Bissell CLEANVIEW User manual

H
O
M
E
C
L
E
A
N
I
N
G
E
X
P
E
R
T
S
E
S
T
.
1
8
7
6
U
.
S
.
A
.
CLEANVIEW® CONNECT
ROBOTIC VACUUM
MODEL 2908N
Product View....................2
Setup .........................3-4
Operations ....................4-5
Maintenance & Care ...........5-8
Troubleshooting .................8
2

2BISSELL.eu
What’s in the Box?
Additional
Pleated and
Foam Filters
Additional
Edge Cleaning
Brushes
B I S S E L L®
CleanView®
Connect
Docking
Station
Power
Adapter
(charger)
Cleaning
Tool
Product View
WARNING
Do not plug in your robot until you are familiar with all instructions and operating procedures.
3
3
12
1. Power Switch
2. Start/Pause Button
3. Contact Points
(for automatic charging)
4. Cliff Sensors
5. Bumper
6. Edge Cleaning Brushes
7. Front Wheel
8. Rear Wheels
9. Dirt Bin Release Button
10. Dirt Bin (filters inside)
11. Brush Roll
12. DC Port
13. Removable Battery
14. LED Light Ring
2
56
6
1
9
14
7
3 3
4
4
4
8 8
10
11
13

3
BISSELL.eu
3
21
Setting Up Your Robot
Place the back of Docking Station
firmly against a wall. Ensure there is at
least 1 meter to one side, 1 meter to the
opposing side and no obstructions in
front of the Docking Station.
Insert the Docking Station Power Adapter
plug into the port on the side of the Docking
Station, then plug the other end into the wall
outlet. Turn the robot’s Power Switch ON
and put on the Docking Station. The first
charge will take 4-5 hours.
1
4 5
2
Connecting to the App
In the App or Google
Play Store search
“BISSELL Connect” and
download.
From the app, select “Add Product”. Then choose
your product from the menu.
Note: Be sure the device is near your WiFi router
and the robot is fully charged or in the dock
during the pairing process.
Once downloaded, open
the app and sign in or
create a new login.
Make sure you’re near
your WiFi router before
turning the robot ON (I).
Downloading the BISSELL Connect App means you can change your robot’s cleaning
mode, start, pause, or stop your robot, schedule cleanings, view notifications, track your
cleaning history, and troubleshoot all from the palm of your hand.
To put the robot in pairing mode,
press and hold the Start/Pause
Button for 5 seconds until you
hear a single beep.
80 inches
(2m)
40 inches
(1m)
40 inches
(1m)
40 inches
(1m)
40 inches
(1m)
40 inches
(1m)

4BISSELL.eu
1 32
Manual Cleaning
Automatic Cleaning
Press the Power Switch
to the ON (I) position.
To return the robot to
the dock, press the
Start/Pause Button
twice. The button will
flash white as it finds its
way back to the dock.
Press the Start/Pause
Button on the top of the
robot to start cleaning.
When finished, press the
Start/Pause Button again
to stop the robot.
You can designate a day and time for your robot to run automatically using the BISSELL
Connect App. Once the robot is connected to the app, go to the Schedule tab and follow
the on-screen prompts.
Connecting to the App (cont.)
6 7
The QR code needed for setup can be
found by removing the Dirt Bin and
turning the robot over.
Once you locate and scan the QR
code, follow the instructions in the app
to pair.
Scan
Code

5
BISSELL.eu
1
4 6
1
32
5
2
Cleaning the Dirt Bin
Press the button on top
of the Dirt Bin and pull
to remove.
Use the Cleaning Tool
to brush the filter cover
and filters. Do not wash
the filters.
Open the filter door by
pulling both sides apart.
Empty debris from the
Dirt Bin.
With filters removed,
rinse the Dirt Bin with
tap water. Ensure Dirt
Bin is completely dry
before reinstalling. It is
not necessary to wash
every time.
Do not machine wash
the Dirt Bin.
Once clean, reinstall the
filters and filter cover,
close and push back
into the machine.
Remove the filter cover,
then the Foam and
Pleated Filters.
Activating Low Power Mode
Press and hold the Start/Pause Button for
15 seconds until you hear 2 beeps. Release
the button to activate low power mode.
Send the robot back to the dock.
15s

6BISSELL.eu
A Phillips-head screwdriver is required for this task.
1 2
Use a Phillips-head screwdriver to
remove the screw. Pull up on the base
of the brush.
Push the brush directly onto the
holder. Replace the screws with a
Phillips-head screwdriver.
Replacing the Edge Cleaning Brushes
NOTE: After being used for a period of time, the Edge Cleaning Brushes need to be cleaned
to work more eectively. Once removed, the Edge Cleaning Brushes can be rinsed or soaked
in water. Be sure they are completely dry before returning to the machine.
31
4
2
Clean the Brush Roll
with the Cleaning Tool.
Replace the Brush Roll and
brush guard.
NOTE: The Brush Roll has
two different end pieces.
Ensure the square-shaped
end piece is inserted into the
square-shaped port.
Pinch the tabs on the
brush guard inward and
pull to remove.
Lift to remove the
Brush Roll.
Cleaning the Brush Roll
WARNING
To reduce the risk of electric shock, turn Power Switch OFF and disconnect plug from electrical outlet
before performing maintenance or troubleshooting checks.

7
BISSELL.eu
21
3 4
Replacing the Battery
DO NOT REMOVE THE PLASTIC SHRINK
SLEEVE FROM THE BATTERY PACK.
Install the
new battery
into battery
compartment.
Use a
Phillips-head
screwdriver
to replace
the battery
cover and two
screws.
A Phillips-head screwdriver is
required for this task.
Turn the
Power Switch
OFF (0). Use
a Phillips-head
screwdriver
to remove the
two screws
and battery
cover.
Remove the old battery from battery
compartment. Note the tape location
that covers over the connectors.
Remove the tape by unwrapping, then
separate the connectors.
Connect the new battery. Wrap
the tape to the original location to
completely cover the connectors and
terminals.
After repeated use, debris can accumulate on the
sensors of the robot and the robot’s performance
could be affected.
To ensure the best efficiency, the sensors should
be cleaned off periodically by brushing any debris
from them.
Before cleaning the sensors, ensure the Power
Switch on the robot is in the OFF (0) position.
Cleaning the Sensors
WARNING
To reduce the risk of electric shock, turn Power Switch OFF and disconnect plug from electrical outlet
before performing maintenance or troubleshooting checks.

8
Storing Your Robot
Status and Error Notifications
Status Button Light State Light Ring Sound
Power ON Pulse Once > Blink > On Pulse Once Activation Sound
Cleaning Blink > Fade In > On Pulse Once > Fade In > 30 seconds > Fade Out Activation Sound
Charging Breathing Pulse Once > Breathing for 30 seconds > Off 1 Beep
Pairing Mode Blink Off 1 Beep
Paired On Solid for 5 Seconds > Fade Out 3 Beeps
Low Battery Blinking White Off 2 Beeps
Error Button Light State Sound Remedies
Robot is Trapped, Lifted, or
Cli Sensors are Dirty
Flashing Red 1 Beep Place robot on floor away from objects and
resume cleaning. If error persists, use a dry cloth
to clean the 3 cliff sensors on the bottom of the
robot.
Front Caster Wheel Sensor is Blocked Flashing Red 3 Beeps Remove Front Caster Wheel assembly, clear
debris from assembly housing, reinstall wheel.
Left or Right Wheel is Stuck Flashing Red > Solid Red 1 Beep Turn robot OFF and remove hair and debris from
wheels.
Edge Cleaning Brushes are Stuck Flashing Red > Solid Red 2 Beeps Turn OFF the robot and remove hair and debris
from Edge Cleaning Brushes.
Brush Roll is Stuck Flashing Red > Solid Red 3 Beeps Turn OFF the robot and remove hair and debris
from Brush Roll.
Bumper is Stuck or Robot is Trapped
Flashing White 2 Beeps Turn OFF the robot and tap the Bumper several
times to release any debris that may have
accumulated.
Error Notifications
Status Notifications
Store your robotic vacuum cleaner safely indoors where it is unlikely to be damaged.
©2020 BISSELL Inc. All rights reserved.
Part Number 1625231 07/20