Bittel HA9888TSD-T User manual

_________________________________________________ NEO 62 SERIES
BITTEL
User Manual
HA9888(62)TSD-T
HA9888(62)TSD-T (U)
Followed description maybe different from the real device. Please
keep the real device as the criterion. The telephone is subject to
change without notice. In order to fully use this device please
read this manual carefully.
We bring good things to Hospitality.

_________________________________________________ NEO 62 SERIES
Thank you for purchasing Bittel product.
MAIN FEATURES
This is Bittel’s NEO series telephone, which is specially designed to meet the
need of hotel guestroom. NEO is made of first class electrical materials, awarded
several patents, which give NEO a variety of functions and magnificent
appearance. NEO consists of two types of phones, the classical version and the
charging version, which can charge for some mobile devices. The model number
of charging version are HA9888(62)TSD-S(U) and HA9888(62)TSD-T(U).
Some features as below:
●10 speed dial memory keys
●Program memory keys with R.P master cloner and handheld cloner
●Push-draw style individuation faceplate ,easy printing the hotel logo and user
guide
●Message waiting light compatible with main PBX, MWL indicator and
withdraw feature
●Hearing aid compatible handset
●Speaker and handset volume in three level control
●Ringer volume to high or low control, two line control intelligently
●Default 600ms hook switch flash, adjustable and store
●Busy tone disconnect automatically
●Redials the last number dialed and dialed number disappear within 5 minutes
●Hold current call in waiting mode
●SPEAKER
●Three-way Conference
●Charging for iPhone, iPod, and some other mobile devices ( Charging
Version)
INSTALLATION
1. Install telephone cord
Insert the one end of the straight line cord into the jack labeled “TO TEL” ,
then insert the other end of the line cord into a telephone wall jack.
2. Install Power and Telephone cord ( Charging Version)
First please connect the T-Cable’s power jack (Marked 1 in the below figure)
with the power adaptor. Then please connect the T-Cable’s RJ11 (4 pin.
Marked 2 in the below figure) with the telephone line jack in the room. Finally
please connect the T-Cable’s RJ11 port (6 pin. Marked 3 in the below figure) to
telephone set’s “TO TEL” port, which is on the back of the phone.

_________________________________________________ NEO 62 SERIES
3. Matters Need Attention
●Adopt magnetic switch instead of traditional mechanical switch, please far
away from magnetic field.
●Do not use it in extreme temperatures.
●Do not use aerosol polish, abrasive cleaners.
●Do not tamper with or attempt to modify the phone, it would make it unsafe to
use.
●Handle with care, avoiding hard knocks and shocks.
●If there is any fault please contact your distributor for repair and other service.
HOW TO USE
How to use the telephone
1.Receiving a call
Using the Handset
When the phone rings, the corresponding line’s indicator flashes rapidly.
1) Pick up the handset.
The line is automatically selected.
2) To end the call, hang up by replacing the handset.
Using the speaker phone.
When the phone rings, the corresponding line’s indicator flashes rapidly.
1) Press the [SPKR] key.
2) The speakerphone comes on automatically and selects a line.
3) Press [SPKR] when finished.
Speakerphone Tips
To activate the handset from speakerphone mode:
Lift the handset.

_________________________________________________ NEO 62 SERIES
To activate the Speakerphone from handset mode:
1) Press the [SPKR] key.
2) Hang up the handset.
2. Adjust the call volume
During the call, press VOL+/- key to adjust the volume level of handset and
speaker. Handset volume resume to low level and speaker stored the current
level after the telephone on-hook.
3. Handset call and speaker call inter-converting
a．From handset to speaker
Just press SPKR key and put the handset on the cradle
b．From speaker to handset
Just lift handset
4. Three way conference
a. Press HOLD key to hold the current line then connect another line, after that
please press CONF key enter into three way conference mode. On-hook status
to finish the conference.
b. In conference mode, press the accordance LINE key to relieve the
conference mode and talk with one party. Or press HOLD key to hold the two
lines and then press the desired line key to talk with the selected line, then press
CONF key to resume the conference mode.
5. To redial the last number dialed
Press REDIAL key to dial the last number dialed but after five minutes the
number will disappear automatically.
6. Using the hold key
Off-hook mode, press HOLD key (the accordance LED indicator light) and put
the handset back, the current line in hold mode, off-hook again can relieve the
hold mode.
If paralleled telephone answer the call, the original phone will detect the current
status and relieve the hold mode and realize on-hook.
7. Mute
During the call, press MUTE key once to stop the sending for handset and
speaker, press it again to relieve the mute mode and resume the calling.

_________________________________________________ NEO 62 SERIES
8. Adjust ringer volume
With the adjustment control which locate on the back of the telephone to adjust
the ringer to Low or Hi.
9. Busy tone disconnect automatically
If the handset not on cradle after a phone call, this device can on-hook
automatically after getting busy signal within a definite time. Then the line will
connect accordingly.。
10. Using one touch memory keys
Off-hook mode, press each memory keys to dial the number directly.
Store the memory number:
On-hook mode, press HOLD key+ desired number+ HOLD key+ memory key
11. MWL
Off-hook mode, press this key can dial the stored number directly, withdraw the
message and other service.
On-hook mode press this key can realize off-hook and dial the stored number
directly, Press it again can realize on-hook mode.
(For USA market, withdraw message indirectly)
Store the message number:
On-hook mode, press HOLD key + desired number +HOLD +MWL key
12. Programming Memory Keys
For this part please kindly refer the manual of Bittel Handheld cloner and R.P
master cloner.
CHARGING FEATURE
1.Two USB Charging Connectors, which can be used to charge for some mobile
devices through USB Charging Cable.
1)iPod USB Connector(Marked 4)---Charging for Apple Devices
2)USB CHARGE(Marked 5)—Charing for mobile devices.
4 5
2. Multi-Function Charging cable

_________________________________________________ NEO 62 SERIES
1) Micro USB Connector is used to charge for the mobile devices with
Micro USB Connector.
2) Mini USB Connector is used to charge for the mobile devices with MiNi USB
Connector.
3) Appel Dock & Lighting Connector is used to connect Apple devices, such as
iPod/iPad /iPone4/ mini iPad/ iPhone5；
a.Appel Dock is used to charge for iPod, iPhone, etc.
b.lightning connector is used to charge for iphone5 , Mini iPad,etc.
Multi-Function Charge Cable
8.Lightning Connector 9. USB Charging Port
10. Charging Connection Cable 11. Apple DOCK 12. USB Charging Port
Note: The max output is DC5V/2A.
Maintenance and troubleshooting
1. No dialing tone of handset
Check the telephone network,
Check the connection of handset cord and straight line cord
2. No ringing or no continually ring
Check the telephone line
Check the quantity of parallel phone set
3. Noise during talk
Check the telephone line
Check the handset cord
FCC APPROVAL
Complies with Part 68 of the FCC rules. On the bottom of this telephone is a label
that contains, among other information, the FCC registration number and the

_________________________________________________ NEO 62 SERIES
ringer equivalence number (REN) for this telephone. If requested, you must
provide this information to the Telephone Company.
CE APPROVAL
Complies with CE approval.
JACKS
Use RJ11C USOC standard modular jacks.
WARRANTY
This product is warranted for a period of 12 months from the date of purchase
against faulty materials or workmanship. If during this period a defect arises, we
may repair or replace the product, at Bittel’s discretion, provided that:
1) The product has not been used for any purpose other than normal use,
2) Unauthorized product repair or modifications have not been attempted.
3) The product has never been used in a harsh or corrosive environment.
4) No damage in transit
THIS LIMITED WARRANTY GIVES THE BUYER SPECIFIC LEGAL RIGHTS.
THE BUYER MAY ALSO HAVE OTHER RIGHTS WHICH VARYFROM
JURISDICTION TO JURISDICTION.
This warranty is only valid for merchandise purchased directly from Bittel or
dealers or distributors Bittel Co. authorized .
FCC WARNING
This device complies with part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) This device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that
may cause undesired operation.
CONTACTING BITTEL
Telephone: [phone]
Internet: www.bittelgroup.com www.hotelphone.com
Email: [email protected]
Address: Shandong Bittel Intelligent Technology Co., Ltd.
No. 1 Rizhao North Road, Rizhao,
Shandong, 276800, China
Copyright © 2013 Bittel Inc. All rights reserved. V2