Bittel UNOMedia 77 User manual

_______________________________________________________________________
BITTEL Page 1 of 7 UNOMedia 77 SERIES
BITTEL
User Manual
For
UNOMedia 77
Model Number:
HA9888(77)TSD-S
HA9888(77)TSD-T
Followed description maybe different from the real device. Please
keep the real device as the criterion. The telephone is subject to
change without notice. In order to fully use this device please
read this manual carefully.
We bring good things to Hospitality.

_______________________________________________________________________
BITTEL Page 2 of 7 UNOMedia 77 SERIES
Thank you for purchasing a Bittel product.
MAIN FEATURES
UNOMedia 77 (shorted for UM 77) is a kind of Multi-Media device, which is
specially designed to meet the need of hotel guestroom. UM 77 is made of first
class electrical materials, awarded several patents, which give UM 77 a variety of
functions and magnificent appearance.
Some features as below:
●9 speed dial memory keys
●Program memory keys with R.P master cloner and handheld cloner
●Push-draw style individuation faceplate ,easy printing the hotel logo and user
guide
●Message waiting light compatible with main PBX, MWL indicator and
withdraw feature
●Hearing aid compatible handset
●Speaker and handset volume in three level control
●Ringer volume to high or low control, two line control intelligently
●Busy tone disconnect automatically
●Redials the last number dialed and dialed number disappear within 5 minutes
●Hold current call in waiting mode
●Mute
●SPEAKER
●LINE1, LINE2 and Conference （Two Line）
●Alarm , Radio, Audio, Bluetooth and Power charge in one device
●Easy ports to connect iPod, MP3 audio device, premium stereo acoustics
●Four USB Charging ports for portable type iPod and mobile device
●Adjust clock time with special wireless timing cloner
INSTALLATION
1. Install handset cord
First please correctly install the handset cord. The connector is on the left side
of the device.
2. Install Power
Please connect the adaptor with the DC port, which is on the back side of
the device.

_______________________________________________________________________
BITTEL Page 3 of 7 UNOMedia 77 SERIES
3. Install telephone cord
Please connect one end of the straight line cord into the jack labeled “TO
TEL”, then connect the other end of the line cord into a telephone wall jack.
4. Matters Need Attention
●Adopt magnetic switch instead of traditional mechanical switch, please far
away from magnetic field.
●Do not use it in extreme temperatures.
●Do not use aerosol polish, abrasive cleaners.
●Do not tamper with or attempt to modify the phone, it would make it unsafe to
use.
●Handle with care, avoiding hard knocks and shocks.
●If there is any fault please contact your distributor for repair and other service.
LOCATION AND CONTROL
1 2
A BC 3 D EF
4
G H I 5 JKL 6 M N O
7
PQ R S 8 TU V 9 W XY Z
TO N E 0
O PER #
H O LD M U TE RED IA L
SPKR
A LA R M SET SN O O ZE Bluetooth LIN E IN RA D IO TUN IN G + TU N IN G
-
1
1
2
3
4
6
7
8
LIN E 1
3
LINE IN
5

_______________________________________________________________________
BITTEL Page 4 of 7 UNOMedia 77 SERIES
TO TEL
DC
RINGER1
HI
10 9 11
RINGER2
HI
www.bittelphone.com
12
1 Function keys and Message Waiting Light
2. Digital keys
3. Hearing aid compatible handset and handset jack.
4. Display window——Display the Time, Alarm and Audio
5. Infrared Receiving Area ----- Receive the signal of the Infrared Time Control,
for adjusting time
6. Paper faceplate—— For printing hotel logo and user guide.
7. Speed-dial memory keys
8. Function keys of acoustics—— For realizing the features of the acoustics.
9. Ring Volume button——Adjust phone ringer volume Hi or Low
10. To Tel port
11. Power Jack
12. Battery box——Support continue power to clock when no outside power.
HOW TO USE
How to use the telephone
1. Adjust the call volume
During the call, please press to adjust the volume level of
handset and speaker. Handset volume resume to low level and speaker
stored the current level after the telephone on-hook.
In acoustics status, please press to adjust acoustics’ volume.
2. Handset call and speaker call inter-converting
1) From handset to speaker:
Just press SPKR key and put the handset on the cradle
2) From speaker to handset:
Just lift handset
3. Receiving new call
1) When the phone rings, please press Speaker or pick up handset to answer the
call;

_______________________________________________________________________
BITTEL Page 5 of 7 UNOMedia 77 SERIES
2) For two line mode, when one line has a call and another new call coming, just
press the accordance line key to answer the new call and another line hang up
automatically.
Press the HOLD key if users like to hold the current call, then press the
accordance line key to resume.
4. Three way conference (Two Line)
1) Press HOLD key to hold the current line then connect another line, after that
please press CONF key enter into three way conference mode.
2) In conference mode, press the accordance LINE key to relieve the conference
mode and talk with one party. Or press HOLD key to hold the two lines and then
press the desired line key to talk with the selected line, then press CONF key to
resume the conference mode.
5. To redial the last number dialed
Press REDIAL key to dial the last number dialed but after five minutes the
number will disappear automatically.
6. Using the HOLD key
Off-hook mode, press HOLD key (the accordance LED indicator light) and put the
handset back, the current line in hold mode, off-hook again can relieve the hold
mode.
If paralleled telephone answer the call, the original phone will detect the current
status and relieve the hold mode and realize on-hook.
7. Mute
During the call, press MUTE key once to stop the sending for handset and
speaker, press it again to relieve the mute mode and resume the calling.
8. Adjust Ringer Volume
With the adjustment control which locate on the back of the telephone to adjust
the ringer to Low or Hi.
9. Busy tone disconnect automatically
If the handset not on cradle after a phone call, this device can on-hook
automatically after getting busy signal within a definite time. Then the line will
connect accordingly.

_______________________________________________________________________
BITTEL Page 6 of 7 UNOMedia 77 SERIES
10. Using Speed Dial Memory Keys
Off-hook mode, press each memory keys to dial the number directly.
Store the memory number:
On-hook mode, press HOLD key+ desired number+ HOLD key+ memory key
11. MWL
Off-hook mode, press this key can dial the stored number directly, withdraw
the message and other service.
On-hook mode press this key can realize off-hook and dial the stored number
directly, Press it again can realize on-hook mode.
(For USA market, withdraw message indirectly)
Store the message number:
On-hook mode, press HOLD key + desired number +HOLD +MWL key
12. Programming Memory Keys
For this part please kindly refer the manual of Bittel Handheld cloner and R.P
master cloner.
Maintenance and troubleshooting
1. No dialing tone of handset
Check the telephone network,
Check the connection of handset cord and straight line cord
2. No ringing or no continually ring
Check the telephone line
Check the quantity of parallel phone set
3. Noise during talk
Check the telephone line
Check the handset cord
4. Charging Feature Failure
1) Please check if the power is well connected
2) Please check if the adaptor is well connected
FCC APPROVAL
Complies with Part 68 of the FCC rules. On the bottom of this telephone is a label
that contains, among other information, the FCC registration number and the
ringer equivalence number (REN) for this telephone. If requested, you must
provide this information to the Telephone Company.
CE APPROVAL

_______________________________________________________________________
BITTEL Page 7 of 7 UNOMedia 77 SERIES
Complies with CE approval.
JACKS
Use RJ11C USOC standard modular jacks.
WARRANTY
This product is warranted for a period of 12 months from the date of purchase
against faulty materials or workmanship. If during this period a defect arises, we
may repair or replace the product, at Bittel’s discretion, provided that:
1) The product has not been used for any purpose other than normal use,
2) Unauthorized product repair or modifications have not been attempted.
3) The product has never been used in a harsh or corrosive environment.
4) No damage in transit
THIS LIMITED WARRANTY GIVES THE BUYER SPECIFIC LEGAL RIGHTS.
THE BUYER MAY ALSO HAVE OTHER RIGHTS WHICH VARYFROM
JURISDICTION TO JURISDICTION.
This warranty is only valid for merchandise purchased directly from Bittel or
dealers or distributors Bittel Co. authorized.
FCC WARNING
This device complies with part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) This device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that
may cause undesired operation.
CONTACTING BITTEL
Telephone: [phone]
Internet: www.bittelgroup.com
Email: i[email protected]
Address: Shandong Bittel Intelligent Technology Co., Ltd.
No. 1 Rizhao North Road, Rizhao, Shandong, 276800, China
Copyright © 2014 Bittel Inc. All rights reserved. V2