
Blau Aquarisc Mul-Dosing Pump
The Blau Aquarisc Mul-dosing Pump is a three peristalc dosing pumps System expandable up to eleven (4 pumps
more for each expansion module), which allows administer automacally liquids in doses from 1 to 99ml.
Before the installaon and use of this pump, we recommend to read and understand these instrucons.
Features:
- Clock and memory in case of power cut
- Calibraon funcon
- Weekly programming
- Alarm funcon in case of motor breakdown or lack of liquid in the container
Package content:
- Central unit with programmable controller and 3 peristalc dosing pumps.
- 3 plasc connectors and 3 check valves
- Power source, 12V power adapter
- Transparent tube
- Measuring cylinder for calibraon
Descrip i n:t o
Programming instrucons
Time seng
Enter the actual day and hour: press the buon “me” and the day will blink, press “+” or “-“ for select the correct
day. Then press the arrow for select hour, minutes or seconds. Through buons “+” and “-“” adjust the hour. When
the suitable hour is set, press “me” for two seconds, and the hour will be fixed.
Calibraon
Press “Cal” buon for entry in calibraon mode. |01 50 10| will be showed in the screen. The pump 1 will start
dose. Use the calibraon cylinder for measure if it's exactly 10ml. If the dose is lower, press “+” and repeat the
measurement. Undertake this operaon unl obtain the expected result. If the measure is upper than 10ml, you
can correct it with “-“ buon. Press “pump” buon to pass to the second pump and perform the same operaon.
Finally press “Cal” for see the calibraon menu.
Pump programming
Select the pump to programme pressing buon “pump”. When a pump is selected, the central two digits will
blink, the pump number is on the top le of the screen. The first number blinking is the dosing starng me,
which can be modifiable between 00 and 23.
The next value to select is the number of doses (two digit number in the top right in the screen). Choose the
value with “+” and “-“. Then the value will be included to the total value of the daily dose, which is in the boom
of the screen.
The next screen shows numbers from 1 to 7, that means the days of the week. Select the value 0 in the place of
the days without dosing.
Finally is possible to determine the volume of liquid in the container which feeds each pump. When the dosing
volume will be bigger that the dosing volume in the container, the System will acvate a warning buzz for fill it.
Manual operaon
Press buon “P” for switch on the screen in manual mode. Press “P” for prime the pump or select manual mode.
Select pump with buon “pump”. Press twice the “P” buon for exit this mode.
Note: the System mer Works without electric current.
If two pumps have to dose at same me, the second one will have a me delay of 2 minutes.
If a motor is broken, the screen will show its number and will buzz unl it will be repaired.
Warning
1. The system will work with the adequate liquids, avoid the thick liquids, liquids that can precipitate or
extremely corrosive substances.
2. Regularly check the tubes and replace them if they show signs of deterioraon.
3. Avoid the pump from operang with high levels of humidity.
4. Don't submerge the pump in the water, avoid water splashes.
RECYCLING
Do not throw this dosing pump into rubbish bins, it must be placed in a waste treatment plant..
W YARANT
This product has a warranty of 2 years for any manufacturing defect.
The warranty does not cover:
-Product failures caused by a wrong use.
-Product failures caused by a wrong installaon.
-Product failures due to a connuous operaon.
- ransport costs to the repair centre.T
For use the warranty, it is necessary accompany the product with his purchasing receipt.
aquaristic
aquaristic
AB
DC12V
Back of the unit
A,B: 12 connectors for RJ
auxiliary units
Select an adjustable pump/ le cursor
Pump calibraon/adds 1 unit
Time mode selector/substracts 1 unit
Manual operaon of a pump/right cursor
TIME MON
1 8 : 4 5 : 5 0
aquaristic