria DIMM tiene una muesca
asimétrica, así el módulo de memoria
DIMM puede caber solamente en la
ranura de una sóla dirección.
2. Tire la lengüeta hacia afuera. Inserte
los módulos de memoria DIMM en el
zócalo a los 90 grados, luego empuje
hacia abajo verticalmente de modo que
encaje en el lugar.
3. Los agujeros de montaje y las
lengüetas plásticas deben caber por
sobre el borde y sostenga los módulos
de memoria DIMM en el lugar.

M
M
Mo
o
ot
t
th
h
he
e
er
r
rb
b
bo
o
oa
a
ar
r
rd
d
d
D D
De
e
es
s
sc
c
cr
r
ri
iip p
pt
t
ti
iio o
on
n
n
18
Conectores, Cabezales, Puentes y Ranuras
Conectores del Disco Duro: IDE1/ IDE2
La placa madre tiene un controlador de 32-bit PCI IDE que proporciona Modo PIO
0~4, Bus Master, y funcionalida Ultra DMA / 33/ 66/ 100. Tiene dos conectores
HDD IDE1 (primario) y IDE2 (secundario).
El conector IDE puede conectar a un master y un drive esclavo, así puede
conectar hasta cuatro discos rígidos. El primer disco duro debe estar siempre
conectado al IDE1.
Conector para el Disquete: FDD1
La placa madre proporciona un conector estándar del disquete (FDC) que soporta
360K, 720K, 1.2M, 1.44M y 2.88M tipos de disquete. Éste conector utiliza los
cables de cinta proporcionados por el disquete.
Ranura de Banda de Suspensión de Comunicación y Red: CNR1
La especificación CNR es una abierta Industria Estándar de Arquitectura, y define
una tarjeta hardware escalable de interface en el que soporta audio, red y
módem.
Ranura de Interconexión del Componente Periférico: PCI 1-3
Ésta placa madre está equipado con 3 ranuras PCI. PCI es la sigla para
Interconexión del Componente Periférico, y es un estándar bus para la tarjeta de
expansión en el que reemplaza, en su mayoría de las partes, al antiguo estándar
ISA bus. Las ranuras de PCI están desiñados con 32 bits.
Ranura del Puerto Acelerado para Gráficos: AGP1
Su monitor se fijará directamente a la tarjeta de video. Ésta placa madre soporta
tarjetas de video para ranuras PCI, y también está equipado con un Puerto
Acelerado para Gráficos (AGP/ solamente soporta 1.5V y 4X tarjeta AGP). Ésta
tarjeta AGP tomará ventaja de la tecnología del AGP para el mejoramiento de la
eficiencia y funcionamiento del video, especialmente con gráficos 3D.
Conector de Corriente: JATXPWER1
JATXPWR1
(Conector de
Corriente ATX)