Blackrock Microsystems Omnetics32 PN-9370 User manual

Omnetics32 DAB Adapter
User’s Manual
Empowering Electrophysiology
LB-0750 1.00
©2015 Blackrock Microsystems®, LLC
Blackrock
Omnetics32 DAB Adapter
PN-9370
Blackrock Microsystems, LLC
630 Komas Drive • Suite 200
Salt Lake City • UT 84108
T: [phone]
www.blackrockmicro.com
[e-mail]

2
Empowering Electrophysiology
Omnetics32 DAB Adapter
User’s Manual
LB-0750 1.00
©2015 Blackrock Microsystems®, LLC
1 Introduction
The Omnetics32 DAB (DNSS Adapter Board) adapter provides an interface between the accessory
port on the Digital Neural Signal Simulator (DNSS PN-8282) and four 32-ch Omnetics connectors.
This allows a device with up to 4 32-Ch Omnetics connectors to simultaneously test all channels.
For research use only. Not for Human Use.
2 Hardware
2.1 Adapter Pin-Out

3
Empowering Electrophysiology
Omnetics32 DAB Adapter
User’s Manual
LB-0750 1.00
©2015 Blackrock Microsystems®, LLC
3 Warranty
Blackrock Microsystems warrants that its products are free from defects in materials and
manufacturing for a period of one year from the date of shipment. Blackrock will, at its option,
repair or replace any product that does not comply with this warranty. This warranty is voided
by:
1. Any modification or attempted modification to the product done by anyone other than an
authorized Blackrock employee
2. Any abuse, negligent handling or misapplication of the product.
This constitutes the sole warranty made by Blackrock, There are no other warranties,
expressed or implied, which extend beyond those described herein or to anyone other than the
original purchaser, including the implied warranties of merchantability and fitness for a
particular purpose. In no event shall Blackrock Microsystems, be liable for any incidental or
consequential damages, or for the infringement of any patent rights or third party rights due to
the use of its products.
3.1 Return Merchandise Authorization (RMA)
In the unlikely event that your adapter needs to be returned to Blackrock for repair or
maintenance, do not send any equipment back without a Return Merchandise Authorization
Number. An RMA number will be issued to you by a Blackrock representative. If you need to
obtain an RMA number, you may contact a product support representative at [phone]
or toll free at [phone].
Once an RMA number has been issued, it is important to safely pack the returned item for
shipping back to Blackrock. It is preferred that you save the original boxes and packing
materials that your system arrived in for return shipment. Please address the package as
follows:
Blackrock Microsystems
ATTN: RMA#
630 Komas Drive, Suite 200
Salt Lake City, UT 84108 USA
Tel: [phone]