Bissell EASY SWEEP COMPACT 2484 Series Quick setup guide

EASY SWEEP COMPACT
Manual Sweeper
2484 SERIES
Fit the threaded handle sections together and screw
tightly until secure. Screw the handle grip on the
threaded end of the handle.
To empty the dirt bins, hold the sweeper over
a trash bin or bag and press the bottom of each dirt
bin at the points indicated by the “PUSH” arrows.
Emptying
Maintaining
For best performance keep brushes and bearings clean of
hair, threads and other debris. The brush roll on this
sweeper removes to allow for easier brush cleaning
1
Front of Sweeper
1. Locate the front of the sweeper. Position the sweeper so that the front is top, and
the grey end of the brush roll is on the right side.
2. Locate the small tabs on both dirt bins and lift the tabs slightly and push outward
so that they rest on the outside edge of the bumper. This will ensure that the dirt bins
stay in place while removing the brush roll.
Front of Sweeper
Grey end
(right side)
To use, simply push the sweeper. For best results,
ensure that the front of the sweeper is facing forward
while using.
Front of Sweeper
Tab

©2018 BISSELL Homecare, Inc
Grand Rapids, Michigan
All rights reserved. Printed in China
Part Number 161-5709 06/18 Rev B
Visit our website at: www.BISSELL.com
If your BISSELL product should require service:
Contact BISSELL Consumer Care to locate a BISSELL Authorized Service Center in your
area. If you need information about repairs or replacement parts, or if you have questions
about your warranty, contact BISSELL Consumer Care.
Website:
www.BISSELL.com
E-mail:
www.BISSELL.com/email-us
Call:
BISSELL Consumer Care
1-800-237-7691
Monday – Friday 8am - 10pm ET
Saturday 9am - 8pm ET
Sunday 10am - 7pm ET
Please do not return this product to the store.
Other maintenance or service not included in the manual should be
performed by an authorized service representative.
For any questions or concerns, BISSELL is happy to be of service.
Contact us directly at 1-800-237-7691.
2
3. Grip the left side of the brush roll and push the right end (grey end) inward while
lifting the left side up and out.
4.To replace the brush roll, match the right end of the brush roll (grey end) with the
right side of the sweeper (ensure that the front of sweeper is top). Gripping the left
side of the brush, fit the right end of the brush into place then fit the left end into place
while pushing the right end inward until the brush is securely in place.
Front of Sweeper
Front of Sweeper
Grey end
(right side)
5. Lift both dirt bins open slightly to release the tabs. The sweeper will not function
properly if the tabs are not released before use.