Bissell PROHEAT PET ADVANCED 1799 Series User manual

1. The only tool you will
need to assemble your
deep cleaner is a Phillips
screwdriver.
2. First, slide the Upper
Handle on to the base.
3. a.) From the flat side of
the Tool Caddy, feed the
Power Cord through the
rounded-rectangle opening.
b.) Align the Tool Caddy with
the Upper Handle holes.
4. a.) Insert 2 screws into
lower 2 holes above Lower
Hose Rack and turn until
tightened. b.) Place hex nuts
into back of Tool Caddy and
tighten bolts from the front.
Do not over tighten.
5. Attach tools to the end
of the hose or front of the
upper handle. Wrap the
power cord and hose.
Assembly Instructions
WARNING
Refer to the enclosed user guide for complete
instructions and important safety notices.
PROHEAT®PET
QUICK START GUIDE 1799 SERIES
160-8121 Rev 10/15
PARTS INCLUDED 1. 2.
3.
4.
5.
7.
1. Upper Handle
2. 4 Screws Taped to Upper Handle
3. Deep Cleaner Base
4. Tool Caddy
5. Hex Nuts
6. BISSELL Deep Cleaning formula
7. Nozzle Clean Out Tool
NOTE: Not all accessories come with every model. Be sure to check the carton for additional tools.
6.
a.
b. a.
b.

Deep Cleaning Tips &Tricks
›› BISSELL®Boost OXY
Life makes messes,
especially on carpet. OXY
boost removes those
stains from your life –
permanently. Tough stains
are no match for this
oxygen formula.
Bst Your
DEEP CLEAN
with oxy formulas designed to
maximize the performance of
your deep cleaning machine.
QUICK START GUIDE For further instructions
reference the User Guide or visit
www.BISSELL.com
›› BISSELL® Boost PET OXY
PET OXY boost removes
pet stains and odors per-
manently. Enjoy life with
your pet, stain and odor
free!
Special Features
Flow Indicator
This is located on the machine base. It spins
when the trigger is pressed to indicate that
the machine is applying cleaning solution to
the carpet and will stop spinning when the
formula tank or bladder needs to be refilled,
or when the trigger is released.
ReadyTools Dial
This dial switches your machine between
floor cleaning and hose/tool cleaning.
SmartMix®
The SmartMix®feature automatically mixes
hot tap water with the BISSELL Advanced
cleaning formula. Choose one of the 3 set-
tings and the SmartMix®will adjust the
right amount of cleaning formula to mix
with the hot water to fit your cleaning need.
2-in-1 Tank ™
Our 2-in-1 Tank™ system is designed with a
heavy duty bladder inside for clean water.
As you clean, the clean water in the blad-
der will empty and mix with the cleaning
formula. Dirty water will be pulled out of
your carpets and collect around the out-
side of the bladder so that clean and dirty
water are always kept separate. This allows
you to maximize tank space, yet only carry
one tank to and from the sink for filling and
emptying.
1.
2.
3.
4.